{"title":"Millwright and Industrial Maintenance Tool Kits","description":"\u003cp\u003eKits for millwrights and plant mechanics: bearings, couplings, alignment, conveyors and gearboxes in one order.\u003c\/p\u003e","products":[{"product_id":"pump-and-motor-alignment-kit-19-piece","title":"Teng Tools Pump and Motor Alignment Kit, 19 Pieces: Magnetic Dial Indicator, Feeler Gauge, Caliper, Five 1\/2 Inch Drive Sockets, Hex Keys, Pry Bar","description":"\u003cp\u003eThe tools for the measure, loosen, move, shim, tighten, measure loop on a pump and motor. A 0 to 10 mm magnetic dial indicator, a 4 piece measuring set with feeler gauge and digital caliper, a 1\/2 inch drive long arm ratchet with five sockets, 7 folding hex keys and a 450 mm pry bar.\u003c\/p\u003e\u003cp\u003eBring shim stock for the motor feet. Check the motor drawing for the hold-down bolt size, as the five sockets are 1\/2, 9\/16, 3\/4, 15\/16 and 1-1\/8 inch. Coupling set screw sizes vary by coupling maker, and the hex keys run 1\/16 to 7\/32 inch.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/dial-gauge-with-magnetic-stand-0-25mm\"\u003eMagnetic dial indicator, 0 to 10 mm, 57 mm dial\u003c\/a\u003e (DGMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/measuring-tool-set-tt2-4-pieces\"\u003e4 piece measuring set in a TT2 tray: digital caliper, digital multimeter, feeler gauge, thread gauge\u003c\/a\u003e (TTDCM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ratchet-long-arm\"\u003e1\/2 inch drive long arm ratchet, twist reverse\u003c\/a\u003e (1200L)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-2-drive-12-point-sae-socket\"\u003e1\/2 inch drive 12 point SAE shallow sockets for hold-down bolts\u003c\/a\u003e: 1\/2\", 9\/16\", 3\/4\", 15\/16\", 1-1\/8\" (M120116-C, M120118-C, M120124-C, M120130-C, M120136-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/folding-hex-key-set-af-alu-7-pieces\"\u003e7 piece SAE folding hex key set, 1\/16 to 7\/32 inch\u003c\/a\u003e (1476NAF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/pry-bar-450mm\"\u003e450 mm (17.7 in) pry bar\u003c\/a\u003e (PB18A)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791599812951,"sku":"BDL-PUMP-AND-MOTOR-ALIGNMENT","price":354.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_3a159c76-a4a6-4b2f-a979-59cb1508e2e5.jpg?v=1794318110"},{"product_id":"iec-motor-mounting-kit-14-piece","title":"Teng Tools IEC Motor Mounting Kit, 14 Pieces: 1\/2 Inch Drive Long Ratchet, Metric Sockets and Wrenches 16, 17, 18, 19, 24 and 30 mm, Pry Bar","description":"\u003cp\u003eFor pulling and refitting an IEC frame motor on its base or gearbox flange. A 1\/2 inch drive long arm ratchet, six 12 point sockets, a wrench to match each socket size, and a 450 mm (17.7 inch) pry bar to slide the motor into line.\u003c\/p\u003e\u003cp\u003eCovers M10, M12, M16 and M20 bolts, with ISO and DIN head sizes for M10 and M12. M8 bolts on frame 80 and 90 motors, M24 bolts on frame 315 motors, a torque wrench and lifting gear are not included.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ratchet-long-arm\"\u003e1\/2 inch drive long arm ratchet, twist reverse\u003c\/a\u003e (1200L)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-2-drive-12-point-metric-socket\"\u003e1\/2 inch drive 12 point metric shallow sockets\u003c\/a\u003e: 16 mm, 17 mm, 18 mm, 19 mm, 24 mm, 30 mm (M120516-C, M120517-C, M120518-C, M120519-C, M120524-C, M120530-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/metric-combination-wrench\"\u003eMetric combination wrenches, ring and open end\u003c\/a\u003e: 16 mm, 17 mm, 18 mm, 19 mm, 30 mm (600516, 600517, 600518, 600519, 600530)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/72-tooth-ratcheting-combination-spanner-metric\"\u003e24 mm ratcheting combination wrench\u003c\/a\u003e (600524R)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/pry-bar-450mm\"\u003e450 mm (17.7 in) pry bar\u003c\/a\u003e (PB18A)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791600337239,"sku":"BDL-IEC-MOTOR-MOUNTING-KIT","price":178.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_5405abe7-ff47-4c99-bc77-0d8d96d86f3e.jpg?v=1794318109"},{"product_id":"metric-pump-and-frame-torque-kit-45-piece","title":"Teng Tools Metric Pump and Frame Torque Kit, 45 Pieces: 3\/8 Inch Sockets 8 to 19 and 22 mm, Hex Bit Sockets 6, 8 and 10 mm, 20 to 110 Nm Wrench","description":"\u003cp\u003eFrame and pump bolting is two steps, run the fasteners down, then torque them. This kit has both on one 3\/8 inch drive: a 19-piece metric socket set with a 72-tooth ratchet, 6, 8 and 10 mm hex bit sockets with a step-up adaptor, and a 22-piece click torque wrench kit reading 20 to 110 Nm.\u003c\/p\u003e\u003cp\u003eTorque to the equipment maker's value. Stainless screws in small sizes often call for less than 20 Nm, which is below this wrench's range. Fasteners outside the socket and hex bit sizes in this kit are not covered.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-8-torque-wrench-set-20-110-nm-ttx4-22-pieces\"\u003e22 piece 3\/8 inch drive click torque wrench kit, 20 to 110 Nm, with crow foot wrenches, TX bits and extensions in a TTX4 tray\u003c\/a\u003e (TTX3892)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-8-socket-set-12-pt-tt1-19-pieces\"\u003e19 piece 3\/8 inch drive 12 point metric socket set with 72-tooth ratchet, wobble extension, universal joint and TT1 tray\u003c\/a\u003e (TT381912)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/impact-step-up-adaptor-3-8f-1-2m-din\"\u003e3\/8 inch female to 1\/2 inch male impact step-up adaptor\u003c\/a\u003e (980036-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-2-drive-hex-bit-socket-metric\"\u003e1\/2 inch drive metric hex bit socket\u003c\/a\u003e: 6 mm, 8 mm, 10 mm (M121506-C, M121508-C, M121510-C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791604040023,"sku":"BDL-METRIC-PUMP-AND-FRAME","price":258.