{"title":"Trade Tool Kits","description":"\u003cp\u003eKits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.\u003c\/p\u003e","products":[{"product_id":"teng-tools-torque-wrench-pair-3-8-and-1-2-inch-drive-bdl-torque-pair","title":"Teng Tools Torque Wrench Set, 3\/8 Inch Drive 15 to 80 ft-lb Torque Wrench and 1\/2 Inch Drive Torque Wrench for Car and Light Truck - BDL-TORQUE-PAIR","description":"\u003cp\u003eThis Teng Tools bundle puts two torque wrenches in one order for car and light truck work. Between them they cover most fasteners on those vehicles: the 3\/8 inch drive for 15 to 80 ft-lb engine and accessory bolts, and the 1\/2 inch drive for heavier chassis and suspension work.\u003c\/p\u003e\u003cp\u003eThe 3\/8 inch drive wrench (3892UAG-E3) is a 15 to 80 ft-lb torque wrench with an adjustable setting. It is designed for tightening fasteners to a precise value, which is what a service manual asks for on engine and accessory hardware.\u003c\/p\u003e\u003cp\u003eThe 1\/2 inch drive wrench (1292UAG-EP) is designed for applying a specific, user-set torque when tightening fasteners. Use it on the larger chassis and suspension bolts, where the bigger drive suits the sockets those fasteners take. Together they make an automotive torque wrench pair that follows the job from the engine bay to the wheel arches.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/8 Inch Drive Torque Wrench, 15 to 80 ft-lb (3892UAG-E3), quantity 1\u003c\/li\u003e\n\u003cli\u003e1\/2 Inch Drive Torque Wrench (1292UAG-EP), quantity 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBoth are standard Teng Tools products, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003eFor a technician, a fleet maintenance bay or a home mechanic who works to the book, this is the pair to keep on the bench when a job sheet lists torque values for both engine and chassis fasteners.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTORQUE WRENCH 3\/8 DRIVE, 15 TO 80 FT-LB — The 3892UAG-E3 is a 3\/8 inch square drive torque wrench with an adjustable setting from 15 to 80 ft-lb. That range suits the engine and accessory bolts on a car or light truck, the fasteners a service manual gives a torque value for. Set the figure from the manual, tighten each bolt to it, and move on to the next one with the same setting.\u003c\/li\u003e\n\u003cli\u003eTORQUE WRENCH 1\/2 DRIVE FOR CHASSIS WORK — The 1292UAG-EP is a 1\/2 inch square drive torque wrench for the heavier chassis and suspension fasteners on the same vehicles. It is designed for applying a specific, user-set torque when tightening, so the larger bolts under the vehicle get the same controlled treatment as the smaller ones under the hood, on the bigger drive those sockets call for.\u003c\/li\u003e\n\u003cli\u003eWHAT IS IN THE BOX — Two separate Teng Tools products, shipped together as one order: one 3\/8 Inch Drive Torque Wrench, 15 to 80 ft-lb (3892UAG-E3) and one 1\/2 Inch Drive Torque Wrench (1292UAG-EP). Each is a standard Teng Tools product, the same wrench listed on its own under that part number, so the pair arrives ready to use with your existing sockets.\u003c\/li\u003e\n\u003cli\u003eTWO DRIVE SIZES COVER MOST FASTENERS — Between them, these torque wrenches cover most fasteners on a car or light truck. The 3\/8 inch drive handles the lighter engine and accessory bolts, and the 1\/2 inch drive takes the heavier chassis and suspension work, so a service job that lists values for both ends of the vehicle is covered without borrowing a wrench from the next bay.\u003c\/li\u003e\n\u003cli\u003eSHIPS FROM FORT WORTH, TEXAS — Both wrenches ship together from Fort Worth, Texas, as one order for the workshop, fleet maintenance bay or home garage. Teng Tools hand tools carry a lifetime warranty against manufacturing defects. Two part numbers, one delivery, and the drive sizes most automotive service work is written around, ready for the next engine, chassis or suspension job.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-TORQUE-PAIR\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565010305367,"sku":"BDL-TORQUE-PAIR","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero.jpg?v=1792801477"},{"product_id":"teng-tools-torque-wrench-set-1-4-3-8-and-1-2-inch-drive-bdl-torque-trio","title":"Teng Tools Torque Wrench Set, 1\/4 Inch Drive 40 to 250 in-lb Inch Pound Wrench, 3\/8 Inch Drive 15 to 80 ft-lb and 1\/2 Inch Drive - BDL-TORQUE-TRIO","description":"\u003cp\u003eOne torque wrench for each common drive size, bought as one order. This Teng Tools bundle covers the 1\/4 inch drive for 40 to 250 in-lb small fasteners, the 3\/8 inch drive for 15 to 80 ft-lb, and the 1\/2 inch drive for heavier work. It is for a technician who wants every torque spec on the job covered without reaching for a wrench that is out of its range.\u003c\/p\u003e\u003cp\u003eThe 1\/4 inch torque wrench (1492UAG-E) is set in inch pounds, adjustable from 40 to 250 in-lb, for controlled tightening of small fasteners. The 3\/8 torque wrench (3892UAG-E3) is adjustable from 15 to 80 ft-lb and is designed for tightening automotive and equipment fasteners to a precise value. The 1\/2 inch drive wrench (1292UAG-EP) is designed for applying a specific, user-set torque on heavier fasteners.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4 Inch Drive Torque Wrench, 40 to 250 in-lb (1492UAG-E), quantity 1\u003c\/li\u003e\n\u003cli\u003e3\/8 Inch Drive Torque Wrench, 15 to 80 ft-lb (3892UAG-E3), quantity 1\u003c\/li\u003e\n\u003cli\u003e1\/2 Inch Drive Torque Wrench (1292UAG-EP), quantity 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003eFrom inch-pound values on small hardware to the heavier bolts that need the 1\/2 inch drive, the three wrenches give a workshop or a mobile technician one wrench per drive size and one place to look for the right one.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4 TORQUE WRENCH FOR SMALL FASTENERS — The 1492UAG-E is a 1\/4 inch square drive torque wrench, adjustable from 40 to 250 in-lb, for small fasteners that must be tightened to a specified torque. Its range starts well under the 15 ft-lb bottom setting of the 3\/8 inch drive wrench, so small fasteners get a wrench built for their values instead of a larger one set outside its range.\u003c\/li\u003e\n\u003cli\u003eTORQUE WRENCH 3\/8 DRIVE, 15 TO 80 FT-LB — The 3892UAG-E3 covers the middle of the job with a 3\/8 inch square drive and an adjustable setting from 15 to 80 ft-lb. It is designed for tightening automotive and equipment fasteners to a precise value, which covers the engine and accessory hardware between the small fasteners and the heavy ones.\u003c\/li\u003e\n\u003cli\u003eTORQUE WRENCH 1\/2 DRIVE FOR HEAVIER WORK — The 1292UAG-EP is a 1\/2 inch square drive torque wrench for heavier fasteners. It is designed for applying a specific, user-set torque when tightening, so the larger bolts on a job get the same controlled method as the small ones, on a drive size that suits the bigger sockets those fasteners take.\u003c\/li\u003e\n\u003cli\u003eWHAT IS IN THE BOX — Three torque wrenches, each a separate Teng Tools product, shipped together: a 1\/4 Inch Drive Torque Wrench, 40 to 250 in-lb (1492UAG-E), a 3\/8 Inch Drive Torque Wrench, 15 to 80 ft-lb (3892UAG-E3) and a 1\/2 Inch Drive Torque Wrench (1292UAG-EP). Each is the same wrench Teng Tools sells on its own.\u003c\/li\u003e\n\u003cli\u003eONE TORQUE WRENCH KIT FOR EVERY DRIVE — For a technician who wants every torque spec on the job covered, this kit puts one wrench on each common drive size, from inch-pound values on small fasteners up to the heavier 1\/2 inch drive work. All three ship together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-TORQUE-TRIO\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565010567511,"sku":"BDL-TORQUE-TRIO","price":186.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_28ed2fb3-8ba9-4f6f-aa0b-fc1183dfab05.jpg?v=1792801488"},{"product_id":"teng-tools-metric-socket-sets-in-foam-1-4-3-8-and-1-2-inch-drive-bdl-socket-trio","title":"Teng Tools Metric Socket Set Trio - 1\/4, 3\/8 and 1\/2 Inch Drive Socket Wrench Sets in FOAM2 Foam Trays with 72-Tooth Ratchets - BDL-SOCKET-TRIO","description":"\u003cp\u003eA complete metric line-up across the three drive sizes, each set in its own foam tray so a missing socket shows at a glance. The 1\/4 inch set handles small fasteners, the 3\/8 inch set the everyday middle range and the 1\/2 inch set the bigger bolts. This bundle puts three standard Teng Tools sets into one order for a workshop, a service vehicle or a tool crib that needs every drive size covered.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTED1489: 1\/4 inch drive, 89 pieces. Regular and deep 6-point metric sockets, bit sockets, 25 mm bits, 72-tooth ratchet, FOAM2 tray.\u003c\/li\u003e\n\u003cli\u003eTED3836: 3\/8 inch drive, 36 pieces. 6-point metric sockets from 8 to 22 mm, TX and hex bit sockets, 72-tooth ratchet, FOAM2 tray.\u003c\/li\u003e\n\u003cli\u003eTED1227: 1\/2 inch drive, 27 pieces. Regular and deep 12-point metric sockets, 72-tooth ratchet, FOAM2 tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery ratchet in the bundle has 72 teeth and an IP5X-rated mechanism protected from dust and debris. The 1\/2 inch set includes a 3\/8 to 1\/2 step up adaptor and the 3\/8 inch set a 1\/2 to 3\/8 reducing adaptor, so attachments move between the two larger drives when the job calls for it.\u003c\/p\u003e\u003cp\u003eThe FOAM2 trays give each socket, bit and handle its own cut-out. A technician sees what is missing before the drawer closes, and a crib attendant can check a returned set without counting pieces.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4 INCH DRIVE, 89 PIECES (TED1489) — The small-fastener set. This 1\/4 drive socket set holds regular and deep 6-point metric sockets from 4 to 13 mm, TX, Phillips, Pozidriv and flat bit sockets, a wide selection of 25 mm hex bits, two extension bars, a universal joint and a spinner handle. Sockets are chrome vanadium steel to DIN 3124 and ISO 2725. Weight 1600 g (3.5 lb).\u003c\/li\u003e\n\u003cli\u003e3\/8 INCH DRIVE, 36 PIECES (TED3836) — The everyday middle range. A 3\/8 drive socket set with 6-point metric sockets from 8 to 22 mm, TX bit sockets from TX10 to TX50 and hex bit sockets from 3 to 12 mm, plus a wobble extension bar, a universal joint, a 1\/2 to 3\/8 reducing adaptor and a rotating spinner handle. Weight 2379 g (5.2 lb).\u003c\/li\u003e\n\u003cli\u003e1\/2 INCH DRIVE, 27 PIECES (TED1227) — The bigger bolts. A 12 point socket set in 1\/2 drive with regular metric sockets from 10 to 24 mm and deep sockets from 10 to 19 mm, two extension bars, a universal joint and a 3\/8 to 1\/2 step up adaptor, all laid out in its own FOAM2 tray. Weight 3505 g (7.7 lb).\u003c\/li\u003e\n\u003cli\u003eRATCHET IN EVERY TRAY — Each of the three trays carries its own 72-tooth ratchet, and the mechanism is IP5X-rated to keep out dust and debris. That makes this a ratchet and socket set at every drive size: no borrowing a handle from the next drawer, and the 1\/4, 3\/8 and 1\/2 inch tools can be in use on the same job at the same time.\u003c\/li\u003e\n\u003cli\u003eFOAM TRAYS FOR TOOL CONTROL — Every piece has a cut-out in a FOAM2 module, so a missing socket shows at a glance before the drawer closes. For a crib, a service van or a mechanic socket set handed between shifts, an empty slot is the check. Three separate Teng Tools products, shipped together from Fort Worth, Texas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-SOCKET-TRIO\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565010862423,"sku":"BDL-SOCKET-TRIO","price":341.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_3b026c3f-cdbb-44a9-aadb-cbdfaf2a6a1b.jpg?v=1792801500"},{"product_id":"teng-tools-t-handle-hex-and-torx-key-sets-in-foam-bdl-thandle","title":"Teng Tools T-Handle Hex Key Set and Torx Key Set - 7 Metric Ball Point Hex Keys 2.5-8 mm and 7 TX Keys TX10-TX40 in FOAM2 Trays - BDL-THANDLE","description":"\u003cp\u003eT-handle hex and Torx keys are the two drive types most machinery, bikes and modern vehicles mix together. This Teng Tools bundle puts both in one order, each set in a FOAM2 foam tray, side by side in a drawer.\u003c\/p\u003e\u003cp\u003eWhat is in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTEDHEX7: 7-piece metric T-handle ball point hex keys in 2.5, 3, 4, 5, 6, 7 and 8 mm, in a FOAM2 tray.\u003c\/li\u003e\n\u003cli\u003eTEDTX7: 7-piece T-handle TX keys in TX10, TX15, TX20, TX25, TX27, TX30 and TX40, in a FOAM2 tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhy they go together: a job rarely stays with one drive type, and the T-handle gives the same reach and grip on hex and Torx screws alike. Buying the two as a pair means matching handles, matching trays and one place to look for either key.\u003c\/p\u003e\u003cp\u003eThe hex keys have a ball point on the long end for access at angles of up to 25 degrees and a regular hex end on the short arm for higher torque, and are manufactured to DIN ISO 2936. The TX keys carry a TPX end on the long arm for tamper proof TPX fastenings and a regular TX end on the short arm. Every key has an ergonomic TPR anti-slip grip and is held in three-colour pre-cut high-density EVA foam. For anyone who calls them allen keys, the hex tray is a metric T-handle allen key kit, and the TX tray is its Torx partner.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTWO DRIVE TYPES, ONE DRAWER — Hex and Torx are the two drive types most machinery, bikes and modern vehicles mix together. This bundle puts the TEDHEX7 7-piece metric T-handle ball point hex keys and the TEDTX7 7-piece T-handle TX keys into one order. Each set sits in its own FOAM2 foam tray, so the two trays lie side by side in a drawer and the right key for either drive is always in the same place.\u003c\/li\u003e\n\u003cli\u003eMETRIC BALL POINT HEX KEYS, 2.5 TO 8 MM — Seven sizes: 2.5, 3, 4, 5, 6, 7 and 8 mm. On every T-handle hex key wrench in the tray, the ball point on the long end gives access at angles of up to 25 degrees for fasteners that are hard to reach square-on, while the regular hex end on the short arm lets you apply higher torque without damaging the fastener. Manufactured to DIN ISO 2936.\u003c\/li\u003e\n\u003cli\u003eSTAR KEY SET, TX10 TO TX40 — Seven T-handle TX keys in TX10, TX15, TX20, TX25, TX27, TX30 and TX40. The long end carries a TPX tip for use with tamper proof TPX fastenings, and the short arm has a regular TX end for higher torque. With both ends on every key, one tray covers the standard and the tamper proof versions of the common TX sizes.\u003c\/li\u003e\n\u003cli\u003eTPR GRIPS AND PRE-CUT FOAM — Both sets have ergonomic thermoplastic rubber (TPR) anti-slip grips for comfortable turning. Every key is held in three-colour pre-cut high-density EVA foam in a FOAM2 module, 265 x 282 mm (10.4 x 11.1 inch) and 50 mm (2 inch) high, so each key has its own pocket and the trays drop straight into a tool chest drawer.\u003c\/li\u003e\n\u003cli\u003eWEIGHTS AND SUPPLY — The hex key tray weighs 1029 g (2.3 lb) and the TX key tray 892 g (2 lb). Both are standard Teng Tools catalogue products in the same FOAM2 module size, so they line up with other Teng Tools foam trays. Shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-THANDLE\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565011059031,"sku":"BDL-THANDLE","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_d50f78c2-201d-4e27-89a3-f9c3cd740681.jpg?v=1792801510"},{"product_id":"teng-tools-pliers-set-and-screwdriver-set-bdl-plier-driver","title":"Teng Tools Pliers Set and Screwdriver Set - 4 Pliers with TPR Grips and 7 Flat, Phillips and Pozi Screwdrivers in TT1 Trays - BDL-PLIER-DRIVER","description":"\u003cp\u003eThe two hand tool sets every toolbox starts with, in one order: four pliers (side cutting, combination, long nose and water pump) and seven flat, Phillips and Pozi screwdrivers, each set in its own modular tray.\u003c\/p\u003e\u003cp\u003eWhat is in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTT440-T: 4-piece plier tray with TPR bi-material grips. Side cutting plier 160 mm, heavy duty combination plier 190 mm, long nose plier 205 mm and water pump plier 250 mm.\u003c\/li\u003e\n\u003cli\u003eTT917N: 7-piece mixed screwdrivers in a TT1 modular tool tray. Flat 0.5x3.0, 1.0x5.5 and 1.2x6.5; Phillips PH0, PH1 and PH2; Pozidriv PZ2.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhy they go together: most jobs that need a screwdriver also need something cut, gripped or held, and these are the pliers and drivers reached for most often. Buying them as a pair means both trays arrive at the same time, matched in size, and ready to sit next to each other in a TT1 drawer layout.