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_bf9eb61c-245c-464e-b297-036dd719bae9.jpg?v=1794320497"},{"product_id":"bearing-and-gear-circlip-plier-kit-12-piece","title":"Teng Tools Bearing and Gear Circlip Plier Kit, 12 Pieces: Internal and External, Straight and Bent, 12 to 100 mm in Three Tray Sets","description":"\u003cp\u003eRetaining ring sizes on a plant floor run from small sensor shafts to 100 mm gearbox shafts, and one plier cannot span that. This kit has three 4 piece circlip plier sets for 12 to 25 mm, 19 to 60 mm and 40 to 100 mm, each with internal and external pliers in straight and bent tips.\u003c\/p\u003e\u003cp\u003eRetaining rings are not included.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-set-12-25mm-tt1-4-pieces\"\u003e4 piece snap ring pliers set, 12 to 25 mm, internal and external, straight and bent tips, on a TT1 tray\u003c\/a\u003e (TT474-5)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-set-pro-19-60mm-tt1-4-pieces\"\u003e4 piece PRO snap ring pliers set, 19 to 60 mm, internal and external, straight and bent tips, in a tray\u003c\/a\u003e (TT474-7E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-set-40-100-mm-ttx4-4-pieces\"\u003e4 piece circlip pliers set, 40 to 100 mm, internal and external, straight and bent tips, in a TTX4 tray\u003c\/a\u003e (TTX474-9)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791617966423,"sku":"BDL-BEARING-AND-GEAR-CIRCLIP","price":249.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_bacc9c39-9130-46a9-b59a-f74fda165e87.jpg?v=1794320495"},{"product_id":"sae-pillow-block-bearing-change-kit-16-piece","title":"Teng Tools SAE Pillow Block Bearing Change Kit, 16 Pieces: 1\/2 Inch Drive Sockets and Ratchet, Hex Keys 5\/64 to 3\/8 Inch, Dead Blow Hammer, Pin Punch","description":"\u003cp\u003eChanging a 2 or 4 bolt pillow block or flange bearing on a conveyor, fan or mixer shaft: set screws or collar off, housing bolts out, bearing along the shaft, then the same in reverse. This kit has a 1\/2 inch drive ratchet, three SAE sockets, a 9 piece hex key set, a dead blow hammer, a pin punch and an adjustable wrench.\u003c\/p\u003e\u003cp\u003eBring a torque wrench set to your bearing maker's figures, and a spanner if your unit has an adapter sleeve locknut. Check your housing bolt size first, since metric housings need metric sockets.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ratchet-72-teeth-ip5x\"\u003e72 tooth mini ratchet with IP5X dust protection\u003c\/a\u003e (1200-72U)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-2-drive-12-point-sae-socket\"\u003e1\/2 inch drive 12 point SAE shallow sockets\u003c\/a\u003e: 3\/4 inch, 15\/16 inch, 1-1\/8 inch (M120124-C, M120130-C, M120136-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-af-9-pieces\"\u003e9 piece SAE ball point hex key set with folding holder, 5\/64 to 3\/8 inch\u003c\/a\u003e (1479AF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/dead-blow-hammer\"\u003eNo bounce soft blow dead blow hammer, 55 mm\u003c\/a\u003e (HMDH55)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/parallel-pin-punch\"\u003eParallel pin punch, 4 mm\u003c\/a\u003e (PP04)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/adjustable-wrench\"\u003eAdjustable wrench, 250 mm (9.8 in)\u003c\/a\u003e (4004)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791631860055,"sku":"BDL-SAE-PILLOW-BLOCK-BEARING","price":153.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_bdc41bfb-a10a-462b-9926-04d3606512f6.jpg?v=1794318846"},{"product_id":"tc-9-rolling-case-field-service-kit-110-piece","title":"Teng Tools TC-9 Rolling Case Field Service Kit, 110 Pieces: 1\/4 Inch Drive Metric Sockets, Metric Ratcheting Wrenches, Bits, Hex Keys, Pliers","description":"\u003cp\u003eA field engineer cannot go back to the bench, so the case carries a small one. The kit has a TC-9 rolling case, a 36 piece 1\/4 inch drive metric socket set, ratcheting wrenches with two combination wrenches to fill the gaps, a 54 piece screwdriver and bit set with ratcheting driver, 7 ball point hex keys and two pliers.\u003c\/p\u003e\u003cp\u003eThe sockets run 4 to 8 and 10 to 13 mm, the wrenches 8, 10 to 14 and 16 to 19 mm and the hex keys 2.5 to 6, 8 and 10 mm; check the machine manual for any other size. Bring a 1.5 mm hex key for M3 set screws, plus a meter, lubricant and spare belts.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/mecca-pro-tc-9-service-case\"\u003eMECCA PRO TC-9 portable rolling tool case with wheels and retractable handle\u003c\/a\u003e (TC-SC)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-drive-socket-set-6pt-36-pieces\"\u003e36 piece 1\/4 inch drive metric ratchet set with regular and deep sockets, bits and extensions in a case\u003c\/a\u003e (T1436)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ratcheting-combination-spanner-set-r-tool-roll-8-pieces\"\u003e8 piece metric ratcheting combination wrench set in a tool roll\u003c\/a\u003e (6508RMM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/screwdriver-set-mixed-54-pieces\"\u003e54 piece mixed screwdriver and Torx bit set with ratcheting driver and case\u003c\/a\u003e (MD9053N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-7-pieces\"\u003e7 piece metric ball point hex key set with folding holder\u003c\/a\u003e (1475)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/heavy-duty-combination-plier-tpr-grip\"\u003e170 mm (6.7 in) heavy duty combination pliers\u003c\/a\u003e (MB452-6T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/heavy-duty-side-cutting-plier-tpr-grip\"\u003e165 mm (6 in) heavy duty side cutting pliers\u003c\/a\u003e (MB442-6T)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/metric-combination-wrench\"\u003eMetric combination wrenches, ring and open end\u003c\/a\u003e: 16 mm, 18 mm (600516, 600518)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791680061783,"sku":"BDL-TC-9-ROLLING-CASE-FIELD","price":809.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_29d59ca5-ad0a-4d7a-8406-e60f9891d870.jpg?v=1794318252"},{"product_id":"3-4-inch-drive-flange-bolting-kit-37-piece","title":"Teng Tools 3\/4 Inch Drive Flange Bolting Kit, 37 Pieces: 30 SAE and Metric Sockets to 2 Inch and 50 mm, 50 to 300 ft-lb Torque Wrench, Backup Wrenches","description":"\u003cp\u003eA flange nut needs a socket on one side, a wrench on the other and a torque wrench in the same drive. This kit has all three: a 32 piece 3\/4 inch drive socket set with ratchet, extension and flex handle, two more SAE sockets, a 50 to 300 ft-lb click torque wrench, a 600 mm (24 inch) adjustable wrench and a 1-5\/8 inch combination wrench.\u003c\/p\u003e\u003cp\u003eThe torque wrench reads 50 to 300 ft-lb. Larger studs often need more than that at the final pass, and small studs need a lower range wrench for the first passes, so check the joint's torque sheet before you start.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-socket-set-foam4x4-32-pieces\"\u003e32 piece 3\/4 inch drive foam socket set with ratchet, extension and flex handle\u003c\/a\u003e (TTESK32)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-drive-12-point-sae-socket\"\u003e3\/4 inch drive 12 point SAE sockets\u003c\/a\u003e: 1-13\/16\", 2\" (M340158-C, M340164-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/teng-tools-3-4-torque-wrench-bi-directional-50-300-ft-lb-3492uag-er\"\u003e3\/4 inch drive bi-directional click torque wrench, 50 to 300 ft-lb\u003c\/a\u003e (3492UAG-ER)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/adjustable-wrench\"\u003e600 mm (24 inch) adjustable wrench\u003c\/a\u003e (4008)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/sae-combination-wrench\"\u003e1-5\/8 inch SAE combination wrench, open end and 12 point box end\u003c\/a\u003e (600152)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791681110359,"sku":"BDL-3-4-IN-DRIVE-FLANGE","price":1041.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_bcf192c8-adb8-47df-8a1c-ea94de9b8cd0.jpg?v=1794318272"},{"product_id":"nacelle-ratcheting-wrench-kit-17-piece","title":"Teng Tools Nacelle Ratcheting Wrench Kit, 17 Pieces: Metric Ratcheting Combination Wrenches 8 to 19 mm Set Plus 22, 24, 27, 30 and 32 mm","description":"\u003cp\u003eFor bolts in the wind turbine nacelle and hub where a socket and ratchet will not fit. A 12-piece metric ratcheting combination wrench set, 8 to 19 mm, in a FOAM2 tray, plus single ratcheting wrenches in 22, 24, 27, 30 and 32 mm for the larger bolts.\u003c\/p\u003e\u003cp\u003eThe wrenches run 8 to 19, 22, 24, 27, 30 and 32 mm. Bring any other size your job needs, and the torque or tensioning equipment your turbine maker specifies.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/72-tooth-ratcheting-combination-spanner-metric\"\u003eMetric ratcheting combination wrenches, open end and ring end\u003c\/a\u003e: 22 mm, 24 mm, 27 mm, 30 mm, 32 mm (600522R, 600524R, 600527R, 600530R, 600532R)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ratcheting-combination-spanner-set-r-foam2-12-pieces\"\u003e12 piece metric ratcheting combination wrench set in a FOAM2 tray, 8 to 19 mm\u003c\/a\u003e (TED6512R)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791683895639,"sku":"BDL-NACELLE-RATCHETING","price":514.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_1079245e-a8d7-4e28-b4d6-d2c30f165139.jpg?v=1794319312"},{"product_id":"pump-mechanical-seal-service-kit-25-piece","title":"Teng Tools Pump Mechanical Seal Service Kit, 25 Pieces: Stubby Metric Wrenches 10 to 19 mm, Ball Point Hex Keys 1.5 to 10 mm, Circlip Pliers, Scrapers","description":"\u003cp\u003eA mechanical seal change on a small metric pump is casing bolts in a tight space, set screws on the seal collar, a circlip or two and a gasket face to clean. This kit covers those steps: ten stubby combination wrenches from 10 to 19 mm, nine ball point hex keys from 1.5 to 10 mm, bent internal and external circlip pliers and a four-piece scraper set.\u003c\/p\u003e\u003cp\u003eBring the new seal, gaskets and O-rings. Check the pump manual for the impeller nut and casing bolt sizes, which vary by maker, and some pumps use inch bolts. Wrenches are metric only.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/stubby-combination-spanner-set-tt1-10-pieces\"\u003e10 piece stubby combination wrench set, 10 to 19 mm\u003c\/a\u003e (TT6010M)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-inner-bent\"\u003eBent internal circlip pliers\u003c\/a\u003e (MB471-7)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-outer-bent\"\u003eBent external circlip pliers\u003c\/a\u003e (MB473-7)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-cr-mo-9-pieces\"\u003e9 piece metric ball point hex key set, 1.5 to 10 mm\u003c\/a\u003e (1499MM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/scraper-set-4-pieces\"\u003e4 piece scraper set: gasket blade, hook, awl, pin puller\u003c\/a\u003e (TTSR04)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791688778071,"sku":"BDL-END-SUCTION-PUMP","price":152.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_95976a6f-9968-43bf-a069-5c291661b8d6.jpg?v=1794318292"},{"product_id":"clarifier-drive-pump-base-bolt-kit-17-piece","title":"Teng Tools Clarifier Drive and Pump Base Bolt Kit, 17 Pieces: 3\/4 Inch Drive Sockets, Extendable Ratchet, Wrenches 30, 32, 34 and 36 mm","description":"\u003cp\u003eLarge metric nuts on plant equipment such as drives, pumps and mixers need 3\/4 inch drive sockets, a handle to turn them and a wrench to hold the bolt head. This kit has a 10 piece 6 point metric socket set, a 34 mm socket, an extendable ratchet, a 200 mm extension bar, combination wrenches in 30, 32 and 34 mm and a 36 mm slogging wrench.\u003c\/p\u003e\u003cp\u003eCheck the fastener size before you start, because some plant equipment uses inch bolts. The sockets cover the sizes in the set plus 34 mm, and the wrenches are 30, 32, 34 and 36 mm only.