\u003c\/p\u003e\u003cp\u003eOn the pliers, thermoplastic rubber handles give an anti-slip grip, and the set is manufactured to DIN and ISO standards. On the screwdrivers, the TT-MV PLUS alloy steel blades are made for strength and flexibility, the handle is moulded around the blade for higher torque capacity, and a hanging hole lets a driver work as a T handle or be tethered with a fall protection wire.\u003c\/p\u003e\u003cp\u003eThis pairing makes a sound pliers kit and driver selection for a new apprentice toolbox, a maintenance cart or a second van.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTHE TWO SETS A TOOLBOX STARTS WITH — This bundle puts the TT440-T 4-piece plier tray and the TT917N 7-piece mixed screwdriver tray into one order. Between them they cover the most commonly used pliers and the most commonly used flat, Phillips and Pozidriv screwdriver sizes. Both are standard Teng Tools products organised in TT1 module trays, so they sit side by side in a drawer or tool chest.\u003c\/li\u003e\n\u003cli\u003ePLIER SET WITH TPR GRIPS — The TT440-T holds a 160 mm (6.3 inch) side cutting plier, a 190 mm (7.5 inch) heavy duty combination plier, a 205 mm (8.1 inch) long nose plier and a 250 mm (9.8 inch) water pump plier. Thermoplastic rubber (TPR) anti-slip handles give a secure, comfortable grip, and the set is manufactured to DIN and ISO standards for daily industrial use. Tray and pliers weigh 1190 g (2.6 lb).\u003c\/li\u003e\n\u003cli\u003eSCREWDRIVER KIT IN FLAT, PH AND PZ — The TT917N gives three slotted drivers in 0.5x3.0, 1.0x5.5 and 1.2x6.5, three Phillips in PH0, PH1 and PH2, and a PZ2 Pozidriv. Blades are TT-MV PLUS alloy steel for strength and material flexibility, and each bi-material handle is moulded around its blade to give a higher torque capacity. Three tip styles in one tray means the right driver for slotted, cross head and Pozi screws is always to hand.\u003c\/li\u003e\n\u003cli\u003eHANDLES BUILT FOR REAL WORK — Every screwdriver handle is ergonomically designed in two materials for easier use under higher torque, and carries a hanging hole so the driver can be used as a T handle or tethered with a fall protection wire when working at height. The seven drivers and their tray weigh 728 g (1.6 lb), light enough to carry to the job in one hand.\u003c\/li\u003e\n\u003cli\u003eMODULAR TRAYS, ONE ORDER — Both trays are TT1 module size, 265 x 142 mm (10.4 x 5.6 inch) and 50 mm (2 inch) high, made to integrate with Teng Tools storage so the pair drops into a tool chest drawer. Both items are shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-PLIER-DRIVER\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565011419479,"sku":"BDL-PLIER-DRIVER","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_f41757ef-caca-42db-b34a-f45e02ffe423.jpg?v=1792801520"},{"product_id":"teng-tools-sae-socket-sets-1-4-3-8-and-1-2-inch-drive-bdl-sae-sockets","title":"Teng Tools SAE Socket Set Bundle - 1\/2 Inch Drive 12 Point and 1\/4 and 3\/8 Inch Drive 6 Point Regular and Deep Sockets in TT1 Trays - BDL-SAE-SOCKETS","description":"\u003cp\u003eSAE sockets across the three drive sizes: a 1\/2 inch drive set for the bigger sizes and a 1\/4 and 3\/8 inch drive set with regular and deep sockets, both in modular trays. Together they give a workshop that works on inch-sized fasteners one tray system from the smallest 1\/4 inch drive socket up to the 1\/2 inch drive range.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTT1215AF: 15-piece 1\/2 inch drive, 12-point SAE sockets, regular depth, 3\/8 inch to 1 1\/4 inch, chrome vanadium, TT1 tray.\u003c\/li\u003e\n\u003cli\u003eTTAF32: 32-piece 1\/4 and 3\/8 inch drive, 6-point SAE sockets, regular and deep, 3\/16 inch to 3\/4 inch, chrome vanadium with satin finish, TT1 tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBoth sets are made to DIN and ISO 2725 socket standards. The 1\/2 inch drive sockets are 12-point and the 1\/4 and 3\/8 inch drive sockets are 6-point. Sockets only: no ratchet, extension or adaptor is included, so they pair with the square drive handles already in the drawer.\u003c\/p\u003e\u003cp\u003eBoth trays are Teng Tools TT-Series module size 1 (TT1). Every socket has its own slot, which makes a missing size obvious at the end of a shift and keeps regular and deep sockets from mixing in the drawer.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/2 INCH DRIVE, 15 PIECES (TT1215AF) — The bigger sizes. A 12 point socket set in 1\/2 drive with 15 regular-depth SAE sockets from 3\/8 inch to 1 1\/4 inch, made from chrome vanadium steel to DIN 3124 and ISO 2725 and organized in a TT1 tool tray module so every socket has its own place. Weight 1720 g (3.8 lb).\u003c\/li\u003e\n\u003cli\u003e1\/4 AND 3\/8 INCH DRIVE, 32 PIECES (TTAF32) — The smaller sizes. Regular and deep 6-point SAE sockets covering both the 1\/4 drive socket set and the 3\/8 drive socket set sizes, from 3\/16 inch to 3\/4 inch, in one TT1 tray. Chrome vanadium with a satin finish, made to DIN 3120\/3124 and ISO 2725. Weight 1422 g (3.1 lb).\u003c\/li\u003e\n\u003cli\u003eINCH SIZES ON EVERY DRIVE — A standard socket set line-up for imperial fasteners, to run alongside a metric set or on its own for equipment built to inch sizes. The deep sockets in the 1\/4 and 3\/8 inch drive set reach nuts on long studs, and the 1\/2 inch drive set keeps to regular, shallow sockets for the larger sizes.\u003c\/li\u003e\n\u003cli\u003eTRAYS, NOT LOOSE SOCKETS — Both sets come in Teng Tools TT1 tool tray modules (TT-Series, module size 1). Each socket sits in its own slot, so the set goes into a drawer ready to use and an empty slot shows what has not come back. No ratchet is included: the sockets fit the 1\/4, 3\/8 and 1\/2 inch square drive handles you already run.\u003c\/li\u003e\n\u003cli\u003eTWO SETS, ONE ORDER — This bundle is two separate Teng Tools products, TT1215AF and TTAF32, sold together so a shop, fleet or tool crib covers SAE sizes across three drives with a single order. Shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-SAE-SOCKETS\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565011616087,"sku":"BDL-SAE-SOCKETS","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_0603f122-0244-4a29-94df-9f788635bb35.jpg?v=1792801530"},{"product_id":"teng-tools-electrician-1000v-set-insulated-screwdrivers-pliers-and-3-8-inch-drive-sockets-bdl-elec-pro","title":"Teng Tools 1000V Insulated Screwdriver Set, Pliers and 3\/8 inch Drive Socket Set - Electrician Tool Kit Bundle - BDL-ELEC-PRO","description":"\u003cp\u003eFor electricians working on or near live equipment, this bundle puts two Teng Tools insulated sets in one order. The first covers screwdrivers and pliers in a carry case; the second adds a 1000V insulated 3\/8 inch drive socket set for the panel and busbar fasteners a screwdriver cannot reach. Every tool in both sets is approved for live working up to 1000 volts and manufactured to IEC 60900.\u003c\/p\u003e\u003cp\u003eWhat is in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTV18N: MECCA PRO insulated screwdriver and plier set, 18 pieces, in a hard-wearing carrying case. Five pliers (two side cutting, one combination, one long nose, one wire stripping) and thirteen screwdrivers (five slotted, four Phillips PH0 to PH3, four Pozidriv PZ0 to PZ3).\u003c\/li\u003e\n\u003cli\u003eTEFSKV19: 1000 volt insulated socket and pliers set, 19 pieces, in a FOAM3 EVA foam inlay. Four pliers, a 72 tooth 3\/8 inch drive ratchet, two extension bars and twelve 6 point metric sockets from 8 to 20 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhy they go together: the case set handles terminal screws, conductor cutting and stripping, while the foam set handles the nuts and bolts on the same job. An insulated tool set for each kind of fastener means fewer reasons to reach for an uninsulated spare.\u003c\/p\u003e\u003cp\u003eThe screwdrivers carry two-colour protective insulation that shows damage clearly. The sockets are insulated in the same two colours. The pliers have TPR grips for a secure hold. The foam set is designed to fit exactly in Teng Tools service cases, so it can live in a drawer or travel in a case.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTWO 1000V SETS FOR LIVE ELECTRICAL WORK — This bundle puts two standard Teng Tools insulated sets into one order for electricians working on or near live equipment: the TV18N 18-piece screwdriver and plier set in a MECCA PRO carrying case, and the TEFSKV19 19-piece 3\/8 inch drive socket and plier set in EVA foam. Both are approved for live working up to 1000 volts, VDE approved and manufactured to IEC 60900.\u003c\/li\u003e\n\u003cli\u003eELECTRICAL SCREWDRIVER SET IN THREE TIP STYLES — The TV18N case holds thirteen insulated drivers: five slotted in 0.4x2.5, 0.5x3.0, 0.8x4.0, 1.0x5.5 and 1.2x6.5, four Phillips PH0 to PH3 and four Pozidriv PZ0 to PZ3. On every slotted and Phillips screwdriver, two-colour integrated insulation shows at a glance if the outer layer is damaged, and bi-material handles give a secure, comfortable grip on terminal screws.\u003c\/li\u003e\n\u003cli\u003eELECTRICAL PLIERS FOR CUTTING, GRIPPING AND STRIPPING — The case set carries a 160 mm (6.3 inch) and a 205 mm (8.1 inch) side cutting plier, a 200 mm (7.9 inch) combination plier, a 215 mm (8.5 inch) long nose plier and a wire stripping plier. The foam set adds a second side cutter, a 185 mm (7.3 inch) combination plier, a 210 mm (8.3 inch) bent long nose plier and another wire stripper, all with TPR grips.\u003c\/li\u003e\n\u003cli\u003e3\/8 INCH DRIVE INSULATED SOCKET SET — The TEFSKV19 brings twelve 6 point insulated sockets in 8, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19 and 20 mm, a 72 tooth insulated ratchet and two insulated extension bars of 75 mm (3 inch) and 150 mm (5.9 inch) for panel and busbar fasteners. Each tool sits in three-colour pre-cut high-density EVA foam in a FOAM3 module that fits Teng Tools service cases.\u003c\/li\u003e\n\u003cli\u003eCASE AND TRAY IN ONE ORDER — The MECCA PRO case is hard wearing, with a secure lock system so the lid closes correctly and a laid-out interior that shows where every tool belongs. The case set weighs 6140 g (13.5 lb) and the foam set 1896 g (4.2 lb). Both are regular catalogue products, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-ELEC-PRO\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565011910999,"sku":"BDL-ELEC-PRO","price":455.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_eab51b6d-492c-4ed5-b665-6cdc82ec0ed4.jpg?v=1792801549"},{"product_id":"teng-tools-electrician-starter-set-1000v-pliers-vde-screwdrivers-and-insulated-torque-screwdriver-bdl-elec-start","title":"Teng Tools Electrician Starter Set - 1000V Insulated Pliers, VDE Screwdrivers, Insulated Torque Screwdriver 1-5 Nm and VDE Blade Set - BDL-ELEC-START","description":"\u003cp\u003eAn electrician needs insulated pliers and insulated screwdrivers, and terminal screws are tightened to a specified torque. This Teng Tools starter bundle covers all of it in one order: a 1000V plier set, a 1000V VDE screwdriver set, an insulated adjustable torque driver and the interchangeable VDE blade set the torque driver takes. Every item is approved for live working up to 1000 volts and manufactured to IEC 60900.\u003c\/p\u003e\u003cp\u003eWhat is in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTTV440: 4-piece 1000V insulated pliers in a TT1 tray. Side cutting 160 mm, combination 185 mm, long nose 215 mm and a wire stripping plier, with TPR grips.\u003c\/li\u003e\n\u003cli\u003eTTDV910N: 10-piece 1000V VDE electrical screwdrivers in a TT2 tray. Four slotted, three Phillips (PH0 to PH2) and three Pozidriv (PZ0 to PZ2), with bi-material handles.\u003c\/li\u003e\n\u003cli\u003e1492TVSD: 1\/4 inch drive 1000 volt insulated torque driver, adjustable from 1 to 5 Nm.\u003c\/li\u003e\n\u003cli\u003eMDV909N: 9-piece 1000V insulated interchangeable blade set in a Teng Tools wallet. Flat blades 3, 4, 5.5 and 6.5 mm, Phillips PH1 and PH2, Pozidriv PZ1 and PZ2, and an insulated handle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhy these go together: the pliers cut, grip and strip the conductor, the screwdrivers handle general terminal work, and the torque driver, fitted with a blade from the MDV909N wallet, lands the final setting where a specified torque applies. Where torque is specified in inch pounds, the 1 to 5 Nm range equals 8.9 to 44.3 inch pounds. A slipper mechanism stops the driver applying torque beyond the set value, and a push lock keeps the setting from drifting between jobs.\u003c\/p\u003e\u003cp\u003eThe two trays are TT module sizes 1 and 2, so they sit side by side in a Teng Tools drawer. The torque driver takes Teng Tools VDE interchangeable blades, and the MDV909N wallet in this bundle holds eight of them, so it is ready for a terminal screw out of the box.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFOUR 1000V PRODUCTS FOR TERMINAL WORK: An electrician needs insulated pliers and screwdrivers, and terminal screws are tightened to a specified torque. This bundle puts the TTV440 4-piece plier set, the TTDV910N 10-piece VDE screwdriver set, the 1492TVSD insulated adjustable torque driver and the MDV909N interchangeable blade set it takes in one order. Every item is approved for live working up to 1000 volts and manufactured to IEC 60900.\u003c\/li\u003e\n\u003cli\u003eELECTRICAL PLIERS FOR CUT, GRIP AND STRIP: The TTV440 holds a 160 mm (6.3 inch) side cutting plier, a 185 mm (7.3 inch) combination plier, a 215 mm (8.5 inch) long nose plier and a wire stripping plier. Each is individually VDE tested for 1000 V live working, made to DIN 5745, DIN 5746 and DIN 5749, with TPR grips for a secure, comfortable hold. The set sits in a TT1 module tray and weighs 987 g (2.2 lb).\u003c\/li\u003e\n\u003cli\u003e1000V INSULATED SCREWDRIVER SET, FLAT, PH AND PZ: The TTDV910N gives four slotted drivers in 0.4x2.5, 0.5x3.0, 0.8x4.0 and 1.0x5.5, three Phillips PH0, PH1 and PH2 and three Pozidriv PZ0, PZ1 and PZ2. Blades are TT-MV PLUS alloy steel with hardened tips, and two-colour integrated insulation shows clearly if it is damaged. Made to DIN ISO 2380 and DIN ISO 8764-1, in a TT2 module tray.\u003c\/li\u003e\n\u003cli\u003eSET TORQUE, THEN STOP: The 1492TVSD is a 1\/4 inch drive insulated torque driver covering 1 to 5 Nm, which is 8.9 to 44.3 inch pounds. A slipper mechanism applies no torque beyond the set value, a push lock holds the setting, and the window scale reads in Nm. Accurate to plus or minus 6%, it conforms to ISO 6789 and is individually tested and certified at manufacture with its own certification number.\u003c\/li\u003e\n\u003cli\u003eSIZES AND SUPPLY: The torque driver is 213 mm (8.4 inch) long with an 82 mm (3.2 inch) shaft and weighs 222 g (7.8 oz). It takes Teng Tools VDE interchangeable blades, and the MDV909N wallet supplies eight of them: flat 3, 4, 5.5 and 6.5 mm, PH1, PH2, PZ1 and PZ2, with an insulated handle. All four items are standard Teng Tools catalogue products, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-ELEC-START\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565012140375,"sku":"BDL-ELEC-START","price":222.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_b2134906-e114-4c8b-bed6-4ca8dfa81a96.jpg?v=1794227281"},{"product_id":"teng-tools-wheel-nut-set-1-2-inch-torque-wrench-and-wheel-tool-set-bdl-wheel-car","title":"Teng Tools Wheel Nut Set, 1\/2 Inch Drive Torque Wrench and Wheel Tool Set with Breaker Bar, Extension, 17, 19, 21 mm Lug Nut Sockets - BDL-WHEEL-CAR","description":"\u003cp\u003eEverything for taking wheels off and putting them back on correctly, in one Teng Tools bundle. The wheel tool set breaks the nuts loose with its breaker bar, extension and wheel nut sockets, and the torque wrench tightens them back to the vehicle spec.\u003c\/p\u003e\u003cp\u003eThe TEXW05 wheel socket set holds a 1\/2 inch breaker bar, 450 mm (17.7 inch) long and made to DIN 3122, a 125 mm (4.9 inch) 1\/2 inch drive impact extension bar for recessed rims, and three impact wheel nut sockets in 17, 19 and 21 mm. The sockets are long reach with protective nylon sleeves to avoid damage to wheels. The tools are held in a three colour, pre-cut, high-density EVA foam inlay, module size X4 (FOAMX4), so a missing piece shows at a glance.\u003c\/p\u003e\u003cp\u003eThe 1292UAG-EP is the torque wrench 1\/2 drive half of the bundle. It is designed for applying a specific, user-set torque when tightening fasteners, so each wheel nut goes back to the figure in the vehicle handbook rather than by feel.