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-socket-set-6-pt-foamx4-10-pieces\"\u003e10 piece 3\/4 inch drive 6 point metric socket set in a foam tray\u003c\/a\u003e (TEX3410)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-inch-drive-extendable-ratchet-72-teeth-545-860mm\"\u003e3\/4 inch drive 72 tooth extendable ratchet\u003c\/a\u003e (M340072E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-drive-extension-bar\"\u003e3\/4 inch drive extension bar, ball detent\u003c\/a\u003e (M340021-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/metric-combination-wrench\"\u003eMetric combination wrenches, ring and open end, 15 degree offset\u003c\/a\u003e: 30 mm, 32 mm, 34 mm (600530, 600532, 600534)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/open-end-slogging-wrench-metric\"\u003eMetric open end slogging wrench, chrome molybdenum\u003c\/a\u003e (902036)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/6-point-metric-socket\"\u003e3\/4 inch drive 6 point metric socket\u003c\/a\u003e (M3405346-C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791689793879,"sku":"BDL-CLARIFIER-DRIVE-AND-PUMP","price":428.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_ee912b88-2a39-4772-a596-bb900700b109.jpg?v=1794320527"},{"product_id":"hydraulic-cylinder-repack-kit-17-piece","title":"Teng Tools Hydraulic Cylinder Repack Kit, 17 Pieces: Hook and Pin Wrenches 19 to 120 mm, Circlip Pliers 40 to 100 mm, Scraper Set, Engineers Hammer","description":"\u003cp\u003eA bench reseal of a lift, tilt or side shift cylinder is a gland nut, circlips and seals. This kit covers those steps: an 8-piece adjustable hook and pin wrench set for gland nuts 19 to 120 mm, a 4-piece circlip plier set for 40 to 100 mm internal and external rings, a 4-piece scraper set and a 300 g engineers hammer.\u003c\/p\u003e\u003cp\u003eBring the new seal kit for your cylinder, a wrench or socket for the piston nut, a torque wrench, clean hydraulic oil and a vise with soft jaws. Gland and piston nut sizes and torque values come from the cylinder maker's manual. The hook and pin wrenches fit gland nuts 19 to 120 mm across, and the circlip pliers cover 40 to 100 mm rings only.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/hook-pin-wrench-set-tt1-8-pieces\"\u003e8 piece adjustable hook and pin wrench set, 19 to 120 mm\u003c\/a\u003e (TTHP08)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/scraper-set-4-pieces\"\u003e4 piece scraper set: gasket scraper, hook, awl, pin puller\u003c\/a\u003e (TTSR04)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-set-pro-40-100-mm-ttx4-4-pieces\"\u003e4 piece circlip plier set, internal and external, straight and bent, 40 to 100 mm\u003c\/a\u003e (TTX474-9E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/engineers-hammer\"\u003e300 g (0.6 lb) engineers hammer, square pein and pointed head\u003c\/a\u003e (HMEG300)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791692448087,"sku":"BDL-HYDRAULIC-CYLINDER","price":281.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_14b6e84d-fa27-4f22-8e00-d56bc8fe4226.jpg?v=1794318306"},{"product_id":"packaging-line-torx-changeover-kit-20-piece","title":"Teng Tools Packaging Line Torx Changeover Kit, 20 Pieces: TX6 to TX45 Screwdrivers, TX10 to TX40 1\/4 Inch Bit Sockets, Sliding T-Bar","description":"\u003cp\u003eGuards, sensor brackets and change parts on packaging machines are often held with Torx screws. This kit runs them two ways: a 12-piece TX screwdriver set from TX6 to TX45, and seven 1\/4 inch drive TX bit sockets on a 1\/4 inch sliding T-bar for the tighter screws.\u003c\/p\u003e\u003cp\u003eM8 screws take TX45 on cap screws and TX40 on pan and countersunk heads, so check the screw head first. The TX45 screwdriver is in the kit, but there is no 1\/4 inch drive TX45 bit socket.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/screwdriver-set-tx-tt2-12-pieces\"\u003e12 piece TX screwdriver set, TX6 to TX45, in a TT2 tray\u003c\/a\u003e (TTD912TXN)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-drive-torx-bit-socket\"\u003e1\/4 inch drive TX bit sockets\u003c\/a\u003e: TX10, TX15, TX20, TX25, TX27, TX30, TX40 (M141210T-C, M141215T-C, M141220T-C, M141225T-C, M141227T-C, M141230T-C, M141240T-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/sliding-t-bar\"\u003e1\/4 inch drive sliding T-bar\u003c\/a\u003e (M140050-C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791692874071,"sku":"BDL-PACKAGING-LINE-TORX","price":108.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_a1e6a05f-4159-4ba2-ac68-809a5fbb239e.jpg?v=1794318308"},{"product_id":"keyed-shaft-and-pin-service-kit-30-piece","title":"Teng Tools Keyed Shaft and Pin Service Kit, 30 Pieces: Pin Punches 3 to 8 mm, Cold Chisels, 24 oz Ball Pein Hammer, Files, SAE Hex Keys","description":"\u003cp\u003eA hub comes off after its pins are punched and its key is shifted, and goes back on after the burrs are filed. This kit does both halves: a 14-piece punch and chisel set, a 24 oz ball pein hammer, a 5-piece 250 mm file set, a 125 mm long nose locking plier and a 9-piece SAE ball point hex key set.\u003c\/p\u003e\u003cp\u003eBring a puller if the hub is a tight fit on the shaft. Punch sizes are metric (3 to 8 mm), so pick the one at or just under the pin diameter.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/punch-chisel-set-foam2-14-pieces\"\u003e14 piece parallel pin punch, flat cold chisel and center punch set in foam\u003c\/a\u003e (TEDPC14)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-pein-hammer\"\u003e24 oz ball pein hammer, fiberglass shaft\u003c\/a\u003e (HMBP24)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/long-nose-power-grip-plier\"\u003e125 mm long nose power grip pliers\u003c\/a\u003e (404-4)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/hand-file-set-5-pieces-ttx4\"\u003e5 piece 250 mm hand file set: flat, flat tapered, half round, round, triangular\u003c\/a\u003e (TTXF05)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-cr-mo-af-9-pieces\"\u003e9 piece SAE ball point hex key set with folding holder\u003c\/a\u003e (1499AF)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791694217559,"sku":"BDL-KEYED-SHAFT-AND-PIN","price":278.