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/2 Inch Drive Torque Wrench (1292UAG-EP), quantity 1\u003c\/li\u003e\n\u003cli\u003e5 Piece 1\/2 Inch Wheel Tool Set, Breaker Bar, Impact Extension and Sockets in FOAMX4 Foam Tray, 17 to 21 mm (TEXW05), quantity 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBREAKER BAR TO BREAK WHEEL NUTS LOOSE — The TEXW05 wheel tool set starts the job with a 1\/2 inch drive breaker bar, 450 mm (17.7 inch) long and made to DIN 3122, for shifting stubborn wheel nuts. A short 125 mm (4.9 inch) impact extension bar reaches into recessed wheel rims, so the socket seats fully on the nut before you put your weight on the bar.\u003c\/li\u003e\n\u003cli\u003eLUG NUT SOCKETS IN 17, 19 AND 21 MM — Three 1\/2 inch drive impact wheel nut sockets cover the 17, 19 and 21 mm sizes. They are long reach sockets with protective nylon sleeves to avoid damage to wheels, which matters on painted and alloy rims, where the socket sits close to the wheel finish while each nut turns.\u003c\/li\u003e\n\u003cli\u003e1\/2 INCH DRIVE TORQUE WRENCH TO REFIT — Once the wheel is back on, the 1292UAG-EP tightens the nuts back to the vehicle spec. Used as a lug nut torque wrench, it is designed for applying a specific, user-set torque when tightening fasteners, the step that a breaker bar or an impact gun cannot do for you when the wheel has to come off cleanly next time.\u003c\/li\u003e\n\u003cli\u003eWHAT IS IN THE BOX — Two separate Teng Tools products shipped together: a 1\/2 Inch Drive Torque Wrench (1292UAG-EP) and a 5 Piece 1\/2 Inch Wheel Tool Set (TEXW05) holding the breaker bar, impact extension and three wheel nut sockets in a FOAMX4 tray. The wheel tool set weighs 2205 g (4.9 lb), and every piece sits in three colour pre-cut high-density EVA foam.\u003c\/li\u003e\n\u003cli\u003eTIRE CHANGING TOOLS THAT SHIP TOGETHER — Everything for taking wheels off and putting them back on correctly arrives as one order from Fort Worth, Texas: the tools to break the nuts loose, and the torque wrench to finish the job to spec. Each is a standard Teng Tools product, the same item listed on its own under its part number. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-WHEEL-CAR\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565012402519,"sku":"BDL-WHEEL-CAR","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_e6cb72a7-5dbc-42fb-83fe-67b329747232.jpg?v=1792801560"},{"product_id":"teng-tools-heavy-wheel-nut-set-25-to-250-ft-lb-torque-wrench-600-mm-breaker-bar-and-impact-sockets-bdl-wheel-truck","title":"Teng Tools Light Truck and Trailer Wheel Nut Set, 25 to 250 ft-lb Torque Wrench, 600 mm Breaker Bar, 16 Impact Sockets 1\/2 Inch - BDL-WHEEL-TRUCK","description":"\u003cp\u003eFor light trucks, trailers and heavier wheels, this Teng Tools bundle covers the whole wheel job in three parts: a 600 mm (23.6 inch) breaker bar to crack tight nuts, a 1\/2 inch drive set of impact sockets in regular and deep, and a 25 to 250 ft-lb torque wrench to tighten them back to spec.\u003c\/p\u003e\u003cp\u003eThe 1201A breaker bar has a 1\/2 inch square drive and is built to DIN 3122, with a ball detent retainer for a secure socket connection during high-torque applications and a bi-material handle for grip and control.\u003c\/p\u003e\u003cp\u003eThe TT9116N holds 16 metric 6-point impact sockets, 1\/2 inch drive, eight regular and eight deep, in 13, 15, 16, 17, 18, 19, 22 and 24 mm. They are manufactured to ASME B107.33M from chrome molybdenum steel for daily heavy-duty use with electric and air powered impact tools, and they sit in a TT-Series Module Size 1 (TT1) tray.\u003c\/p\u003e\u003cp\u003eThe 1292UAG-E4 is the torque wrench 1\/2 drive part of the kit, adjustable from 25 to 250 ft-lb for applying a specific torque to a nut or bolt.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/2 Inch Drive Torque Wrench 25 to 250 ft-lb (1292UAG-E4), quantity 1\u003c\/li\u003e\n\u003cli\u003e1\/2 Drive Breaker Bar 600 mm DIN 3122 (1201A), quantity 1\u003c\/li\u003e\n\u003cli\u003e16 Piece 1\/2 Inch Drive 6 Point Metric Regular and Deep ANSI Impact Sockets, TT1 tray (TT9116N), quantity 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBREAKER BAR 1\/2 INCH DRIVE, 600 MM: The 1201A is a 600 mm (23.6 inch) 1\/2 inch square drive breaker bar made to DIN 3122, for cracking tight wheel nuts on light trucks, trailers and heavier wheels. A ball detent retainer keeps the socket secure during high-torque pulls, and the bi-material handle gives a firm grip and control. The bar weighs 1186 g (2.6 lb).\u003c\/li\u003e\n\u003cli\u003e16 METRIC IMPACT SOCKETS, REGULAR AND DEEP: The TT9116N holds eight regular and eight deep 1\/2 inch drive 6-point metric impact sockets in 13, 15, 16, 17, 18, 19, 22 and 24 mm, made to ANSI and ASME B107.33M from chrome molybdenum steel. Each socket has ball detent retention and is designed for electric and air powered impact tools in professional and industrial use.\u003c\/li\u003e\n\u003cli\u003e250 FT-LB TORQUE WRENCH TO REFIT: The 1292UAG-E4 is a 25 to 250 ft-lb torque wrench with a 1\/2 inch square drive, for controlled tightening of wheel nuts and other fasteners to a specified value. After the breaker bar and impact sockets do the removal, this is the wrench that puts each nut back to the figure on the spec sheet rather than by feel.\u003c\/li\u003e\n\u003cli\u003eWHAT IS IN THE BOX: Three separate Teng Tools products shipped together: a 1\/2 Inch Drive Torque Wrench, 25 to 250 ft-lb (1292UAG-E4), a 1\/2 Inch Drive Breaker Bar, 600 mm, DIN 3122 (1201A) and 16 Piece 1\/2 Inch Drive Metric Regular and Deep ANSI Impact Sockets in a TT1 tray (TT9116N). The sockets and tray weigh 3020 g (6.7 lb).\u003c\/li\u003e\n\u003cli\u003eFOR LIGHT TRUCKS, TRAILERS AND HEAVIER WHEELS: Used together as a lug nut wrench kit for heavier wheels, the bar cracks tight nuts, the deep and regular sockets run them off and on, and the torque wrench finishes the job to spec. All three ship together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects. Each is the same item listed on its own.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHub-piloted heavy truck wheels commonly need larger sockets and more torque than this kit reaches. For those, see the \u003ca href=\"\/es\/products\/1-3-torque-multiplier-kit-5-piece\"\u003e1:3 Torque Multiplier Kit\u003c\/a\u003e, which multiplies the same 25 to 250 ft-lb torque wrench through 1 inch drive sockets.\u003c\/p\u003e\u003cp\u003ePart number: BDL-WHEEL-TRUCK\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565012533591,"sku":"BDL-WHEEL-TRUCK","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_d847c52f-99e0-46a7-b5d3-ba6f3ba393b8.jpg?v=1792801572"},{"product_id":"teng-tools-engine-service-set-3-8-inch-torque-wrench-and-oil-service-set-bdl-engine","title":"Teng Tools Engine Service Set: 16 Piece Oil Change Kit, 3\/8 Inch Drive 15 to 80 ft-lb Torque Wrench, Ratchet and Step Up Adaptor - BDL-ENGINE","description":"\u003cp\u003eFor routine engine service, this Teng Tools bundle pairs an oil service set with a torque wrench and a ratchet. The oil service set covers drain plugs, filters and spark plugs, and the 3\/8 inch drive 15 to 80 ft-lb torque wrench tightens drain plugs and spark plugs to spec instead of by feel. The 3800FRP 3\/8 inch drive ratchet takes them out first, and the M380036-C step up adaptor lets the same ratchet turn the 1\/2 inch drive strap filter wrench.\u003c\/p\u003e\u003cp\u003eThe TTOS16 is an oil changing kit with the tools normally required for an oil service, organised in a tool tray module size 1 (TT1). It contains a strap-type oil filter wrench, six double-ended drain plug keys (5\/16 x 3\/8, 8 x 10, 8 x 3\/8, 11, 13 and 17 x 1\/2), two 6-point spark plug sockets in 16 and 21 mm, a 21 mm 6-point metric socket, a 75 mm (3 inch) extension bar, a 255 mm (10 inch) wobble extension bar, a 1\/2 inch female to 3\/8 inch male reducing adaptor, a metric feeler gauge set with 20 blades from 0.05 to 1.0 mm, and a telescopic 3 in 1 inspection tool with mirror and magnet.\u003c\/p\u003e\u003cp\u003eThe 3892UAG-E3 has a 3\/8 inch square drive and an adjustable setting from 15 to 80 ft-lb, so it runs straight onto the spark plug sockets in the tray.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/8 Inch Drive Torque Wrench, 15 to 80 ft-lb (3892UAG-E3), quantity 1\u003c\/li\u003e\n\u003cli\u003e16 Piece 3\/8 Drive Oil Service Set, Drain Plug Keys, Filter Wrench, Spark Plug Sockets, Feeler Gauge (TTOS16), quantity 1\u003c\/li\u003e\n\u003cli\u003e3\/8 Inch Drive Ratchet, 45 Teeth (3800FRP), quantity 1\u003c\/li\u003e\n\u003cli\u003e3\/8 Inch Female to 1\/2 Inch Male Step Up Adaptor (M380036-C), quantity 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOIL FILTER WRENCH AND DRAIN PLUG KEYS: The TTOS16 oil service set holds the tools normally required for an oil service on passenger vehicles. A strap-type oil filter wrench (1\/2 inch drive, 130 mm) grips the filter, and six double-ended drain plug keys in 5\/16 x 3\/8, 8 x 10, 8 x 3\/8, 11, 13 and 17 x 1\/2 cover the drain plugs the set is built for.\u003c\/li\u003e\n\u003cli\u003eSPARK PLUG SOCKETS AND FEELER GAUGE: Two 3\/8 inch drive 6-point spark plug sockets in 16 and 21 mm, a 21 mm 6-point metric socket, a 75 mm (3 inch) extension bar and a 255 mm (10 inch) wobble extension bar handle the plugs. A metric feeler gauge set with 20 blades from 0.05 to 1.0 mm measures clearances, and a 1\/2 inch female to 3\/8 inch male adaptor links the drives.\u003c\/li\u003e\n\u003cli\u003e3\/8 INCH DRIVE TORQUE WRENCH, 15 TO 80 FT-LB: The 3892UAG-E3 tightens drain plugs and spark plugs to spec instead of by feel. It has a 3\/8 inch square drive, the same drive as the spark plug sockets in the set, and an adjustable setting from 15 to 80 ft-lb, designed for tightening automotive and equipment fasteners to a precise value.\u003c\/li\u003e\n\u003cli\u003eWHAT IS IN THE BOX: Four Teng Tools products shipped together: a 3\/8 Inch Drive Torque Wrench, 15 to 80 ft-lb (3892UAG-E3), a 16 Piece 3\/8 Drive Oil Service Set (TTOS16) in a TT1 tool tray, a 3\/8 inch drive 45-tooth ratchet (3800FRP) and a 3\/8 inch female to 1\/2 inch male step up adaptor (M380036-C). The set also carries a telescopic 3 in 1 inspection tool with a mirror and magnetic pick up for dropped washers. The oil service set weighs 1789 g (3.9 lb).\u003c\/li\u003e\n\u003cli\u003eROUTINE ENGINE SERVICE, DONE TO SPEC: For routine engine service on passenger vehicles, the oil service set covers drain plugs, filters and spark plugs, and the torque wrench closes each job at the specified value. All four ship together from Fort Worth, Texas, and each is the same item listed on its own under its part number. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-ENGINE\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565012828503,"sku":"BDL-ENGINE","price":174.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_19102bf1-45f4-4f42-8d4c-55c3071ff11e.jpg?v=1794228167"},{"product_id":"teng-tools-seized-fastener-set-nut-splitters-and-extractors-breaker-bar-and-pry-bars-bdl-seized","title":"Teng Tools Seized Fastener Kit - Nut Splitter and Extractor Set, 1\/2 Inch Drive 600 mm Breaker Bar and 3 Piece Pry Bar Set - BDL-SEIZED","description":"\u003cp\u003eFor rusted, rounded and seized fasteners: nut splitters with screw and stud extractors, a 600 mm (23.6 inch) bar for leverage, and three pry bars for parts that have bonded in place. This bundle puts the three Teng Tools products a technician reaches for on a stuck job into a single order.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTTSN11: 11-piece extractor and splitter set. Two nut splitters, five spiral screw extractors and four 1\/2 inch drive reversible stud extractor sockets in a TT1 tool tray.\u003c\/li\u003e\n\u003cli\u003e1201A: 1\/2 inch square drive breaker bar, 600 mm (23.6 inch), built to DIN 3122, ball detent socket retainer, bi-material handle.\u003c\/li\u003e\n\u003cli\u003eTTXPB3A: three straight CrMo pry bars, 300 mm, 450 mm and 550 mm (11.8, 17.7 and 21.7 inch), in a TTX4 tool tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe tools work as a sequence. Start with the 1201A for leverage on a fastener that is merely tight. If the nut is rounded or rusted on, split it with one of the two nut splitters instead of cutting the bolt. If a screw or stud breaks, the spiral screw extractors and the 1\/2 inch drive stud extractor sockets remove what is left, and the stud extractors fit straight onto the same 1\/2 inch drive bar. Once the fasteners are out, the pry bars separate parts that have bonded together.\u003c\/p\u003e\u003cp\u003eThe extractor set and the pry bars each come in their own Teng Tools tool tray module, so the kit stays organized in a cabinet drawer between jobs.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNUT SPLITTERS AND EXTRACTORS (TTSN11) — An 11-piece set in a TT1 tool tray module for fasteners that will not come out the normal way: two nut splitters of different sizes to split jammed or stripped nuts without damaging the bolt thread, five spiral screw extractors for broken screws and bolts, and four 1\/2 inch drive reversible stud extractor sockets for studs. Weight 1520 g (3.4 lb).\u003c\/li\u003e\n\u003cli\u003e600 MM BAR, 1\/2 INCH DRIVE (1201A) — A long breaker bar built to DIN 3122 for heavily torqued or corroded fasteners: 600 mm (23.6 inch) of leverage, a 1\/2 inch square drive with a ball detent retainer that keeps the socket secure under high torque, and a bi-material handle for grip and control. It drives the four stud extractor sockets in this bundle directly. Weight 1186 g (2.6 lb).\u003c\/li\u003e\n\u003cli\u003eTHREE STRAIGHT BARS (TTXPB3A) — Three straight CrMo pry bars, heavy duty enough for parts that have bonded in place, in 300 mm (11.8 inch), 450 mm (17.7 inch) and 550 mm (21.7 inch) lengths. They are organized in a TTX4 tool tray module so the set stays together in a drawer and a missing bar is obvious. Weight 1816 g (4.0 lb).\u003c\/li\u003e\n\u003cli\u003eONE KIT FOR STUCK FASTENERS — Seized work rarely needs only one tool. The bar gives leverage first; when a nut is rounded or rusted solid, one of the two splitters cracks it off the thread; when a stud or screw breaks, the extractors take it out; and when the part itself will not move, the pry bars free it. Everything for the job arrives in one order instead of three separate searches.\u003c\/li\u003e\n\u003cli\u003eFOR SHOPS THAT FIGHT RUST — Built for maintenance shops, fleet and tire service, plant engineering and auto repair, where rusted, rounded and seized fasteners are routine. Three standard Teng Tools products, TTSN11, 1201A and TTXPB3A, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-SEIZED\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565012926807,"sku":"BDL-SEIZED","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_d70a3df4-e91d-40dd-9cba-597e0e1c9615.jpg?v=1792801592"},{"product_id":"teng-tools-plumber-set-two-pipe-wrenches-water-pump-plier-and-tube-cutter-bdl-plumber","title":"Teng Tools Plumber Set - 450 mm (17.7 inch) and 300 mm (11.8 inch) Aluminum Pipe Wrenches, Water Pump Plier, Copper Pipe Cutter - BDL-PLUMBER","description":"\u003cp\u003eTwo aluminum pipe wrenches of different lengths, 450 mm and 300 mm (17.7 and 11.8 inch), so one holds while the other turns, a 400 mm (15.7 inch) water pump plier for fittings and nuts, and a tube cutter for copper pipe up to 1-1\/4 inch. This bundle puts the four Teng Tools products a plumber or pipefitter reaches for first into one order.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePWC18: aluminum pipe wrench, 450 mm (17.7 inch), steel jaws, pipe capacity 60 mm (2-23\/64 inch).\u003c\/li\u003e\n\u003cli\u003ePWC12: aluminum pipe wrench, 300 mm (11.8 inch), steel jaws, pipe capacity 43 mm (1-11\/16 inch).\u003c\/li\u003e\n\u003cli\u003eMB416: groove joint water pump plier, 400 mm (15.7 inch), chrome vanadium, 90 mm (3.5 inch) maximum opening.\u003c\/li\u003e\n\u003cli\u003eTF30: copper and brass tube cutter, 3 to 32 mm (1\/8 to 1-1\/4 inch), built-in reamer, spare blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBoth wrenches use an aluminum body with steel jaws and an adjustment thread, so they set with one hand, and both carry a tethering facility for working at height. Using two different lengths is deliberate: the longer wrench gives leverage on the turning side, the shorter one holds in the space that is left.\u003c\/p\u003e\u003cp\u003eThe MB416 has serrated jaws and non-slip groove joints that can be adjusted under load, with a polished chrome vanadium head and a vinyl grip. The TF30 cuts with one wheel against two rollers for a straight edge, then the reamer in its frame cleans up the burr before the fitting goes on.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTWO WRENCHES, TWO LENGTHS (PWC18, PWC12) — A 450 mm (17.7 inch) and a 300 mm (11.8 inch) aluminum-bodied wrench, so on a joint one holds the fitting while the other turns the pipe. Each adjustable pipe wrench has steel jaws and an adjustment thread for one-hand operation, and a tethering facility for work at height. The light aluminum body keeps the weight down over a long day.\u003c\/li\u003e\n\u003cli\u003eCAPACITY BY SIZE — The 450 mm PWC18 takes pipe up to 60 mm (2-23\/64 inch) in diameter and weighs 1390 g (3.1 lb). The 300 mm PWC12 takes pipe up to 43 mm (1-11\/16 inch) and weighs 670 g (1.5 lb), the shorter of the two for tighter runs. Pipe wrenches for plumbing and industrial pipework, sized as a working pair rather than two of the same.\u003c\/li\u003e\n\u003cli\u003e400 MM WATER PUMP PLIERS (MB416) — Groove joint pliers for fittings and nuts: 400 mm (15.7 inch) overall, serrated jaws with a 90 mm (3.5 inch) maximum opening and a 60 mm jaw depth, non-slip groove joints that adjust under load, chrome vanadium with a polished head, and a vinyl grip. Weight 1135 g (2.5 lb).\u003c\/li\u003e\n\u003cli\u003eCOPPER TUBE CUTTER (TF30) — A copper tubing cutter for copper and brass pipe from 3 to 32 mm (1\/8 to 1-1\/4 inch). One cutting wheel and two rollers give a consistent, straight cut, a retractable reamer built into the frame deburrs the rough edge afterward, and a spare blade is included. Weight 268 g (9.5 oz).\u003c\/li\u003e\n\u003cli\u003eFOUR TOOLS, ONE PLUMBING JOB — Cut the copper with the TF30, deburr it with the built-in reamer, hold the run with one plumbing wrench while the other turns, and take fittings and nuts with the groove joint plier. Four standard Teng Tools products shipped together from Fort Worth, Texas, with a lifetime warranty against manufacturing defects on Teng Tools hand tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-PLUMBER\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565013188951,"sku":"BDL-PLUMBER","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_bf0229e3-68c5-4e7b-ad5f-226cec1342a0.jpg?v=1792801604"},{"product_id":"teng-tools-measuring-and-precision-set-digital-caliper-multimeter-gauges-and-hex-and-torx-keys-bdl-measure","title":"Teng Tools Measuring and Precision Set - Digital Caliper, Digital Multimeter, Feeler and Thread Gauges, Metric and SAE Hex Keys, TX Keys - BDL-MEASURE","description":"\u003cp\u003eFor machine setup and maintenance work, this Teng Tools bundle puts the instruments that measure and the keys that adjust in one order: a measuring tray with a caliper, multimeter, feeler gauge and thread gauge, plus metric and SAE ball point hex keys and TX keys.\u003c\/p\u003e\u003cp\u003eWhat is in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTTDCM: 4-piece measuring set in a TT2 tray. A 4 function caliper with digital display (0 to 150 mm), a digital multimeter, a feeler gauge with 20 blades from 0.05 to 1.0 mm, and a metric and UNC thread gauge (0.25 to 6.0 mm). Batteries included.\u003c\/li\u003e\n\u003cli\u003eTTHT28: 28-piece ball point hex and TX key set on a TT1 tray. Ten metric hex keys from 1.5 to 10 mm, nine SAE hex keys from 5\/64 to 3\/8 inch, and nine TX keys from TX8 to TX40, each group in a folding holder.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhy they go together: setup work moves between checking and adjusting. A gap is checked with the feeler gauge, a thread is identified with the thread gauge, a part is read with the caliper, and the hex and Torx screws that hold it are turned with the keys. With metric and SAE sizes in the same tray, this works as a complete allen wrench set for mixed machinery as well as a measuring kit.\u003c\/p\u003e\u003cp\u003eThe hex keys have ball point long arms for access at angles of up to 25 degrees and straight short ends for higher torque. The trays are TT module sizes 1 and 2, so they sit side by side in a Teng Tools drawer.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMEASURE, CHECK, THEN ADJUST — For machine setup and maintenance work, this bundle pairs the TTDCM 4-piece measuring tray with the TTHT28 28-piece hex and TX key tray. Measure a part, check a gap or a thread, then set the fastener that holds it, without leaving the bench for a second drawer. Both are standard Teng Tools sets in TT module trays: TT2 for the instruments and TT1 for the keys, ideal for mechanics and technicians.\u003c\/li\u003e\n\u003cli\u003eMEASURING TOOL SET, BATTERIES INCLUDED — The TTDCM tray holds a 4 function caliper with digital display, reading 0 to 150 mm (5.9 inch), a digital multimeter, a 20 blade feeler gauge from 0.05 to 1.0 mm (0.002 to 0.04 inch) with 100 mm (3.9 inch) blades, and a metric and UNC thread gauge covering 0.25 to 6.0 mm. Batteries are included, so the instruments are ready for diagnostic and measuring work out of the box.\u003c\/li\u003e\n\u003cli\u003eMETRIC AND SAE HEX KEY SET — The TTHT28 covers ten metric ball point hex keys in 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8 and 10 mm and nine SAE keys in 5\/64, 3\/32, 1\/8, 5\/32, 3\/16, 7\/32, 1\/4, 5\/16 and 3\/8 inch. Ball point long arms reach fasteners at angles of up to 25 degrees, and the straight short ends are machined for a tight fit, to apply higher torque without damaging the fastener.\u003c\/li\u003e\n\u003cli\u003eTORX SET AND FOLDING HOLDERS — Nine TX keys form a Torx set in TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30 and TX40. Each of the three key groups (metric hex, SAE hex and TX) is housed in its own folding plastic holder, so a full range comes out of the tray together and goes back the same way. The TT1 tray adds a removable lid and dovetail joints.\u003c\/li\u003e\n\u003cli\u003eTRAY SIZES AND SUPPLY — The measuring tray is TT2 size, 282 x 265 mm (11.1 x 10.4 inch) and 50 mm (2 inch) high, at 1136 g (2.5 lb). The key tray is TT1 size, 265 x 142 mm (10.4 x 5.6 inch), at 1177 g (2.6 lb). Both are shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-MEASURE\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565013385559,"sku":"BDL-MEASURE","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_9ebb5efc-d842-4f7f-89de-12bb1cff8fdb.jpg?v=1792801614"},{"product_id":"teng-tools-sheet-metal-set-rivet-gun-left-and-right-cut-snips-and-sheet-metal-hammer-bdl-sheetmetal","title":"Teng Tools Sheet Metal Set - Pop Rivet Gun Kit with 80 Rivets, Right Cut and Left Cut Compact Tin Snips, Sheet Metal Hammer - BDL-SHEETMETAL","description":"\u003cp\u003eFor sheet metal and panel work: right cut and left cut snips for curves in either direction, a hammer for forming, and a pop rivet gun with 80 blind rivets to fasten the result. This bundle puts the four Teng Tools products for cutting, shaping and joining thin metal into one order for body shops, HVAC and duct fabricators, maintenance crews and fabrication benches.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTTHR81: 81-piece rivet gun set. Hand riveter, 80 assorted aluminum blind rivets, four nose pieces for 2.4, 3.2, 4.0 and 4.8 mm rivets, TT1 tool tray.\u003c\/li\u003e\n\u003cli\u003e493-7N: compact tin snip, straight and right cut, CrMo blades, 182 mm (7.2 inch).\u003c\/li\u003e\n\u003cli\u003e494-7N: compact tin snip, straight and left cut, CrMo blades, 182 mm (7.2 inch).\u003c\/li\u003e\n\u003cli\u003eHMBH03: body working hammer, round crown face and square milled face, hickory handle, 325 mm (12.8 inch).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe two snips are a pair, not a duplicate. The 493-7N follows a curve to the right and the 494-7N a curve to the left, and both cut straight. Each cuts up to 1.5 mm steel or 0.9 mm stainless steel and locks closed with a quick release safety lock for carrying.\u003c\/p\u003e\u003cp\u003eThe riveter handles aluminum and steel rivets from 2.4 to 4.8 mm and stainless steel rivets up to 4.0 mm, so it is not limited to the aluminum rivets for metal panels supplied in the tray. Rivets sit in individual compartments, so the sizes stay sorted.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHAND RIVETER, 81 PIECES (TTHR81) — A hand riveter with 80 assorted aluminum blind pop rivets in individual storage compartments and four interchangeable nose pieces for 2.4, 3.2, 4.0 and 4.8 mm rivets. It sets aluminum and steel rivets from 2.4 to 4.8 mm and stainless steel rivets up to 4.0 mm. Aluminum alloy and forged steel upper handle with heat-treated jaws, in a TT1 tool tray. Weight 917 g (2.0 lb).\u003c\/li\u003e\n\u003cli\u003eRIGHT CUT SNIP (493-7N) — The straight and right cut compact tin snip, 182 mm (7.2 inch), for straight lines and curves to the right. Drop forged chrome molybdenum alloy steel blades with serrated edges cut up to 1.5 mm (0.06 inch) steel or 0.9 mm (0.035 inch) stainless steel. A sheet metal cutter compact enough to carry on the job, with a quick release safety lock. Weight 210 g (7.4 oz).\u003c\/li\u003e\n\u003cli\u003eLEFT CUT SNIP (494-7N) — The matching straight and left cut version, the same 182 mm length and the same steel and stainless capacity, for straight lines and curves to the left. With both metal snips on hand a curve can be followed in either direction. The spring-loaded mechanism and bi-material grip make repetitive cutting quicker and easier on the hand. Weight 210 g (7.4 oz).\u003c\/li\u003e\n\u003cli\u003eBODY WORKING HAMMER (HMBH03) — A 325 mm (12.8 inch) hammer for forming. The forged alloy steel head has a mirror-polished 32.5 mm (1.28 inch) round crown face for shaping and smoothing and a square milled face for shrinking metal, set on a hickory handle with a traditional grip for long sessions. Weight 468 g (16.5 oz).\u003c\/li\u003e\n\u003cli\u003eCUT, FORM, FASTEN — Panel and duct work runs in that order: the two snips cut the shape, the hammer forms and flattens the edge, and the riveter joins the result with blind rivets set from one side. Four standard Teng Tools products, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-SHEETMETAL\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565013582167,"sku":"BDL-SHEETMETAL","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_6a65e918-aa0f-40f1-8930-2e70efb4a959.jpg?v=1792801625"},{"product_id":"teng-tools-bearing-and-gear-removal-set-gear-pullers-soft-face-hammer-and-punches-and-chisels-bdl-bearing","title":"Teng Tools Bearing and Gear Removal Set - 2 and 3 Arm Gear Puller Set, Soft Face Hammer, 9 Piece Pin Punch and Cold Chisel Set - BDL-BEARING","description":"\u003cp\u003eFor removing gears, pulleys and bearings: two and three arm pullers, a soft face hammer that reduces marking on the parts, and pin punches and chisels for drifting out pins and shafts. This bundle puts the three Teng Tools products a removal job calls for into one order.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTT804: 4-piece combination puller set. Three-legged puller, extra yoke for two-legged pulling, reversible legs for internal or external grip, TT1 tool tray.\u003c\/li\u003e\n\u003cli\u003eHMSF: double-headed soft face hammer, 320 mm (12.6 inch), 652 g (1.4 lb).\u003c\/li\u003e\n\u003cli\u003eTTPC09: 9-piece chisel and punch set. Six parallel pin punches in a clip, one centre punch, two flat cold chisels, chrome molybdenum steel, TT1 tool tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe puller converts between three legs and two with its extra yoke, and the legs reverse, so it grips a part from the outside or from inside a bore. The soft face hammer keeps the striking marks off machined faces while the puller is set up and the part is coaxed free.\u003c\/p\u003e\u003cp\u003eThe punch and chisel tray covers the steps before and after the pull: drifting out retaining pins, marking a centre and cutting with a flat cold chisel. Both the puller and the punches arrive in Teng Tools TT1 tool tray modules, so they store in a drawer as organized sets.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTWO AND THREE ARM PULLER (TT804) — A 4-piece combination puller set: a three-legged puller plus an extra yoke that converts it to two-legged pulling, so one set works as a 3 arm or a 2 jaw puller. The legs reverse for internal or external grip. Designed for fast removal of pulleys, bearings and gears, it is the pulley puller and gear remover of this bundle, organized in a TT1 tool tray. Weight 1419 g (3.1 lb).\u003c\/li\u003e\n\u003cli\u003eSOFT FACE HAMMER (HMSF) — A double-headed soft face hammer whose soft faces reduce marking on the surface being hit. Use it to tap a puller square, nudge a gear that has started to move or seat a replacement part without leaving a mark. The mallet hammer of the set, 320 mm (12.6 inch) overall with a weight of 652 g (1.4 lb).\u003c\/li\u003e\n\u003cli\u003ePUNCHES AND CHISELS, 9 PIECES (TTPC09) — A pin punch set and cold chisels in one TT1 tray: six parallel pin punches held in a clip, one centre punch and two flat cold chisels, in chrome molybdenum steel with hardened edges and points. The pin punches drift out pins and shafts, the centre punch marks a start point and the chisels cut. Weight 1428 g (3.1 lb).\u003c\/li\u003e\n\u003cli\u003eWHY THESE THREE — Removing a gear, pulley or bearing is rarely a one-tool job. Retaining pins come out first with the punches, the puller draws the part off the shaft, and the soft face hammer taps the puller true or frees a part that has started to move, without marking it. Bought as one order, the three are on the bench together when the job starts.\u003c\/li\u003e\n\u003cli\u003eFOR MAINTENANCE AND REPAIR WORK — Suited to maintenance shops, plant engineering, agricultural and automotive workshops and service technicians who strip down drives and assemblies. Three standard Teng Tools products, TT804, HMSF and TTPC09, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-BEARING\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565013778775,"sku":"BDL-BEARING","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_aa44f72f-b3e5-4984-ae2c-bb0259f7c2dc.jpg?v=1792801636"},{"product_id":"teng-tools-scaffolder-set-19-x-22-mm-ratcheting-podger-compact-bolt-cutter-tape-and-level-bdl-scaffold","title":"Teng Tools Scaffolder Set - 19 x 22 mm Ratcheting Podger Spud Wrench, Compact Bolt Cutter, 8 m Tape Measure and Torpedo Level - BDL-SCAFFOLD","description":"\u003cp\u003eFor scaffold and steel erection: the 19 x 22 mm ratcheting podger for scaffold fittings, a compact cutter for ties and wire, an 8 m (26 ft) tape and a torpedo-style spirit level, bought as one Teng Tools bundle.\u003c\/p\u003e\u003cp\u003eWhat is in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePGW1922: ratcheting construction wrench with 19 mm and 22 mm 12 point sockets, a 32 tooth ratchet, flip reverse lever and tapered podger handle with a tethering hole. 315 mm (12.4 inch) long.\u003c\/li\u003e\n\u003cli\u003eBC408: 200 mm (8 inch) compact cutter for bolts, rods and wire, chrome molybdenum alloy steel, vinyl handles, return spring and lock.\u003c\/li\u003e\n\u003cli\u003eMT08: 8 m (26 ft) measuring tape graduated in metric and inch, 25 mm wide blade, tape lock, belt clip, power return and rubberised grip.\u003c\/li\u003e\n\u003cli\u003eSLT01: 230 mm aluminum spirit level with 3 magnets and horizontal, vertical and 45 degree vials.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhy these four go together: on a scaffold or a steel frame the same few jobs repeat. Fittings are tightened and released with the podger, whose tapered handle also lines up holes before a bolt goes in. Ties, wire and small rods are cut with the cutter. Lifts and spacings are checked with the tape, and the level holds on steel by its magnets while plumb and level are checked. The podger is also suited to pallet racking, shelving systems and metal panel erection.\u003c\/p\u003e\u003cp\u003eThe podger handle has a hole for a fall protection wire, the cutter locks shut for carrying, and the tape clips to a belt, so the kit is easy to carry on a belt or in a pouch.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFOUR TOOLS FOR SCAFFOLD AND STEEL ERECTION — This bundle puts four standard Teng Tools products into one order for scaffold and steel erection work: the PGW1922 19 x 22 mm ratcheting podger, a scaffold wrench for the fittings; the BC408 compact cutter for ties and wire; the MT08 8 m (26 ft) measuring tape; and the SLT01 torpedo-style aluminum level. One order puts the fixing, cutting, measuring and levelling tools on the same belt.