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_413d99a5-2e30-4302-a5c6-82c741f0e3cd.jpg?v=1794318328"},{"product_id":"sheave-qd-bushing-change-kit-22-piece","title":"Teng Tools Sheave and QD Bushing Change Kit, 22 Pieces: 1\/2 Inch Drive Impact Sockets, Sliding T-Bar, Hex Keys 1\/8 to 3\/8 Inch, Hex Bit Sockets","description":"\u003cp\u003eChanging a V-belt sheave on a QD or taper bushing means backing off the cap screws, jacking the taper apart, swapping the sheave and pulling the screws up evenly. This kit has five 1\/2 inch drive impact sockets for the cap screws, a 1\/2 inch sliding T-bar, a 7 piece ball end hex key set and a 9 piece 1\/2 inch drive hex bit socket set for the socket head screws.\u003c\/p\u003e\u003cp\u003eBring your own torque wrench and the bushing maker's torque table.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-af-7-pieces\"\u003e7 piece SAE ball end hex key set in a folding holder\u003c\/a\u003e (1474)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-2-drive-6-point-sae-din-impact-socket\"\u003e1\/2 inch drive 6 point SAE impact sockets\u003c\/a\u003e: 7\/16\", 1\/2\", 9\/16\", 3\/4\", 13\/16\" (920114, 920116, 920118, 920124, 920126)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/sliding-t-bar\"\u003e1\/2 inch drive sliding T-bar\u003c\/a\u003e (M120050-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-2-hex-bit-socket-clip-rail-set-sae-9-pieces\"\u003e9 piece 1\/2 inch drive SAE hex bit socket set\u003c\/a\u003e (M1209AF)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791698411863,"sku":"BDL-SHEAVE-AND-QD-BUSHING","price":97.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_1a8c05f0-5f0c-4f62-8976-70125d3c707c.jpg?v=1794318345"},{"product_id":"packaging-line-changeover-kit-26-piece","title":"Teng Tools Packaging Line Changeover Kit, 26 Pieces: 23 Piece T-Handle Hex, TX and Nut Driver Set, 10 mm Long Hex Key, Two Double Flex Wrenches","description":"\u003cp\u003eFormat changeover on a filler, labeller or case packer means releasing and refitting change parts held by many small metric fasteners. This kit has a 23 piece metric foam tray set of T-handle ball point hex keys 2.5, 3, 4, 5, 6, 7 and 8 mm, T-handle TX keys TX10, TX15, TX20, TX25, TX27, TX30 and TX40, and nut drivers 5, 5.5, 6, 7, 8, 10, 11, 12 and 13 mm, plus a 10 mm extra long hex key and double flex wrenches 10 x 11 mm and 12 x 13 mm.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/nut-driver-hex-tx-t-handle-set-foam4x4-23-pieces\"\u003e23 piece metric T-handle ball point hex key, TX key and nut driver set in a foam tray\u003c\/a\u003e (TTEX23N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/extra-long-hex-key-metric\"\u003eExtra long metric hex key\u003c\/a\u003e (320510)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/double-flex-wrench-metric\"\u003eDouble flex wrench with swivel 12 point ends\u003c\/a\u003e: 10 x 11 mm, 12 x 13 mm (651011, 651213)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791702901079,"sku":"BDL-PACKAGING-LINE","price":246.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_b2a54199-95c0-4210-ad9b-826b0c911465.jpg?v=1794318363"},{"product_id":"metric-conveyor-take-up-kit-10-piece","title":"Teng Tools Metric Conveyor Take Up Kit, 10 Pieces: 24 and 27 mm Ratcheting Wrenches, 7 Combination Wrenches to 32 mm, 5 m Tape","description":"\u003cp\u003eTensioning and tracking a belt conveyor on screw take ups takes two wrenches on one thread and a tape. This kit has 24 and 27 mm ratcheting combination wrenches, a seven piece combination wrench set and a 5 m metric tape.\u003c\/p\u003e\u003cp\u003eCheck your take up screw and jam nut size in the conveyor manual (this kit covers M16 and M18, with the wrench set to 32 mm); lock out the conveyor first.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/combination-spanner-set-ttx4-7-pieces\"\u003e7 piece large metric combination wrench set\u003c\/a\u003e (TTX2032)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/72-tooth-ratcheting-combination-spanner-metric\"\u003eRatcheting combination wrench\u003c\/a\u003e: 24 mm, 27 mm (600524R, 600527R)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/measuring-tape-metric\"\u003eMetric measuring tape\u003c\/a\u003e (MT05MM)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791711420759,"sku":"BDL-METRIC-CONVEYOR-TAKE-UP","price":203.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_6a62f53e-d415-400f-aa18-1bc663892c0a.jpg?v=1794318410"},{"product_id":"coupling-puller-kit-5-piece","title":"Teng Tools Coupling Puller Kit, 5 Pieces: Three Arm Quick Action Puller 330 x 200 mm, 600 mm Adjustable Wrench, Circlip Pliers, Engineers Hammer","description":"\u003cp\u003ePulling a coupling hub, sheave or bearing off a motor or pump shaft takes the retaining ring out first, then a puller, a long wrench on its screw and a hammer for shock. This kit has all five: a three arm puller, an adjustable wrench, inner and outer circlip pliers and an engineers hammer.\u003c\/p\u003e\u003cp\u003eBring hex keys to fit your hub set screws (the size depends on the coupling, so check its manual) and heat for any interference fit hub.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/three-arm-quick-action-puller\"\u003eThree arm quick action puller, quick lock reversible legs\u003c\/a\u003e (SP33320Q)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/adjustable-wrench\"\u003eAdjustable wrench\u003c\/a\u003e (4008)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-inner-bent\"\u003eInner bent circlip pliers\u003c\/a\u003e (MB471-9)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-outer-bent\"\u003eOuter bent circlip pliers\u003c\/a\u003e (MB473-9)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/engineers-hammer\"\u003eEngineers hammer, fiberglass shaft\u003c\/a\u003e (HMEG800)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791712469335,"sku":"BDL-COUPLING-PULLER-KIT","price":604.