\u003c\/li\u003e\n\u003cli\u003eSCAFFOLD RATCHET, 19 X 22 MM — The PGW1922 is a ratcheting wrench for construction, carrying 19 mm and 22 mm 12 point sockets, one at each end, with a 32 tooth ratchet for strength on outdoor sites and a flip reverse lever to switch between tightening and loosening. The tapered podger handle aligns holes before fixing, and a hole in the handle takes a fall protection wire. It is 315 mm (12.4 inch) long and weighs 463 g (1 lb).\u003c\/li\u003e\n\u003cli\u003eSMALL BOLT CUTTERS FOR TIES AND WIRE — The BC408 is 200 mm (8 inch) long, in chrome molybdenum alloy steel, with an 80 degree cutting edge angle and induction hardened edges at HRC 58. Rated capacities are 3.6 mm (0.14 inch) piano wire, 4 mm (0.16 inch) steel wire and 5.2 mm (0.2 inch) iron wire. A return spring reopens the jaws, a lock keeps them closed for storage, and the vinyl grip slides into a pouch.\u003c\/li\u003e\n\u003cli\u003e8 M TAPE AND MAGNETIC SPIRIT LEVEL — The MT08 tape reads 8 m (26 ft) in both mm and inches on a 25 mm (1 inch) wide blade, with an ABS case, rubberised grip for wet or oily hands, tape lock, belt clip, power return and an aligning hook. The SLT01 is a 230 mm (9.1 inch) aluminum level with 3 magnets on the underside to hold on steel, horizontal, vertical and 45 degree vials, and a tolerance of 1.0 mm\/m.\u003c\/li\u003e\n\u003cli\u003eBUILT FOR SITE USE, SHIPPED AS ONE — The level has crush proof, high-transparency vials that resist UV light and temperature changes, plus shock absorbent end protectors. The tape weighs 370 g (13 oz), the cutter 277 g (9.8 oz) and the level 144 g (5.1 oz). All four items ship together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-SCAFFOLD\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565013975383,"sku":"BDL-SCAFFOLD","price":120.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_3989b8ac-6aaf-4e66-8f64-44d9a70eb984.jpg?v=1792801649"},{"product_id":"teng-tools-heavy-duty-3-4-inch-drive-set-50-to-300-ft-lb-torque-wrench-and-19-inch-breaker-bar-bdl-heavy34","title":"Teng Tools 3\/4 Inch Drive Set for Large Fasteners, 50 to 300 ft-lb Torque Wrench and 19 Inch Flex Head Breaker Bar, No Sockets - BDL-HEAVY34","description":"\u003cp\u003eFor large fasteners on heavy equipment and plant, this Teng Tools bundle pairs a 19 inch 3\/4 inch drive breaker bar to loosen big fasteners with a 50 to 300 ft-lb 3\/4 inch drive torque wrench to tighten them to spec.\u003c\/p\u003e\u003cp\u003eThe 3492UAG-E is designed for applying a specific torque when tightening fasteners. It is adjustable within a range of 50 to 300 ft-lb to meet the requirements of the job, which puts much of the large hardware on equipment and plant within one wrench.\u003c\/p\u003e\u003cp\u003eThe M340070-C is a 3\/4 inch square drive bar, 480 mm (18.9 inch) long, with an articulating flex head for improved access in confined or angled applications. Built for demanding professional use, it delivers the leverage to break loose fasteners before the torque wrench sets the final value.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/4 inch Torque Wrench 50 to 300 ft-lb (3492UAG-E), quantity 1\u003c\/li\u003e\n\u003cli\u003e3\/4 Inch Drive 19 Inch Long Breaker Bar (M340070-C), quantity 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003eBoth tools use the 3\/4 inch square drive, so one set of 3\/4 drive sockets serves the whole job, from breaking a fastener loose to tightening it back to the value on the spec sheet.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/4 DRIVE TORQUE WRENCH, 50 TO 300 FT-LB: The 3492UAG-E is a 3\/4 inch square drive torque wrench, adjustable from 50 to 300 ft-lb, for applying a specific torque when tightening the big fasteners on heavy equipment and plant. Set the value from the spec sheet and tighten each fastener to it, so the large hardware is done to a number rather than by feel or by the length of a cheater pipe.\u003c\/li\u003e\n\u003cli\u003eBREAKER BAR WITH FLEX HEAD: The M340070-C is a 19 inch (480 mm) 3\/4 inch square drive breaker bar with a pivoting flex head for applying torque at various angles. Use it to break loose big fasteners before the torque wrench goes on, and to reach fasteners at awkward angles where a fixed head will not line up. It weighs 1902 g (4.2 lb) and is built for demanding professional use.\u003c\/li\u003e\n\u003cli\u003eWHAT IS IN THE BOX: Two separate Teng Tools products shipped together: a 3\/4 inch Torque Wrench, 50 to 300 ft-lb (3492UAG-E) and a 3\/4 Inch Drive 19 Inch Long Breaker Bar (M340070-C). Each is a standard Teng Tools product, the same item listed on its own under that part number, packed and shipped to you as one order rather than two.\u003c\/li\u003e\n\u003cli\u003eLOOSEN, THEN TIGHTEN TO SPEC: The two tools split the job between them: the breaker bar loosens big fasteners, and the torque wrench tightens them to spec. Both share the 3\/4 inch square drive, so the same 3\/4 drive sockets fit either tool and the changeover is a matter of moving the socket from one handle to the other.\u003c\/li\u003e\n\u003cli\u003eFOR HEAVY EQUIPMENT AND PLANT: Made for the fasteners that a 1\/2 inch drive kit does not reach, this pair covers loosening and controlled tightening on heavy equipment and plant work. Sockets are not included, and hub-piloted heavy truck wheel nuts commonly need more torque than its 300 ft-lb top setting. Both tools ship together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects. Add your own 3\/4 drive sockets and the job is ready.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-HEAVY34\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565014204759,"sku":"BDL-HEAVY34","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_d307e82a-4b0f-421d-ab12-255b569be79d.jpg?v=1792801659"},{"product_id":"brake-caliper-bracket-socket-kit-13-piece","title":"Teng Tools Brake Caliper and Bracket Socket Kit, 13 Pieces: 1\/2 Inch Drive Deep Impact Sockets 13 to 19 and 21 mm, Ratchet, Breaker Bar, Torque Wrench","description":"\u003cp\u003eBrake caliper and bracket bolts in one order: break them loose, run them out, torque them back. Eight 1\/2 inch drive deep impact sockets, 13 to 19 and 21 mm, a 45-tooth ratchet, a 150 mm wobble extension, a 600 mm breaker bar, a 25 to 250 ft-lb torque wrench and a 10 x 11 mm flare nut wrench for the brake line nuts.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-6-point-metric-din-deep-impact-socket\"\u003e1\/2 inch drive 6 point metric DIN deep impact socket\u003c\/a\u003e: 13 mm, 14 mm, 15 mm, 18 mm, 19 mm, 21 mm (920613N, 920614N, 920615N, 920618N, 920619N, 920621N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-deep-impact-socket-ansi-metric\"\u003e1\/2 inch drive metric ANSI deep impact socket\u003c\/a\u003e: 16 mm, 17 mm (920616AN, 920617AN)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratchet-frp-45-teeth\"\u003e45 tooth ratchet handle\u003c\/a\u003e (1200FRP)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-wobble-extension-bar\"\u003e1\/2 inch drive wobble extension bar\u003c\/a\u003e (M120021W-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-breaker-bar-din-3122\"\u003e1\/2 inch drive breaker bar, DIN 3122\u003c\/a\u003e (1201A)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flare-nut-wrench-metric\"\u003eMetric flare nut wrench, double open end\u003c\/a\u003e (641011)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-1-2-torque-wrench-25-250-ft-lb-1292uag-e4\"\u003e1\/2 inch drive torque wrench, 25 to 250 ft-lb\u003c\/a\u003e (1292UAG-E4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55747875766615,"sku":"BDL-BRAKE-CALIPER-BRACKET-12","price":296.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_a47ace61-7374-4ada-b47b-c7db7d869329.jpg?v=1794255181"},{"product_id":"1-2-inch-drive-sae-hex-bit-impact-socket-set-10-piece","title":"Teng Tools 1\/2 Inch Drive SAE Hex Bit Impact Socket Set, 10 Pieces: Sockets 3\/16 to 3\/4 Inch for Socket Head Cap Screws","description":"\u003cp\u003eHex bit impact sockets for socket head cap screws and set screws on inch equipment. Ten sockets on 1\/2 inch drive, one each from 3\/16 to 3\/4 inch.\u003c\/p\u003e\u003cp\u003eThe set has no impact wrench or handle. Bring a 1\/2 inch drive impact wrench, ratchet or breaker bar to turn the sockets.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-sae-din-hex-bit-impact-socket\"\u003eSAE DIN hex bit impact sockets\u003c\/a\u003e: 3\/16\", 1\/4\", 5\/16\", 3\/8\", 7\/16\", 1\/2\", 9\/16\", 5\/8\", 11\/16\", 3\/4\" (921606, 921608, 921610, 921612, 921614, 921616, 921618, 921620, 921622, 921624)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748491280727,"sku":"BDL-12-SAE-IMPACT-HEX-BIT","price":120.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_c2df9ae9-15a0-433d-aad5-b7da12db88ef.jpg?v=1794137644"},{"product_id":"automotive-student-metric-tool-kit-108-piece","title":"Teng Tools Automotive Student Metric Tool Kit, 108 Pieces: Sockets in 1\/4, 3\/8 and 1\/2 Inch Drive, Wrenches 8 to 19 mm, Screwdrivers, Pliers, Hammers","description":"\u003cp\u003eThe hand tools for an automotive technology class in one order. Metric sockets in 1\/4, 3\/8 and 1\/2 inch drive with a ratchet for each drive, twelve combination wrenches from 8 to 19 mm, seven screwdrivers, four pliers, hex and Torx keys, a ball pein hammer, a dead blow hammer and a magnetic parts tray.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/spanner-socket-set-foam3-57-pieces\"\u003e57 piece 1\/4 and 3\/8 inch drive metric socket and combination wrench set with two 72-tooth ratchets in a foam tray\u003c\/a\u003e (TEFSK57)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-socket-set-6-pt-tt1-17-pieces\"\u003e17 piece 1\/2 inch drive 6 point metric socket set\u003c\/a\u003e (TT1217-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-ratchet-accessories-set-tt1-5-pieces\"\u003e5 piece 1\/2 inch drive ratchet set: ratchet, extensions, universal joint, adaptor\u003c\/a\u003e (TT1205)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece flat, Phillips and Pozi screwdriver set\u003c\/a\u003e (TT917N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/plier-set-tpr-grip-tt1-4-pieces\"\u003e4 piece pliers set: side cutting, combination, long nose, water pump\u003c\/a\u003e (TT440-T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ball-point-hex-key-set-7-pieces\"\u003e7 piece metric ball point hex key set in a folding holder\u003c\/a\u003e (1475)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-tx-key-set-8-pieces\"\u003e8 piece folding Torx key set, TX9 to TX40\u003c\/a\u003e (1476NTX)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ball-pein-hammer\"\u003eBall pein hammer with fiberglass shaft and rubber type handle\u003c\/a\u003e (HMBP16)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/polyurethane-dead-blow-hammer\"\u003eSteel ball dead blow hammer with polyurethane head and textured grip\u003c\/a\u003e (HMDH50PU)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/magnetic-bits-tray-round\"\u003e150 mm (5.9 in) round magnetic tray for bits and small parts\u003c\/a\u003e (580)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748491477335,"sku":"BDL-FIRST-YEAR-AUTOMOTIVE","price":588.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_a37858b7-c796-44c8-afa4-5d91d9201c44.jpg?v=1794140829"},{"product_id":"outboard-propeller-change-kit-12-piece","title":"Teng Tools Outboard Propeller Change Kit, 12 Pieces: 1\/2 Inch Drive Deep Impact Sockets 22, 24, 27 and 30 mm, Breaker Bar, Dead Blow, Torque Wrench","description":"\u003cp\u003eA propeller change on an outboard takes the same few tools each time. This kit has four 1\/2 inch drive deep impact sockets, a 600 mm (24 inch) breaker bar, a 750 g dead blow hammer, side cutting pliers, a hook and pick set and an adjustable 10 to 150 ft-lb torque wrench.\u003c\/p\u003e\u003cp\u003ePropeller nut sizes differ by outboard. Check yours against 22, 24, 27 and 30 mm, the four socket sizes in this kit.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-breaker-bar-din-3122\"\u003e1\/2 inch drive breaker bar, 600 mm (24 inch)\u003c\/a\u003e (1201A)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-6-point-metric-din-deep-impact-socket\"\u003e1\/2 inch drive 6 point metric deep impact sockets\u003c\/a\u003e: 22 mm, 24 mm, 27 mm, 30 mm (920622N, 920624N, 920627N, 920630N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/polyurethane-dead-blow-hammer\"\u003e750 g (1.6 lb) polyurethane dead blow hammer\u003c\/a\u003e (HMDH50PU)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/heavy-duty-side-cutting-plier\"\u003e160 mm (6.3 in) heavy duty side cutting pliers, CrMo steel\u003c\/a\u003e (MB442-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hook-pick-set-with-belt-clip-4-pieces\"\u003e4 piece hook and pick set with belt clip\u003c\/a\u003e (TJ149)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-1-2-torque-wrench-10-150-ft-lb-1292uag-ep\"\u003e1\/2 inch drive torque wrench, 10 to 150 ft-lb\u003c\/a\u003e (1292UAG-EP)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748491641175,"sku":"BDL-OUTBOARD-PROP-CHANGE-12","price":241.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_b8def9c6-1a6f-4bb5-b5b5-5e266b3f6e6c.jpg?v=1794133581"},{"product_id":"electrician-student-tool-kit-147-piece","title":"Teng Tools Electrician Student Tool Kit, 147 Pieces: 1000 V Insulated Pliers, VDE Screwdrivers, Voltage Tester, 121 Piece Crimp Kit, Headlamp","description":"\u003cp\u003eAn electrical program starts with insulated pliers and screwdrivers, a voltage tester and the hand tools that go with them. The kit has a 4 piece 1000 V insulated plier set, a 7 piece VDE screwdriver set, an AC voltage tester pen, a 121 piece crimping plier and terminal kit, a folding utility knife, a rechargeable headlamp, an adjustable wrench, a 10 piece SAE hex key set and a claw hammer.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-plier-set-tt1-4-pieces\"\u003e4 piece 1000 V insulated plier set: side cutting, combination, long nose, wire stripping\u003c\/a\u003e (TTV440)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece VDE electrical screwdriver set, flat, Phillips and Pozi\u003c\/a\u003e (TTV907N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/voltage-tester\"\u003eAC voltage tester pen, 105 to 250 V, pocket clip\u003c\/a\u003e (MDV9855)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/crimping-plier-set-tt1-121-pieces\"\u003e121 piece crimping pliers and insulated terminal kit\u003c\/a\u003e (TTCP121)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-utility-knife\"\u003e19 mm folding utility knife, 60 mm blade extension\u003c\/a\u003e (712)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/rechargeable-led-headlamp-350-lm\"\u003eRechargeable LED headlamp, 350 lumens, USB-C charging\u003c\/a\u003e (586D)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/adjustable-wrench\"\u003eAdjustable wrench\u003c\/a\u003e (4002)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-key-set-af-10-pieces\"\u003e10 piece SAE hex key set, chrome vanadium L-keys on a ring\u003c\/a\u003e (1424)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/carpenters-claw-hammer\"\u003eCarpenters claw hammer, steel handle, rubber grip\u003c\/a\u003e (HMCH13A)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748492132695,"sku":"BDL-ELECTRICAL-STUDENT-1000","price":243.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_e7486421-ca0f-42cb-8724-00203eee28f5.jpg?v=1794135774"},{"product_id":"boat-sae-tool-kit-42-piece","title":"Teng Tools Boat SAE Tool Kit, 42 Pieces: Wrenches 5\/16 to 3\/4 Inch, Hex and TX Keys, Screwdrivers, Pliers, Hacksaw, Headlamp","description":"\u003cp\u003eOne kit of SAE hand tools for repairs aboard. Eight combination wrenches from 5\/16 to 3\/4 inch, SAE hex keys and folding TX keys, screwdrivers, four pliers (two locking, water pump and side cutting), an adjustable wrench, a knife, a hacksaw, a magnetic pickup and a headlamp.