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_0ae9a614-a255-4fb7-951b-179475e105f6.jpg?v=1794320563"},{"product_id":"pneumatic-valve-manifold-service-kit-11-piece","title":"Teng Tools Pneumatic Valve Manifold Service Kit, 11 Pieces: Wrenches 8, 10, 12, 14 and 17 mm, Hex Keys 2.5, 3 and 4 mm, Flat and Phillips Screwdrivers","description":"\u003cp\u003eChanging a solenoid valve or a push-in fitting on a machine's valve manifold takes a handful of small tools, and they are the ones that come out of the bag on every pneumatic call. This kit has five metric combination wrenches in 8, 10, 12, 14 and 17 mm, three hex keys in 2.5, 3 and 4 mm, a flat screwdriver and two Phillips screwdrivers.\u003c\/p\u003e\u003cp\u003eValve mounting screw size and head type differ by valve maker and series. Check the valve manual for the driver or key it needs.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/flexible-head-ratcheting-combination-spanner-metric\"\u003eRF series metric ratcheting combination wrenches\u003c\/a\u003e: 12 mm, 14 mm, 17 mm (600512RF, 600514RF, 600517RF)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/stubby-combination-spanner-metric\"\u003eStubby metric combination wrench, short body\u003c\/a\u003e (6005M10)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/metric-hex-key\"\u003eMetric hex keys, chrome vanadium\u003c\/a\u003e: 2.5 mm, 3 mm, 4 mm (3105025, 310503, 310504)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/flat-head-screwdriver\"\u003eFlat head slotted screwdriver\u003c\/a\u003e (MD915N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/72-tooth-ratcheting-combination-spanner-metric\"\u003e72 tooth metric ratcheting combination wrench\u003c\/a\u003e (600508R)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/phillips-mini-screwdriver\"\u003ePhillips mini screwdriver\u003c\/a\u003e (MDM718)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/phillips-screwdriver\"\u003ePhillips screwdriver\u003c\/a\u003e (MD940N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791713452375,"sku":"BDL-PNEUMATIC-VALVE-MANIFOLD","price":125.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_1f3ab96a-ee90-4a24-83ad-c700b23626bc.jpg?v=1794318418"},{"product_id":"metric-hydraulic-fitting-wrench-kit-17-piece","title":"Teng Tools Metric Hydraulic Fitting Wrench Kit, 17 Pieces: Double Open End Wrenches 6 x 7 to 20 x 22 mm, 7 Large Combination Wrenches, Pliers Set","description":"\u003cp\u003eEvery hydraulic fitting needs one wrench on the nut and another on the body. This kit has eight double open end wrenches from 6 x 7 to 20 x 22 mm, seven combination wrenches in 20, 21, 22, 24, 27, 30 and 32 mm and a two-piece pliers wrench set for the odd sizes.\u003c\/p\u003e\u003cp\u003eSized for DIN 24 degree tube fittings up to L18 and S16; L22, S20 and larger need bigger wrenches. Bring a torque wrench if your fitting maker gives torques, and inch wrenches if your fittings are JIC or ORFS.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/double-open-ended-spanner-set-tt1-8-pieces\"\u003e8 piece metric double open end wrench set, 6 x 7 to 20 x 22 mm\u003c\/a\u003e (TT6208)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/combination-spanner-set-foamx4-7-pieces\"\u003e7 piece large metric combination wrench set\u003c\/a\u003e (TEX2032)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/plier-wrench-set-ttx4-2-pieces\"\u003e2 piece pliers wrench set in a TTX4 tray\u003c\/a\u003e (TTXMB02)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791715844439,"sku":"BDL-HYDRAULIC-FITTING-WRENCH","price":214.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_8180b2a4-8e8d-4dfe-9abb-8353349c156c.jpg?v=1794318425"},{"product_id":"machine-guard-tamper-proof-tx-kit-15-piece","title":"Teng Tools Machine Guard Tamper Proof TX Kit, 15 Pieces: TPX20, 25, 27, 30 and 40 Screwdrivers, TPX20, 25 and 30 Bits, Quick Chuck Bit Holder","description":"\u003cp\u003eGuards and interlock covers are often fitted with tamper proof TX screws so an ordinary driver will not open them. This kit has five TPX screwdrivers for hand work, nine TPX bits in packs of three and a 1\/4 inch hex quick chuck bit holder to run the bits in a drill or driver.\u003c\/p\u003e\u003cp\u003eBring a drill driver for the bits. Check the screw head and size against your guard or interlock maker's spec, as small interlock cover screws may need a smaller TPX size than this kit covers.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/tpx-screwdriver\"\u003eTPX tamper proof TX screwdrivers, 100 mm\u003c\/a\u003e: TPX20, TPX25, TPX27, TPX30, TPX40 (MD620TPN, MD625TPN, MD627TPN, MD630TPN, MD640TPN)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-tpx-bit-25mm-tpx20-3-pieces\"\u003e1\/4 inch hex TPX20 bits, 25 mm, pack of 3\u003c\/a\u003e (TPX2502003)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-quick-chuck-bit-holder-35mm\"\u003e1\/4 inch hex quick chuck bit holder, 35 mm\u003c\/a\u003e (ACC35CBH01)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-tpx-bit-25mm-tpx25-3-pieces\"\u003e1\/4 inch hex TPX25 bits, 25 mm, pack of 3\u003c\/a\u003e (TPX2502503)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-tpx-bit-25mm-tpx30-3-pieces\"\u003e1\/4 inch hex TPX30 bits, 25 mm, pack of 3\u003c\/a\u003e (TPX2503003)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791717089623,"sku":"BDL-MACHINE-GUARD-TAMPER","price":55.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_00b42907-8483-41dc-aec2-cd65d40b5e73.jpg?v=1794320580"},{"product_id":"blade-root-pitch-bearing-nut-kit-6-piece","title":"Teng Tools Blade Root and Pitch Bearing Nut Kit, 6 Pieces: 3\/4 Inch Drive Deep Impact Sockets 30, 36, 46 and 55 mm, Extendable Ratchet, Extension Bar","description":"\u003cp\u003eBlade root and pitch bearing nuts sit on long studs inside the hub, with little room to swing a bar. This kit has four 3\/4 inch drive deep impact sockets in 30, 36, 46 and 55 mm, a 72 tooth extendable ratchet and a 200 mm extension bar.\u003c\/p\u003e\u003cp\u003eBring the hydraulic tensioner or torque wrench for final load. Check your turbine's nut size first, as only 30, 36, 46 and 55 mm sockets are in this kit, and a 50 mm or 65 mm nut needs a socket you bring.