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/combination-spanner-set-af-tt1-8-pieces\"\u003e8 piece SAE 12 point combination wrench set, 5\/16 to 3\/4 inch\u003c\/a\u003e (TT3592)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-key-set-af-10-pieces\"\u003e10 piece SAE hex key set, 1\/16 to 3\/8 inch\u003c\/a\u003e (1424)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-tx-key-set-8-pieces\"\u003eFolding TX star key set, TX9 to TX40\u003c\/a\u003e (1476NTX)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-6-pieces\"\u003e6 piece flat, Phillips and Pozi screwdriver set\u003c\/a\u003e (MD906N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-stubby-ratcheting-bits-driver-set\"\u003e1\/4 inch stubby ratcheting bit driver\u003c\/a\u003e (MDR908S)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/power-grip-plier-set-155-250mm\"\u003e2 piece locking pliers set: long nose and curved jaw\u003c\/a\u003e (402)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/water-pump-plier\"\u003e180 mm (7.1 in) water pump pliers\u003c\/a\u003e (MB481-7)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/heavy-duty-side-cutting-plier\"\u003e160 mm (6.3 in) heavy duty side cutting pliers\u003c\/a\u003e (MB442-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/adjustable-wrench\"\u003e200 mm (7.9 in) adjustable wrench\u003c\/a\u003e (4003)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-utility-knife\"\u003e19 mm folding utility knife\u003c\/a\u003e (712)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/mini-hacksaw-24tpi-metal\"\u003e150 mm (5.9 in) mini hacksaw, 24 TPI\u003c\/a\u003e (705)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/telescopic-magnetic-pick-up-tool-and-pen\"\u003eTelescoping magnetic pickup, 630 mm (24.8 in)\u003c\/a\u003e (585MP)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/rechargeable-led-headlamp-350-lm\"\u003eRechargeable LED headlamp, 350 lumens\u003c\/a\u003e (586D)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748492230999,"sku":"BDL-BOAT-TOOL-SAE-516-34","price":262.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_8b1d8398-f3f7-4006-967d-1bb2f0911ff7.jpg?v=1794133530"},{"product_id":"metric-and-sae-wheel-nut-kit-9-piece","title":"Teng Tools Metric and SAE Wheel Nut Kit, 9 Pieces: 1\/2 Inch Drive Sockets 17, 19, 21, 22 mm, 13\/16 and 7\/8 Inch, Breaker Bar, Torque Wrench","description":"\u003cp\u003eTake the wheel nuts off, then torque them back to the figure. This kit has 1\/2 inch drive impact sockets in 17, 19, 21 and 22 mm and 13\/16 and 7\/8 inch, a 450 mm breaker bar, a 125 mm impact extension and an adjustable 10 to 150 ft-lb torque wrench.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/wheel-tool-set-5-pieces\"\u003e5 piece 1\/2 inch drive wheel tool set: 17, 19, 21 mm impact sockets, impact extension, breaker bar\u003c\/a\u003e (TEXW05)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/regular-impact-socket\"\u003e1\/2 inch drive metric impact socket, 22 mm\u003c\/a\u003e (920522AN)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-6-point-sae-din-impact-socket\"\u003e1\/2 inch drive 6 point SAE impact sockets, 13\/16 and 7\/8 inch\u003c\/a\u003e: 13\/16 inch, 7\/8 inch (920126, 920128)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-1-2-torque-wrench-10-150-ft-lb-1292uag-ep\"\u003e1\/2 inch drive adjustable torque wrench, 10 to 150 ft-lb\u003c\/a\u003e (1292UAG-EP)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748492493143,"sku":"BDL-WHEEL-NUT-12-THIN-WALL","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_66bcc920-10bf-4aa2-9cd4-dd98b1f4fb2a.jpg?v=1794132333"},{"product_id":"apprentice-electrician-tool-kit-23-piece","title":"Teng Tools Apprentice Electrician Tool Kit, 23 Pieces: Screwdrivers, Pliers, Wire Strippers, Knife, Adjustable Wrench, Hammer, Tester, Headlamp","description":"\u003cp\u003eA first-day tool list in one order. Seven screwdrivers, three vinyl grip pliers, wire strippers, a folding utility knife, a 200 mm adjustable wrench, a claw hammer, seven mini hex keys, an AC voltage tester pen and a rechargeable headlamp.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece flat, Phillips and Pozi screwdriver set in a TT1 tray\u003c\/a\u003e (TT917N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/vinyl-grip-plier-set-tt1-3-pieces\"\u003e3 piece vinyl grip plier set: side cutter, combination, long nose\u003c\/a\u003e (TTMB03)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/wire-stripping-plier-with-tpr-grip\"\u003e178 mm (7 in) CrMo wire strippers with TPR grip\u003c\/a\u003e (MB499-7T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-utility-knife\"\u003e19 mm folding utility knife with 60 mm blade extension\u003c\/a\u003e (712)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/adjustable-wrench\"\u003eAdjustable wrench, 200 mm (8 in)\u003c\/a\u003e (4003)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/carpenters-magnetic-claw-hammer-16oz\"\u003eClaw hammer with polished steel head\u003c\/a\u003e (HMCH16M)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/mini-hex-key-set-af-7-pieces\"\u003e7 piece mini SAE hex key set in a folding holder\u003c\/a\u003e (1477AF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/voltage-tester\"\u003eAC voltage tester pen, 105 to 250 V\u003c\/a\u003e (MDV9855)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/rechargeable-led-headlamp-350-lm\"\u003eRechargeable LED headlamp, 350 lumens\u003c\/a\u003e (586D)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748492689751,"sku":"BDL-APPRENTICE-ELECTRICIAN","price":201.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_1801c29c-f7c3-49f2-bbd3-8c00f333a61b.jpg?v=1794133357"},{"product_id":"industrial-maintenance-student-tool-kit-166-piece","title":"Teng Tools Industrial Maintenance Student Tool Kit, 167 Pieces: SAE and Metric Sockets in Three Drive Sizes, Wrenches, Pliers, Screwdrivers, Hex Keys","description":"\u003cp\u003eIndustrial equipment carries both SAE and metric fasteners, and this kit covers both in one order: sockets in 1\/4, 3\/8 and 1\/2 inch drive with a ratchet for each drive, combination wrenches, screwdrivers, pliers, hex and TX keys, an adjustable wrench, a ball pein hammer and a folding utility knife.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-socket-set-6-pt-tt1-35-pieces\"\u003e35 piece 1\/4 inch drive metric socket set\u003c\/a\u003e (TT1435)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-3-8-socket-set-af-6-pt-tt1-32-pieces\"\u003e32 piece 1\/4 and 3\/8 inch drive SAE socket set, regular and deep\u003c\/a\u003e (TTAF32)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-socket-set-6-pt-tt1-17-pieces\"\u003e17 piece 1\/2 inch drive 6 point metric socket set\u003c\/a\u003e (TT1217-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-socket-set-12-pt-af-tt1-15-pieces\"\u003e15 piece 1\/2 inch drive SAE 12 point socket set\u003c\/a\u003e (TT1215AF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-ratchet-accessories-set-tt1-5-pieces\"\u003e5 piece 1\/2 inch drive ratchet set\u003c\/a\u003e (TT1205)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-12-piece-metric-combination-wrench-set-8-19mm-tt1236\"\u003e12 piece metric combination wrench set, 8 to 19 mm\u003c\/a\u003e (TT1236)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/combination-spanner-set-af-tt1-8-pieces\"\u003e8 piece SAE 12 point combination wrench set, 5\/16 to 3\/4 inch\u003c\/a\u003e (TT3592)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece flat, Phillips and Pozi screwdriver set\u003c\/a\u003e (TT917N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/plier-set-tpr-grip-tt1-4-pieces\"\u003e4 piece pliers set: side cutting, combination, long nose, water pump\u003c\/a\u003e (TT440-T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ball-point-hex-tx-key-set-tt1-28-pieces\"\u003e28 piece hex and TX key set, metric and SAE\u003c\/a\u003e (TTHT28)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/adjustable-wrench\"\u003eAdjustable wrench, 200 mm (8 in)\u003c\/a\u003e (4003)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ball-pein-hammer\"\u003e16 oz ball pein hammer, fiberglass shaft\u003c\/a\u003e (HMBP16)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-utility-knife\"\u003e19 mm folding utility knife\u003c\/a\u003e (712)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratchet-frp-45-teeth\"\u003e3\/8 inch drive ratchet, 45 teeth\u003c\/a\u003e (3800FRP)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748492984663,"sku":"BDL-INDUSTRIAL-MAINTENANCE","price":675.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_621d391a-89b6-4932-90c2-075108ab3893.jpg?v=1794226382"},{"product_id":"metric-maintenance-tool-kit-66-piece","title":"Teng Tools Metric Maintenance Tool Kit, 66 Pieces: 1\/2 Inch Drive Sockets and Ratchet Set, Wrenches 8 to 19 mm, Pliers, Screwdrivers, Hex Keys","description":"\u003cp\u003eA first-day hand tool issue for a maintenance technician working on metric equipment. A general hand tool set, 1\/2 inch drive metric sockets with a ratchet set, combination wrenches from 8 to 19 mm, four pliers, seven screwdrivers, ten hex keys, a rechargeable headlamp and a telescoping magnetic pickup.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/general-tool-set-bp-tt4-9-pieces\"\u003e9 piece general hand tool set: adjustable wrenches, hammers, plier, hacksaw, knife, tape, rule\u003c\/a\u003e (TTPS09)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece flat, Phillips and Pozi screwdriver set\u003c\/a\u003e (TT917N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-socket-set-6-pt-tt1-17-pieces\"\u003e17 piece 1\/2 inch drive 6 point metric socket set\u003c\/a\u003e (TT1217-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-ratchet-accessories-set-tt1-5-pieces\"\u003e5 piece 1\/2 inch drive ratchet set: ratchet, extensions, universal joint, adaptor\u003c\/a\u003e (TT1205)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-12-piece-metric-combination-wrench-set-8-19mm-tt1236\"\u003e12 piece metric combination wrench set, 8 to 19 mm\u003c\/a\u003e (TT1236)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/plier-set-tpr-grip-tt1-4-pieces\"\u003e4 piece pliers set: side cutting, combination, long nose, water pump\u003c\/a\u003e (TT440-T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-key-set-10-pieces\"\u003e10 piece metric hex key set\u003c\/a\u003e (1425)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/rechargeable-led-headlamp-350-lm\"\u003eRechargeable LED headlamp, 350 lumens, USB-C charging\u003c\/a\u003e (586D)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/telescopic-magnetic-pick-up-tool-and-pen\"\u003eTelescoping magnetic pickup tool and pen\u003c\/a\u003e (585MP)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748493148503,"sku":"BDL-TECHNICIAN-ISSUE-METRIC","price":488.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_6998b420-f65f-435c-af84-cbdec7920516.jpg?v=1794139555"},{"product_id":"strut-rod-hanger-spud-wrench-kit-13-piece","title":"Teng Tools Strut and Rod Hanger Spud Wrench Kit, 13 Pieces: 3\/4 x 7\/8 Inch Ratcheting Wrench, 1\/2 Inch Drive Deep Impact Sockets, Hacksaw","description":"\u003cp\u003eA hanging kit for installers working with strut and threaded rod. A 3\/4 x 7\/8 inch ratcheting wrench, four 1\/2 inch drive deep impact sockets from 9\/16 to 3\/4 inch, a 1\/2 inch drive ratchet, a 1\/4 inch hex adaptor, and a mini hacksaw with a pack of 5 spare blades, 13 pieces in all.\u003c\/p\u003e\u003cp\u003eThe 1\/4 inch hex adaptor needs a drill or driver of your own with a 1\/4 inch hex chuck, which this kit does not include.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratcheting-construction-wrench-19-x-22mm\"\u003eRatcheting construction wrench, 3\/4 x 7\/8 inch (19 x 22 mm)\u003c\/a\u003e (PGW1922)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-6-point-sae-din-deep-impact-socket\"\u003e1\/2 inch drive 6 point SAE deep impact sockets\u003c\/a\u003e: 9\/16\", 5\/8\", 11\/16\", 3\/4\" (920218, 920220, 920222, 920224)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratchet-frp-45-teeth\"\u003e45-tooth 1\/2 inch drive ratchet\u003c\/a\u003e (1200FRP)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-to-square-drive-bit-adaptor\"\u003e1\/4 inch hex to 1\/2 inch square drive adaptor, 50 mm (2 inch)\u003c\/a\u003e (ACCSDA1412)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/mini-hacksaw-24tpi-metal\"\u003e150 mm (6 inch) 24 TPI mini hacksaw\u003c\/a\u003e (705)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/replacement-blade-mini-hacksaw-24tpi-metal\"\u003ePack of 5 replacement mini hacksaw blades, 6 inch, 24 TPI\u003c\/a\u003e (705-5)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748493279575,"sku":"BDL-STRUT-ROD-HANGER-34-78","price":151.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_301f4dc4-2451-4bec-9b51-dc07b01add1c.jpg?v=1794133600"},{"product_id":"diesel-student-tool-kit-metric-68-piece","title":"Teng Tools Diesel Student Tool Kit, 68 Pieces: 1\/2 Inch Drive Metric Sockets 10 to 27 mm, Wrenches 8 to 32 mm, 25 to 250 ft-lb Torque Wrench","description":"\u003cp\u003eThe hand tools a diesel program asks a student to bring, in one order. A 34-piece 1\/2 inch drive metric socket set with a 45-tooth ratchet, combination wrenches from 8 to 32 mm, a 600 mm breaker bar, a 25 to 250 ft-lb torque wrench, a 1250 g lump hammer, a 500 mm pry bar, four pliers and seven screwdrivers.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/mecca-pro-1-2-drive-socket-set-6pt-34-pieces\"\u003e34 piece 1\/2 inch drive 6 point metric socket set, regular and deep, 10 to 27 mm\u003c\/a\u003e (T1234)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-12-piece-metric-combination-wrench-set-8-19mm-tt1236\"\u003e12 piece metric combination wrench set, 8 to 19 mm\u003c\/a\u003e (TT1236)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/combination-spanner-set-ttx4-7-pieces\"\u003e7 piece large metric combination wrench set, 20 to 32 mm\u003c\/a\u003e (TTX2032)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-breaker-bar-din-3122\"\u003e1\/2 inch drive breaker bar, 600 mm\u003c\/a\u003e (1201A)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-1-2-torque-wrench-25-250-ft-lb-1292uag-e4\"\u003e1\/2 inch drive torque wrench, 25 to 250 ft-lb\u003c\/a\u003e (1292UAG-E4)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/lump-hammer-1250g\"\u003e1250 g lump hammer, fiberglass handle\u003c\/a\u003e (HMS1250)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/roll-heel-pry-bar\"\u003eRoll heel pry bar, 500 mm (20 inch)\u003c\/a\u003e (PB20)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/plier-set-tpr-grip-tt1-4-pieces\"\u003e4 piece pliers set: side cutting, combination, long nose, water pump\u003c\/a\u003e (TT440-T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece flat, Phillips and Pozi screwdriver set\u003c\/a\u003e (TT917N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748493345111,"sku":"BDL-DIESEL-STUDENT-12","price":714.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_f0c06a2e-b6d8-4e24-a877-0c2e1b8f6bea.jpg?v=1794127372"},{"product_id":"rooftop-unit-service-kit-48-piece","title":"Teng Tools Rooftop Unit Service Kit, 48 Pieces: 1\/4 Inch Drive Sockets, SAE Wrenches 5\/16 to 3\/4 Inch, Gear Pullers, Insulated Screwdrivers, Headlamp","description":"\u003cp\u003eA rooftop unit call covers panels, drive parts, a motor and the control panel in one visit. This kit puts the small sockets, SAE wrenches, pullers, hex keys, electrical checks and a light in one order, 14 products and 48 pieces.\u003c\/p\u003e\u003cp\u003eThere is no ratchet in the kit; the 1\/4 inch drive sockets turn on the spinner handle. The 1\/4 inch hex bit adaptor needs your own driver that takes 1\/4 inch hex bits.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-drive-6-point-sae-deep-socket\"\u003e1\/4 inch drive 6 point SAE deep sockets\u003c\/a\u003e: 7\/32 in, 1\/4 in, 9\/32 in, 5\/16 in, 11\/32 in (M140207-C, M140208-C, M140209-C, M140210-C, M140211-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-spinner-handle\"\u003e1\/4 inch drive spinner handle, 150 mm (5.9 in)\u003c\/a\u003e (M140015-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-drive-extension-bar\"\u003e1\/4 inch drive extension bars\u003c\/a\u003e: 75 mm (2.9 in), 305 mm (12.0 in) (M140023-C, M140024-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-to-square-drive-bit-adaptor\"\u003e1\/4 inch hex to 1\/4 inch square drive bit adaptor, 50 mm\u003c\/a\u003e (ACCSDA1414)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/combination-spanner-set-af-tt1-8-pieces\"\u003e8 piece SAE 12 point combination wrench set, 5\/16 to 3\/4 inch\u003c\/a\u003e (TT3592)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/puller-set-tt1-4-pieces\"\u003e4 piece gear puller set, two-arm and three-arm\u003c\/a\u003e (TT804)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-key-set-af-10-pieces\"\u003e10 piece SAE hex key set on a ring\u003c\/a\u003e (1424)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/sae-t-handle-ball-point-hex-key\"\u003eSAE T-handle ball point hex keys\u003c\/a\u003e: 5\/32 in, 3\/16 in, 1\/4 in (510105, 510106, 510108)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-screwdriver-set-flat-ph-6-pieces\"\u003e6 piece 1000V insulated flat and Phillips screwdriver set\u003c\/a\u003e (MDV906N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/wire-stripping-plier-with-tpr-grip\"\u003e178 mm (7 in) CrMo wire strippers with TPR grip\u003c\/a\u003e (MB499-7T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/voltage-tester\"\u003eAC voltage tester pen, 105 to 250V\u003c\/a\u003e (MDV9855)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/rechargeable-led-headlamp-350-lm\"\u003eRechargeable LED headlamp, 350 lumens\u003c\/a\u003e (586D)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/magnetic-bits-tray-round\"\u003e150 mm (5.9 in) round magnetic tray for bits and small parts\u003c\/a\u003e (580)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hook-pick-set-with-belt-clip-4-pieces\"\u003e4 piece hook and pick set with belt clip\u003c\/a\u003e (TJ149)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748493443415,"sku":"BDL-ROOFTOP-UNIT-SERVICE-14","price":279.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_f80f692c-19f4-450a-9865-aafcc36bbfad.jpg?v=1794135807"},{"product_id":"4-inch-bench-vise-and-side-shelf-kit-4-piece","title":"Teng Tools 4 Inch Bench Vise and Side Shelf Kit, 4 Pieces: Forged Steel Vise, Roller Cabinet Side Shelf, 750 g Dead Blow Hammer, Soft Face Hammer","description":"\u003cp\u003eA vise station for a roller cabinet. A 4 inch heavy duty forged steel workbench vise, the roller cabinet side shelf made to fit it, and two hammers for working on parts held in the vise: a 750 g dead blow hammer and a soft face hammer with replaceable plastic tips.\u003c\/p\u003e\u003cp\u003eThe side shelf is made for a roller cabinet, which this kit does not include.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/4-work-bench-vice\"\u003e4 inch heavy duty forged steel workbench vise\u003c\/a\u003e (TCAV4)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/side-shelf-for-vice\"\u003eRoller cabinet side shelf made to fit the TCAV4 4 inch vise\u003c\/a\u003e (TCATV)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/polyurethane-dead-blow-hammer\"\u003eSteel ball dead blow hammer with polyurethane head and textured grip\u003c\/a\u003e (HMDH50PU)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/soft-face-hammer\"\u003eSoft face hammer with replaceable plastic tips, round head\u003c\/a\u003e (HMSF)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748493607255,"sku":"BDL-4-BENCH-VISE-ROLLER","price":389.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_a413dc9a-f72d-4b9a-be5b-7961ba6b68ea.jpg?v=1794139547"},{"product_id":"welding-fabrication-student-tool-kit-14-piece","title":"Teng Tools Welding and Fabrication Student Tool Kit, 14 Pieces: C-Clamp and Locking Pliers, Hammer, Chisel, Punch, Files, Snips, Rule, Knife","description":"\u003cp\u003eThe hand tools a welding and fabrication program asks a student to bring, in one order. Two swivel C-clamp locking pliers, a curved jaw locking plier and a two-piece locking plier set, an engineers hammer, a cold chisel, a center punch, two files, aviation snips, a steel rule, a folding knife and an adjustable wrench.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/swivel-c-clamp-power-grip-plier\"\u003eSwivel C-clamp locking pliers, 172 mm (6-3\/4 in) and 280 mm (11 in)\u003c\/a\u003e (406-6P, 406P)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/curved-jaw-power-grip-plier\"\u003eCurved jaw locking plier, 300 mm (12 in)\u003c\/a\u003e (401-12)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/power-grip-plier-set-155-250mm\"\u003e2 piece locking plier set: long nose and curved jaw\u003c\/a\u003e (402)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/engineers-hammer\"\u003eEngineers hammer, 500 g (1.1 lb)\u003c\/a\u003e (HMEG500)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-cold-chisel-200-x-25mm\"\u003eFlat cold chisel, 25 mm wide, 200 mm (7.9 inch) long\u003c\/a\u003e (CC200F)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/centre-punch\"\u003eCenter punch, 5 mm\u003c\/a\u003e (CP05)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hand-file-250mm-flat\"\u003e10 inch (250 mm) flat second cut hand file\u003c\/a\u003e (FLFT10)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hand-file-250mm-half-round\"\u003e250 mm (10 inch) half round hand file\u003c\/a\u003e (FLHR10)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/tin-snip-right-straight\"\u003e250 mm CrMo aviation snips, right and straight cut\u003c\/a\u003e (491)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/steel-rule-mm-af-200mm\"\u003eStainless steel rule, 200 mm (7.9 inch)\u003c\/a\u003e (ST200)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/folding-utility-knife\"\u003e19 mm folding utility knife\u003c\/a\u003e (712)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/adjustable-wrench\"\u003eAdjustable wrench, 200 mm (8 inch)\u003c\/a\u003e (4003)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748493738327,"sku":"BDL-WELDING-FABRICATION","price":226.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_302576f2-a23d-4b89-9edb-e45517070790.jpg?v=1794133363"},{"product_id":"seized-fastener-removal-kit-25-piece","title":"Teng Tools Seized Fastener Removal Kit, 25 Pieces: Manual Impact Driver Set, Screw Extractors, Nut Splitters, Stud Extractor, Strike Cap Screwdrivers","description":"\u003cp\u003eRusted and stripped hardware comes off in steps: shock it, extract it, split it, pull the stud. This kit has a tool for each step: a 15-piece 1\/2 inch manual impact driver set, a 5-piece screw extractor kit, a 2-piece nut splitter set, an eccentric stud extractor and two strike cap screwdrivers.\u003c\/p\u003e\u003cp\u003eThe manual impact driver and the strike cap screwdrivers need a hammer. Bring a 1\/4 inch hex driver for the screw extractors, a 1\/2 inch drive ratchet or breaker bar for the stud extractor, and a wrench or socket to turn the nut splitter screws. None of these are in the kit.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-5-16-impact-driver-set-15-pieces\"\u003e15 piece 1\/2 inch manual impact driver set with hex, Phillips and flat bits and adaptor\u003c\/a\u003e (ID515)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-hex-bolt-and-nut-extractor-set-cr-mo-8-13-mm-5-pieces\"\u003e5 piece CrMo screw extractor kit, 8 and 10 to 13 mm, 1\/4 inch hex drive\u003c\/a\u003e (TJEP05)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/nut-splitter-set-2-pieces-5-20mm-14-27mm\"\u003e2 piece nut splitter set for seized, rusted and stripped nuts\u003c\/a\u003e (NS02)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-stud-extractor-eccentric\"\u003e1\/2 inch drive eccentric stud extractor with knurled wheel grip\u003c\/a\u003e (2300)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-power-through-screwdriver\"\u003eFlat power through screwdriver with strike cap\u003c\/a\u003e (MDT932N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ph-power-through-screwdriver-ph2\"\u003ePH2 Phillips power through screwdriver with strike cap, 216 mm overall\u003c\/a\u003e (MDT952N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748494557527,"sku":"BDL-SEIZED-FASTENER-IMPACT","price":138.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_0082c216-9e5d-467c-be37-2c1011e7a989.jpg?v=1794137008"},{"product_id":"seized-fastener-removal-kit-20-piece","title":"Teng Tools Seized Fastener Removal Kit, 20 Pieces: Manual Impact Driver Set, Extractors, Nut Splitters, Strike-Through Screwdrivers, Hammer, Pliers","description":"\u003cp\u003eRusted, rounded and stripped fasteners, in one order. This kit has a 7-piece 1\/4 inch manual impact driver set with screw extractors, a 5-piece 8 and 10 to 13 mm bolt and nut extractor kit, two nut splitters, three strike-through screwdrivers, a 16 oz ball pein hammer, 300 mm locking pliers and a 6 mm pin punch.\u003c\/p\u003e\u003cp\u003eThe nut splitters are turned with a wrench or a socket and ratchet on their hex heads, which this kit does not include.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-impact-driver-set-7-pieces\"\u003e7 piece 1\/4 inch manual impact driver set with flat and Phillips bits and screw extractors\u003c\/a\u003e (IDSE7)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-hex-bolt-and-nut-extractor-set-cr-mo-8-13-mm-5-pieces\"\u003e5 piece CrMo hex bolt and nut extractor kit, 1\/4 inch hex drive, with case\u003c\/a\u003e (TJEP05)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/nut-splitter-set-2-pieces-5-20mm-14-27mm\"\u003e2 piece nut splitter set for seized, rusted and stripped nuts, 5 to 27 mm\u003c\/a\u003e (NS02)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ph-power-through-screwdriver-ph2\"\u003ePH2 Phillips strike-through screwdriver, 216 mm (8.5 in)\u003c\/a\u003e (MDT952N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ph-power-through-screwdriver-ph3\"\u003ePH3 Phillips strike-through screwdriver, 275 mm (10.8 in)\u003c\/a\u003e (MDT953N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-power-through-screwdriver\"\u003eFlat tip strike-through screwdriver with strike cap\u003c\/a\u003e (MDT934N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ball-pein-hammer\"\u003eBall pein hammer with fiberglass shaft and rubber type handle\u003c\/a\u003e (HMBP16)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/curved-jaw-power-grip-plier\"\u003eCurved jaw locking pliers, 300 mm (12 in)\u003c\/a\u003e (401-12)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/parallel-pin-punch\"\u003eParallel pin punch, 6 mm\u003c\/a\u003e (PP06)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748495442263,"sku":"BDL-SEIZED-FASTENER-MANUAL","price":154.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_848a3db5-1ef1-40a8-8c06-2cde0d72dfb2.jpg?v=1794133589"},{"product_id":"control-panel-hand-tool-kit-28-piece","title":"Teng Tools Control Panel Hand Tool Kit, 28 Pieces: Nut Drivers 5 to 8 and 10 to 13 mm, Screwdrivers, Hex Keys 1.5 to 7 and 10 mm, Strippers, Pliers","description":"\u003cp\u003eMetric hand tools for wiring a control panel, in one order. Nine nut drivers, 5 to 8 and 10 to 13 mm, six slotted, Phillips and Pozidriv screwdrivers, a plus minus insulated screwdriver, nine ball point hex keys, wire strippers, side cutting pliers and flat nose pliers.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/nut-driver-set-ttx4-9-pieces\"\u003e9 piece metric nut driver set, 5 to 8 and 10 to 13 mm, in TTX tray\u003c\/a\u003e (TTXND)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-6-pieces\"\u003e6 piece mixed screwdriver set: flat, Phillips and Pozidriv, in tray\u003c\/a\u003e (MD906N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/plus-minus-insulated-screwdriver-ph2\"\u003e100 mm plus minus insulated screwdriver\u003c\/a\u003e (MDV844NF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ball-point-hex-key-set-a-9-pieces\"\u003e9 piece metric ball point hex key set, 1.5 to 7 and 10 mm, in folding holder\u003c\/a\u003e (1479MMA)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/wire-stripping-plier-with-tpr-grip\"\u003e178 mm (7 in) wire strippers with TPR grip\u003c\/a\u003e (MB499-7T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/side-cutting-plier-tpr-grip\"\u003e160 mm (6.3 in) side cutting pliers with TPR grip\u003c\/a\u003e (MB441-6T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-nose-plier-tpr-grip-170mm\"\u003e170 mm (6.7 in) flat nose pliers with TPR grip\u003c\/a\u003e (MB464-6T)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748495966551,"sku":"BDL-CONTROL-PANEL-BUILD-NUT","price":197.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_28fe9792-0d26-4675-9416-1ce7e0dde49a.jpg?v=1794133677"},{"product_id":"structural-bolting-kit-3-piece","title":"Teng Tools Structural Bolting Kit, 3 Pieces: 19 x 22 mm (3\/4 x 7\/8 Inch) Ratcheting Spud Wrench, 500 mm (20 in) Roll Heel Pry Bar, 1250 g Lump Hammer","description":"\u003cp\u003eThree tools for lining up holes and running bolts on scaffold, racking and structural steel. A double ended 19 x 22 mm (3\/4 x 7\/8 inch) ratcheting spud wrench, a 500 mm (20 in) roll heel pry bar and a 1250 g lump hammer.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratcheting-construction-wrench-19-x-22mm\"\u003e19 x 22 mm (3\/4 x 7\/8 inch) double ended ratcheting spud wrench\u003c\/a\u003e (PGW1922)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/roll-heel-pry-bar\"\u003e500 mm (20 in) roll heel pry bar with tapered podger handle\u003c\/a\u003e (PB20)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/lump-hammer-1250g\"\u003e1250 g lump hammer with round face\u003c\/a\u003e (HMS1250)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748496294231,"sku":"BDL-STEEL-ERECTION-BELT-34","price":126.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_ecab22b9-9bcf-4d7a-a1a2-e6b606f28ad2.jpg?v=1794133546"},{"product_id":"control-panel-wiring-kit-8-piece","title":"Teng Tools Control Panel Wiring Kit, 8 Pieces: Ratcheting Crimper, 24 to 10 AWG Wire Stripper, Side Cutter, Flat Nose Pliers, Four Screwdrivers","description":"\u003cp\u003eStrip, crimp, cut, form and drive screws on control wiring from one order. The kit has a ratcheting crimping plier with three interchangeable heads, an automatic stripper for 24 to 10 AWG wire, a 135 mm (5.3 in) side cutter, a 170 mm (6.7 in) flat nose plier and four screwdrivers: slotted 2.5 and 3.5 mm, PH1 and PZ2.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratcheting-crimping-plier-with-interchangeable-heads\"\u003eRatcheting crimping plier with three interchangeable heads\u003c\/a\u003e (CP52)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/gun-type-wire-stripping-plier\"\u003eAutomatic gun type wire stripping plier, 24 to 10 AWG\u003c\/a\u003e (CP55)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/side-cutting-plier\"\u003eCrMo side cutting plier\u003c\/a\u003e (MB441-5)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-nose-plier-tpr-grip-170mm\"\u003e170 mm (6.7 in) CrMo flat nose plier with TPR grip\u003c\/a\u003e (MB464-6T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-head-screwdriver\"\u003eSlotted screwdrivers\u003c\/a\u003e: 2.5 x 75 mm (3 in), 3.5 x 75 mm (3 in) (MD915N, MD916N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/phillips-screwdriver\"\u003ePhillips screwdriver\u003c\/a\u003e (MD947N1)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/pozidriv-screwdriver\"\u003ePozidriv screwdriver\u003c\/a\u003e (MD962N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748496720215,"sku":"BDL-CONTROL-PANEL-WIRING","price":143.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_c463c6f1-cb44-4415-8a4e-717bbf76a385.jpg?v=1794135598"},{"product_id":"torx-bit-and-e-torx-socket-kit-37-piece","title":"Teng Tools Torx Bit and E-Torx Socket Kit, 37 Pieces: TX10 to TX60 Bit Sockets and E-Torx Sockets on 1\/4, 3\/8 and 1\/2 Inch Drive","description":"\u003cp\u003eTorx screws and E-Torx external fasteners call for two different kinds of socket. This kit has both on four clip rails: 18 Torx bit sockets from TX10 to TX60 on 3\/8 and 1\/2 inch drive, and 19 E-Torx sockets from E4 to E24 on 1\/4, 3\/8 and 1\/2 inch drive.\u003c\/p\u003e\u003cp\u003eEvery socket in this kit needs a ratchet or handle of its own drive size (1\/4, 3\/8 or 1\/2 inch), which this kit does not include.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-tx-bit-socket-clip-rail-set-9-pieces\"\u003e1\/2 inch drive Torx bit socket set with S2 steel bits on a clip rail\u003c\/a\u003e (M1213TX)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-8-tx-bit-socket-clip-rail-set-9-pieces\"\u003e3\/8 inch drive Torx bit socket set with S2 steel bits on a clip rail\u003c\/a\u003e (M3813TX)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-tx-e-socket-clip-rail-set-9-pieces\"\u003e1\/2 inch drive E-Torx external star socket set on a clip rail\u003c\/a\u003e (M1210)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-4-3-8-tx-e-socket-clip-rail-set-10-pieces\"\u003e10 piece 1\/4 and 3\/8 inch drive E-Torx external star socket set on a clip rail\u003c\/a\u003e (M3814)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748496851287,"sku":"BDL-EUROPEAN-FASTENER-TORX-E","price":119.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_a0456c1d-d63b-4040-8332-907bd21217ba.jpg?v=1794135753"},{"product_id":"high-leverage-sheet-metal-snip-set-3-piece","title":"Teng Tools High Leverage Sheet Metal Snip Set, 3 Pieces: Straight, Left and Straight, Straight and Right Cut Snips","description":"\u003cp\u003eFor cutting sheet metal in straight lines and curves to the left or right: three high leverage snips, each with CrMo steel jaws, so every cut direction has its own pair of jaws. The straight cut and straight and right snips are 250 mm (10 inch).