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-inch-drive-extendable-ratchet-72-teeth-545-860mm\"\u003e3\/4 inch drive 72 tooth extendable ratchet, handle 545 to 860 mm (21.5 to 33.9 in)\u003c\/a\u003e (M340072E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-4-drive-extension-bar\"\u003e3\/4 inch drive extension bar, 200 mm (7.8 in)\u003c\/a\u003e (M340021-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/deep-impact-socket-metric\"\u003e3\/4 inch drive deep impact sockets\u003c\/a\u003e: 30 mm, 36 mm, 46 mm, 55 mm (940630-C, 940636-C, 940646-C, 940655-C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791719612759,"sku":"BDL-BLADE-ROOT-AND-PITCH","price":351.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_1a0b1480-c2f1-4907-b8b6-26763234908a.jpg?v=1794318455"},{"product_id":"thread-repair-kit-with-26-inch-cabinet-tray-35-piece","title":"Teng Tools Thread Repair Kit With 26 Inch Cabinet Tray, 35 Pieces: M3 to M12 Taps and Dies, 12 Needle Files, 5 Hand Files","description":"\u003cp\u003eThread repair goes in a fixed order: identify the pitch, run the tap or die, then dress the burr. This kit has a 17 piece M3 to M12 tap and die set with pitch gauge, a 12 piece needle file set, a 5 piece 250 mm hand file set and an ABS top tray with parts compartments for a 26 inch (660 mm) roller cabinet.\u003c\/p\u003e\u003cp\u003eBring cutting oil for tapping and a vise or clamp to hold the work. The tap and die set cuts coarse metric threads M3 to M12 only.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/abs-top-for-26-cabinet\"\u003eABS top tray with parts compartments for 26 inch (660 mm) roller cabinets\u003c\/a\u003e (ABS-TOP)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/tap-and-die-set-17-pieces-tt1\"\u003e17 piece metric tap and die set with handles and pitch gauge in a TT1 tray\u003c\/a\u003e (TTTD17)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/needle-file-set-12-pieces-tt1\"\u003e12 piece needle file set in a TT1 tray\u003c\/a\u003e (TTNF12)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/hand-file-set-5-pieces-ttx4\"\u003e5 piece 250 mm (9.8 in) hand file set in a TTX tray\u003c\/a\u003e (TTXF05)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791721349463,"sku":"BDL-26-IN-ROLLER-CABINET-TOP","price":168.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_390e2756-ce29-477b-938a-f8d0cf2d92e3.jpg?v=1794318459"},{"product_id":"metric-machine-maintenance-chest-64-piece","title":"Teng Tools Metric Machine Maintenance Chest, 64 Pieces: 26 Inch 3 Drawer Chest, T-Handle Hex and TX Keys, Screwdrivers, Wrenches, Sockets","description":"\u003cp\u003eUpkeep on metric machines takes hex, Torx, screwdrivers, short wrenches and sockets every shift. This kit puts them in one order: a 26 inch 3 drawer chest with ball bearing slides and a combination lock, a 23 piece T-handle hex, TX and nut driver set, 10 stubby combination wrenches, a 19 piece 3\/8 inch drive socket set and 11 screwdrivers.\u003c\/p\u003e\u003cp\u003eSaw arbor and router collet nut wrenches are made for each machine, so keep the maker's wrench with the chest. Check the manual for any hex key outside 2.5 to 8 mm.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/26-pro35%E2%84%A2-tool-chest-3-drawers-red\"\u003e26 inch PRO35 red 3 drawer middle tool chest with ball bearing slides and combination lock\u003c\/a\u003e (TSM26R3-US)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/nut-driver-hex-tx-t-handle-set-foam4x4-23-pieces\"\u003e23 piece metric T-handle ball point hex key, TX key and nut driver set in a foam tray\u003c\/a\u003e (TTEX23N)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/stubby-combination-spanner-set-tt1-10-pieces\"\u003e10 piece stubby metric combination wrench set\u003c\/a\u003e (TT6010M)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/3-8-socket-set-12-pt-tt1-19-pieces\"\u003e19 piece 3\/8 inch drive 12 point metric socket set with ratchet in a tray\u003c\/a\u003e (TT381912)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/screwdriver-set-mixed-foam2-11-pieces\"\u003e11 piece mixed screwdriver set in a foam tray: flat, Phillips and Pozidriv\u003c\/a\u003e (TED911N)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791726559575,"sku":"BDL-METRIC-MACHINE","price":744.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_95204006-5109-49ba-bec4-770b1f92438b.jpg?v=1794320602"},{"product_id":"metric-machine-guard-bolt-and-nut-kit-62-piece","title":"Teng Tools Metric Machine Guard Bolt and Nut Kit, 62 Pieces: 49 Piece 1\/4 Inch Drive Bit and Socket Set, Ring and Flex Wrenches, Ball Point Hex Keys","description":"\u003cp\u003eGuard and cover bolts sit in tight frames with the nut out of sight. This kit turns the head with a 49 piece 1\/4 inch drive set of 4 to 13 mm sockets and screwdriver bits, holds the nut with a double ring wrench, two double flex wrenches and an 8 mm combination wrench, and takes cap screws with nine ball point hex keys.\u003c\/p\u003e\u003cp\u003eThe wrenches in this kit are 8 mm and 10 to 13 mm, with no 9 mm. The hex key set has no 8 or 9 mm key.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/bits-driver-set-tt1-49-pieces\"\u003e49 piece 1\/4 inch drive bit and socket set with quick chuck driver and ratchet head in a tray\u003c\/a\u003e (TTMDQ49)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/double-ring-spanner-rigger-jigger-10-x-13mm\"\u003e10 x 13 mm angled compact double ring wrench\u003c\/a\u003e (601013)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/double-flex-wrench-metric\"\u003eDouble flex wrenches with swivel 12 point ends\u003c\/a\u003e: 10 x 11 mm, 12 x 13 mm (651011, 651213)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-a-9-pieces\"\u003e9 piece metric ball point hex key set in a folding holder\u003c\/a\u003e (1479MMA)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/metric-combination-wrench\"\u003eMetric combination wrench, ring and open end\u003c\/a\u003e (600508)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791727116631,"sku":"BDL-MACHINE-GUARD-KIT-1-4","price":128.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_7fe1ed46-abf5-408f-90eb-643f76a81c75.jpg?v=1794318489"},{"product_id":"fan-and-pump-bearing-kit-13-piece","title":"Teng Tools Fan and Pump Bearing Kit, 13 Pieces: Two Arm 330 x 200 mm Puller, Hook and Pin Wrenches, Circlip Pliers 19 to 100 mm","description":"\u003cp\u003eBearings on fans and pumps sit behind lock nuts and circlips. This kit holds a two arm quick action puller, adjustable hook wrenches for 19 to 50 mm and up to 75 mm nuts, pin wrenches for 19 to 50 and 32 to 75 mm nuts, and two four piece circlip plier sets that cover 19 to 100 mm rings.\u003c\/p\u003e\u003cp\u003eCheck the lock nut diameter in the maker's manual. The hook and pin wrenches cover 19 to 75 mm nuts, and the circlip pliers cover 19 to 100 mm rings.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/two-arm-quick-action-puller\"\u003eTwo arm quick action puller with quick lock reversible legs\u003c\/a\u003e (SP3320Q)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/hook-wrench-19\"\u003eAdjustable C hook wrenches for slotted nuts and lock rings\u003c\/a\u003e: hook, 19 to 50 mm, hook, up to 75 mm (HP101, HP102)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/pin-wrench\"\u003ePin wrenches for locking nuts with pin holes\u003c\/a\u003e: pin, 19 to 50 mm, pin, 32 to 75 mm (HP2015, HP2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-set-40-100-mm-ttx4-4-pieces\"\u003e4 piece circlip plier set, 40 to 100 mm, inner and outer, straight and bent, in a tray\u003c\/a\u003e (TTX474-9)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/circlip-plier-set-pro-19-60mm-tt1-4-pieces\"\u003e4 piece circlip plier set, 19 to 60 mm, inner and outer, straight and bent, in a tray\u003c\/a\u003e (TT474-7E)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791727903063,"sku":"BDL-FAN-AND-PUMP-BEARING-KIT","price":552.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_89cf4618-7a89-4bf1-b8f7-a2e92177dffb.jpg?v=1794318490"},{"product_id":"1-inch-drive-flange-nut-kit-6-piece","title":"Teng Tools 1 Inch Drive Flange Nut Kit, 6 Pieces: 65 and 70 mm Sockets and Slogging Wrenches, 990 mm Breaker Bar, 200 to 1000 ft-lb Torque Wrench","description":"\u003cp\u003eBig metric flange nuts need the same size on both ends, a long bar to crack them and a torque wrench for the passes, all on 1 inch drive. This kit has 65 and 70 mm 12 point sockets, 65 and 70 mm ring end slogging wrenches, a 990 mm breaker bar and a 200 to 1000 ft-lb torque wrench.\u003c\/p\u003e\u003cp\u003eTorque wrench reaches 1000 ft-lb. If your flange procedure calls for more, bring a torque multiplier or hydraulic wrench. Sockets and wrenches fit 65 mm (M42) and 70 mm (M45) nuts.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-torque-wrench-200-1000-ft-lb\"\u003e1 inch drive torque wrench, 200 to 1000 ft-lb\u003c\/a\u003e (1192Q1000F)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-socket-12pt-metric\"\u003e1 inch drive 12 point metric sockets, sold individually\u003c\/a\u003e: 65 mm, 70 mm (M110565, M110570)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ring-end-slogging-wrench-metric\"\u003eRing end slogging wrenches, heavy duty metric\u003c\/a\u003e: 65 mm, 70 mm (903065, 903070)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/breaker-bar-990mm-din-3122\"\u003e1 inch drive breaker bar, 990 mm (39 in), DIN 3122\u003c\/a\u003e (1101)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791731016023,"sku":"BDL-1-IN-DRIVE-FLANGE-KIT","price":1329.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_8641a77b-2437-453a-b068-df36f42527dd.jpg?v=1794318508"},{"product_id":"servo-coupling-and-set-screw-kit-19-piece","title":"Teng Tools Servo Coupling and Set Screw Kit, 19 Pieces: 1 to 5 Nm Torque Screwdriver, 2 and 3 mm Hex Bits, Ball Point Hex Keys, Magnet Retriever","description":"\u003cp\u003eServo motor swaps and coupling realignment mean loosening set and clamp screws, setting the gap and tightening back to the maker's torque. This kit has a 1 to 5 Nm torque screwdriver with 2 and 3 mm hex bits, nine ball point hex keys, 2.5 and 3 mm T-handle keys and a 600 mm magnet and claw retriever.\u003c\/p\u003e\u003cp\u003eThe torque screwdriver and bits set M4 clamp screws and M4 and M6 set screws to the coupling maker's value. M3 clamp screws are turned by hand with the 2.5 mm T handle key, and M5 or larger clamp screws need a torque wrench above 5 Nm. Bring thread locker if the coupling maker calls for it.\u003c\/p\u003e\u003cp\u003eIn this bundle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/ball-point-hex-key-set-9-pieces\"\u003e9 piece metric ball point hex key set with folding holder, chrome vanadium\u003c\/a\u003e (1479MM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/t-handle-ball-point-hex-key-metric\"\u003eT-handle ball point hex keys, sold individually\u003c\/a\u003e: 2.5 mm, 3 mm (5105025, 510503)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/magnetic-claw-pick-up-tool\"\u003e600 mm (23.6 in) flexible magnet and claw retriever\u003c\/a\u003e (AT135M)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-torque-screwdriver-1-5nm\"\u003e1\/4 inch drive torque screwdriver, 1 to 5 Nm\u003c\/a\u003e (1492TSD)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-hex-bits-25mm-2mm-3\"\u003e3 pack of 2 mm 1\/4 inch hex insert bits, 25 mm (1 in) long\u003c\/a\u003e (HEX2500203)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/fr\/products\/1-4-hex-bits-25mm-3mm-3\"\u003e3 pack of 3 mm 1\/4 inch hex insert bits, 25 mm (1 in) long\u003c\/a\u003e (HEX2500303)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e","brand":"Teng Tools USA","offers":[{"title":"Default Title","offer_id":55791732654423,"sku":"BDL-SERVO-COUPLING-AND-SET","price":143.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_1cb385ee-d06c-4e60-a9cd-4a8541966d6d.jpg?v=1794318510"}],"url":"https:\/\/tengtoolsusa.com\/fr\/collections\/millwright-tool-kits.oembed","provider":"Teng Tools USA","version":"1.0","type":"link"}