\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/tin-snip-high-leverage-straight\"\u003e250 mm (10 inch) high leverage straight cut tin snips, CrMo steel jaws\u003c\/a\u003e (490W)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/tin-snip-high-leverage-right-straight\"\u003e250 mm (10 inch) high leverage straight and right cut metal snips, CrMo steel jaws\u003c\/a\u003e (491W)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/tin-snip-high-leverage-left-straight\"\u003eHigh leverage left and straight cut tin snips, CrMo steel jaws\u003c\/a\u003e (492W)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748497015127,"sku":"BDL-AVIATION-SNIPS-250-HIGH","price":69.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_59f0f84e-5f7e-451c-b8c3-577c485461ce.jpg?v=1794135649"},{"product_id":"1-3-torque-multiplier-kit-5-piece","title":"Teng Tools 1:3 Torque Multiplier Kit, 5 Pieces: 25 to 250 ft-lb Torque Wrench, Step-Up Adapter, 1 Inch Drive 32 and 33 mm Deep Impact Sockets","description":"\u003cp\u003eFor fasteners tightened past 250 ft-lb, the top of the 1\/2 inch drive torque wrench's range in this kit. A 1:3 torque multiplier driven by a 1\/2 inch drive torque wrench, so the figure set on the wrench is tripled at the output. A 3\/4 inch female to 1 inch male step-up adapter carries the output to two 1 inch drive deep impact sockets, 32 and 33 mm.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/torque-multiplier-1-3-f-3-4-m\"\u003eTorque multiplier that triples input torque, 1\/2 inch input, 3\/4 inch output\u003c\/a\u003e (MP1400)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-1-2-torque-wrench-25-250-ft-lb-1292uag-e4\"\u003e1\/2 inch drive torque wrench, adjustable 25 to 250 ft-lb\u003c\/a\u003e (1292UAG-E4)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/socket-step-up-adapter\"\u003eSocket step-up adapter\u003c\/a\u003e (M340085-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-deep-impact-socket-metric\"\u003e1 inch drive metric deep impact sockets\u003c\/a\u003e: 32 mm, 33 mm (910632R, 910633R)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748497113431,"sku":"BDL-TRUCK-WHEEL-TORQUE-1-3","price":585.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_7f92300d-d8b5-4b69-a4f3-cb5260ae58ef.jpg?v=1794139545"},{"product_id":"metric-light-mechanics-tool-kit-67-piece","title":"Teng Tools Metric Light Mechanic's Tool Kit, 67 Pieces: 3\/8 Inch Drive Regular and Deep Sockets, Wrenches 8 to 19 mm, Pliers, Screwdrivers, Hex Keys","description":"\u003cp\u003eFor day to day metric maintenance on vehicles and equipment: a 3\/8 inch drive socket kit with the wrenches and hand tools that go with it. It has a 19 piece set with a 72-tooth ratchet, extension and universal joint, a 16 piece set of deep sockets, 12 combination wrenches from 8 to 19 mm, a 7 piece screwdriver set, 3 pliers and 10 hex keys.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-8-socket-set-6-pt-tt1-19-pieces\"\u003e19 piece 3\/8 inch drive metric 6 point socket set with 72-tooth ratchet, extension and universal joint\u003c\/a\u003e (TT3819)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-8-socket-set-6-pt-tt1-16-pieces\"\u003e16 piece 3\/8 inch drive 6 point deep metric socket set, 7 to 22 mm\u003c\/a\u003e (TT3816)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-12-piece-metric-combination-wrench-set-8-19mm-tt1236\"\u003e12 piece metric combination wrench set, 8 to 19 mm\u003c\/a\u003e (TT1236)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/screwdriver-set-mixed-tt1-7-pieces\"\u003e7 piece flat, Phillips and Pozi screwdriver set\u003c\/a\u003e (TT917N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/vinyl-grip-plier-set-tt1-3-pieces\"\u003e3 piece vinyl grip pliers set: side cutting, combination, long nose\u003c\/a\u003e (TTMB03)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/hex-key-set-10-pieces\"\u003e10 piece metric hex key set, 1.5 to 8 and 10 mm\u003c\/a\u003e (1425)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748497310039,"sku":"BDL-LIGHT-MECHANIC-S-38","price":285.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_84a4965f-5124-44b0-9064-16809c85ade9.jpg?v=1794137058"},{"product_id":"1000-v-insulated-socket-plier-kit-28-piece","title":"Teng Tools 1000 V Insulated Socket and Plier Kit, 28 Pieces: 3\/8 Inch Drive Sockets 6 to 20 mm, 4 Pliers, 6 Screwdrivers","description":"\u003cp\u003eThree insulated Teng Tools sets in one order, for live electrical work up to 1000 V. An 18-piece 3\/8 inch drive socket set with sockets from 6 to 20 mm, a 4-piece set of 1000 V pliers and a 6-piece set of 1000 V screwdrivers.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-8-insulated-socket-set-foam2-18-pieces\"\u003e18 piece 3\/8 inch drive insulated socket set, 6 to 20 mm, with extension bars\u003c\/a\u003e (TEDV3818)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-plier-set-tt1-4-pieces\"\u003e4 piece 1000 V insulated plier set: side cutting, combination, long nose, wire stripping\u003c\/a\u003e (TTV440)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-screwdriver-set-mixed-tt1-6-pieces\"\u003e6 piece 1000 V VDE screwdriver set with Phillips, Pozi and flat tips\u003c\/a\u003e (TTV706N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748497572183,"sku":"BDL-EV-BAY-INSULATED-1000-V","price":369.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_439cc2ac-ee05-4ccf-b17f-9a94f7c7a062.jpg?v=1794139596"},{"product_id":"large-metric-hex-key-set-10-12-14-17-19-22-mm-6-piece","title":"Teng Tools Large Metric Hex Key Set 10, 12, 14, 17, 19 and 22 mm, 6 Pieces: Chrome Vanadium, Black Phosphate, Ground Ends, DIN 2936","description":"\u003cp\u003eSix large metric hex keys, 10, 12, 14, 17, 19 and 22 mm, for large internal hex plugs and cap screws. Chrome vanadium, black phosphate finish, ground ends, DIN 2936.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/es\/products\/metric-hex-key\"\u003eMetric hex keys\u003c\/a\u003e: 10 mm, 12 mm, 14 mm, 17 mm, 19 mm, 22 mm (310510, 310512, 310514, 310517, 310519, 310522)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748497768791,"sku":"BDL-LARGE-HEX-KEY-L-KEYS-10","price":80.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_a6a65b7c-452b-42d9-9ca5-b774b027a0f8.jpg?v=1794136989"},{"product_id":"insulated-electrical-terminal-tool-kit-10-piece","title":"Teng Tools Insulated Electrical Terminal Tool Kit, 10 Pieces: 3\/8 Inch Drive Ratchet, Extension, 8, 10, 11 and 13 mm Sockets, Screwdrivers, Pliers","description":"\u003cp\u003eInsulated hand tools for electrical terminal work, in one order. This kit has a 3\/8 inch drive insulated ratchet approved for live working up to 1,000 V, an insulated extension, four VDE insulated sockets, two insulated screwdrivers and two pairs of insulated pliers.\u003c\/p\u003e\u003cp\u003eThe sockets are 8, 10, 11 and 13 mm only. The kit has no uninsulated tools and no other socket sizes.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-8-insulated-ratchet-72-teeth\"\u003e3\/8 inch drive insulated ratchet, 72 tooth, twist reverse, VDE, up to 1,000 V\u003c\/a\u003e (MV3800)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-extension-bar\"\u003e3\/8 inch drive insulated extension bar, 150 mm (5.9 in)\u003c\/a\u003e (MV380021)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-socket\"\u003eFour 3\/8 inch drive VDE insulated hex sockets, 1000 V\u003c\/a\u003e: 8 mm, 10 mm, 11 mm, 13 mm (MV380508, MV380510, MV380511, MV380513)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ph-insulated-screwdriver-ph2\"\u003ePhillips insulated screwdriver, 100 mm (3.9 in) blade\u003c\/a\u003e (MDV844N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-insulated-screwdriver\"\u003e4.0 mm flat insulated screwdriver, VDE 1000 V\u003c\/a\u003e (MDV824N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-side-cutting-plier\"\u003e160 mm (6.3 in) VDE insulated side cutting pliers\u003c\/a\u003e (MBV441-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/insulated-combination-plier\"\u003e200 mm (7.9 in) VDE insulated combination pliers\u003c\/a\u003e (MBV451-8)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748498030935,"sku":"BDL-1000-V-INSULATED-UPS","price":210.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_c0ecc824-0d1c-4e97-9ed1-acd4bb0b072f.jpg?v=1794134438"},{"product_id":"outboard-gearcase-removal-kit-15-piece","title":"Teng Tools Outboard Gearcase Removal Kit, 15 Pieces: 1\/2 Inch Drive Deep Impact Sockets 11 to 19 mm, Ratchet, Extensions, Dead Blow Hammer","description":"\u003cp\u003eThe tools for dropping and refitting an outboard gearcase in one order. Nine 1\/2 inch drive deep impact sockets cover every size from 11 to 19 mm, with a 45 tooth ratchet, a wobble extension and a 255 mm (10 inch) extension, a 65 mm dead blow hammer, a gasket scraper and a 10 mm wide flat screwdriver.\u003c\/p\u003e\u003cp\u003eGear lube and replacement gaskets are not included.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/ratchet-frp-45-teeth\"\u003e45 tooth 1\/2 inch drive ratchet handle\u003c\/a\u003e (1200FRP)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-wobble-extension-bar\"\u003e1\/2 inch drive wobble extension bar\u003c\/a\u003e (M120021W-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-extension-bar\"\u003e1\/2 inch drive extension bar\u003c\/a\u003e (M120022-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-6-point-metric-din-deep-impact-socket\"\u003e1\/2 inch drive 6 point metric deep impact sockets\u003c\/a\u003e: 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 18 mm, 19 mm (920611N, 920612N, 920613N, 920614N, 920615N, 920618N, 920619N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-2-drive-deep-impact-socket-ansi-metric\"\u003e1\/2 inch drive metric deep impact sockets, 16 and 17 mm\u003c\/a\u003e (920616AN, 920617AN)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/dead-blow-hammer\"\u003eDead blow hammer, no-bounce soft blow\u003c\/a\u003e (HMDH65)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/gasket-scraper-22mm\"\u003e22 mm gasket scraper with bi-material handle\u003c\/a\u003e (MD-SCR)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/flat-head-screwdriver\"\u003eFlat head screwdriver, slotted tip\u003c\/a\u003e (MD935N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748498227543,"sku":"BDL-OUTBOARD-GEARCASE","price":199.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_30b80e9a-e2f5-4ba9-b0dd-1300268b5966.jpg?v=1794133609"},{"product_id":"3-4-inch-drive-ratchet-torque-wrench-kit-6-piece","title":"Teng Tools 3\/4 Inch Drive Ratchet and Torque Wrench Kit, 6 Pieces: 72-Tooth Ratchet, Extension Bars, T-Bar, 50 to 300 ft-lb Torque Wrench, Adaptor","description":"\u003cp\u003eA 3\/4 inch drive ratchet and torque wrench together, for large nuts and bolts. A 72-tooth ratchet with 200 and 400 mm extension bars and a sliding T-bar, an adjustable 50 to 300 ft-lb torque wrench, and an adaptor from 3\/4 inch female to 1\/2 inch male drive.\u003c\/p\u003e\u003cp\u003eThis kit has no sockets. Bring 3\/4 inch drive sockets, or 1\/2 inch drive sockets through the included adaptor.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-drive-ratchet-accessories-set-ttx4-4-pieces\"\u003e4 piece 3\/4 inch drive ratchet set: 72-tooth ratchet, two extension bars, sliding T-bar\u003c\/a\u003e (TTX3404)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-3-4-torque-wrench-50-300-ft-lb-3492uag-e\"\u003e3\/4 inch drive adjustable torque wrench, 50 to 300 ft-lb\u003c\/a\u003e (3492UAG-E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/impact-reducing-adaptor-3-4f-1-2m-din\"\u003e3\/4 inch female to 1\/2 inch male impact adaptor, chrome molybdenum\u003c\/a\u003e (940037-C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748498391383,"sku":"BDL-34-DIESEL-LAB-STATION","price":395.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_20eb3c62-52c1-4b87-a170-cc1bc55a928e.jpg?v=1794140821"},{"product_id":"1-inch-drive-deep-impact-socket-ratchet-kit-7-piece","title":"Teng Tools 1 Inch Drive Deep Impact Socket and Ratchet Kit, 7 Pieces: 27, 30, 32 and 33 mm Sockets, Ratchet Head, 22 Inch Power Bar, 200 mm Extension","description":"\u003cp\u003eBig fasteners call for a 1 inch drive set with its own handle. This kit has four metric deep impact sockets, a 24-tooth ratchet head, a 22 inch power bar that the ratchet head fits, and a 200 mm extension bar.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-deep-impact-socket-metric\"\u003e1 inch drive metric deep impact sockets\u003c\/a\u003e: 27 mm, 30 mm, 32 mm, 33 mm (910627R, 910630R, 910632R, 910633R)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-inch-drive-ratchet-head-24-teeth\"\u003e1 inch drive ratchet head, 24 tooth\u003c\/a\u003e (M110010)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-inch-drive-power-bar-560mm\"\u003e1 inch drive heavy duty power bar, 22 inch\u003c\/a\u003e (M110020)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/1-extension-bar\"\u003e1 inch drive extension bar, 200 mm (7.9 inch)\u003c\/a\u003e (M110040)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748498653527,"sku":"BDL-1-TRACK-BOLT-27-33-DEEP","price":354.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_997b99ec-c387-42bf-b869-f1ce6f602936.jpg?v=1794140847"},{"product_id":"3-4-inch-drive-torque-wrench-breaker-bar-metric-socket-kit-16-piece","title":"Teng Tools 3\/4 Inch Drive Torque Wrench, Breaker Bar and Metric Socket Kit, 16 Pieces: 50 to 300 ft-lb Wrench, 10 Six Point Sockets, Ratchet Set","description":"\u003cp\u003eLarge metric fasteners need a wrench you set to a figure and sockets that fit the head. This 3\/4 inch drive kit puts an adjustable 50 to 300 ft-lb torque wrench together with 10 six point metric sockets, a 72-tooth ratchet with two extension bars and a sliding T bar, and a 19 inch breaker bar.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-3-4-torque-wrench-50-300-ft-lb-3492uag-e\"\u003e3\/4 inch drive adjustable torque wrench, 50 to 300 ft-lb\u003c\/a\u003e (3492UAG-E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-flex-handle-480mm\"\u003e3\/4 inch drive flex handle breaker bar with articulated head\u003c\/a\u003e (M340070-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-socket-set-6-pt-foamx4-10-pieces\"\u003e10 piece 3\/4 inch drive 6 point metric socket set\u003c\/a\u003e (TEX3410)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-drive-ratchet-accessories-set-ttx4-4-pieces\"\u003e4 piece 3\/4 inch drive ratchet set: ratchet, two extension bars, sliding T bar\u003c\/a\u003e (TTX3404)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748499145047,"sku":"BDL-34-TORQUE-50-300-FT-LB","price":554.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_2f0bca7a-1585-4a25-8c68-558515e2817b.jpg?v=1794140859"},{"product_id":"3-4-inch-drive-sae-torque-wrench-breaker-bar-kit-20-piece","title":"Teng Tools 3\/4 Inch Drive SAE Torque Wrench and Breaker Bar Kit, 20 Pieces: 50 to 300 ft-lb Wrench, 14 Twelve Point Sockets, Ratchet Set","description":"\u003cp\u003eLarge SAE fasteners need a wrench that reads a figure and sockets that fit the head. This 3\/4 inch drive kit puts an adjustable 50 to 300 ft-lb torque wrench together with 14 twelve point SAE sockets, a 72-tooth ratchet with two extension bars and a sliding T bar, and a 19 inch breaker bar.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/teng-tools-3-4-torque-wrench-50-300-ft-lb-3492uag-e\"\u003e3\/4 inch drive adjustable torque wrench, 50 to 300 ft-lb\u003c\/a\u003e (3492UAG-E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-flex-handle-480mm\"\u003e3\/4 inch drive flex handle breaker bar with articulated head\u003c\/a\u003e (M340070-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-drive-12-point-af-socket-set-ttx4-14-pieces\"\u003e14 piece 3\/4 inch drive 12 point SAE socket set\u003c\/a\u003e (TTX34AF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/es\/products\/3-4-drive-ratchet-accessories-set-ttx4-4-pieces\"\u003e4 piece 3\/4 inch drive ratchet set: ratchet, two extension bars, sliding T bar\u003c\/a\u003e (TTX3404)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55748499341655,"sku":"BDL-34-SAE-TORQUE-50-300--2","price":564.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_2b6defc0-6691-45fd-8a7d-905baf522c2e.jpg?v=1794139585"}],"url":"https:\/\/tengtoolsusa.com\/es\/collections\/trade-tool-kits.oembed?page=5","provider":"Teng Tools USA","version":"1.0","type":"link"}