{"product_id":"teng-tools-bearing-and-gear-removal-set-gear-pullers-soft-face-hammer-and-punches-and-chisels-bdl-bearing","title":"Teng Tools Bearing and Gear Removal Set - 2 and 3 Arm Gear Puller Set, Soft Face Hammer, 9 Piece Pin Punch and Cold Chisel Set - BDL-BEARING","description":"\u003cp\u003eFor removing gears, pulleys and bearings: two and three arm pullers, a soft face hammer that reduces marking on the parts, and pin punches and chisels for drifting out pins and shafts. This bundle puts the three Teng Tools products a removal job calls for into one order.\u003c\/p\u003e\u003cp\u003eIn the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTT804: 4-piece combination puller set. Three-legged puller, extra yoke for two-legged pulling, reversible legs for internal or external grip, TT1 tool tray.\u003c\/li\u003e\n\u003cli\u003eHMSF: double-headed soft face hammer, 320 mm (12.6 inch), 652 g (1.4 lb).\u003c\/li\u003e\n\u003cli\u003eTTPC09: 9-piece chisel and punch set. Six parallel pin punches in a clip, one centre punch, two flat cold chisels, chrome molybdenum steel, TT1 tool tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe puller converts between three legs and two with its extra yoke, and the legs reverse, so it grips a part from the outside or from inside a bore. The soft face hammer keeps the striking marks off machined faces while the puller is set up and the part is coaxed free.\u003c\/p\u003e\u003cp\u003eThe punch and chisel tray covers the steps before and after the pull: drifting out retaining pins, marking a centre and cutting with a flat cold chisel. Both the puller and the punches arrive in Teng Tools TT1 tool tray modules, so they store in a drawer as organized sets.\u003c\/p\u003e\u003cp\u003eEach item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTWO AND THREE ARM PULLER (TT804) — A 4-piece combination puller set: a three-legged puller plus an extra yoke that converts it to two-legged pulling, so one set works as a 3 arm or a 2 jaw puller. The legs reverse for internal or external grip. Designed for fast removal of pulleys, bearings and gears, it is the pulley puller and gear remover of this bundle, organized in a TT1 tool tray. Weight 1419 g (3.1 lb).\u003c\/li\u003e\n\u003cli\u003eSOFT FACE HAMMER (HMSF) — A double-headed soft face hammer whose soft faces reduce marking on the surface being hit. Use it to tap a puller square, nudge a gear that has started to move or seat a replacement part without leaving a mark. The mallet hammer of the set, 320 mm (12.6 inch) overall with a weight of 652 g (1.4 lb).\u003c\/li\u003e\n\u003cli\u003ePUNCHES AND CHISELS, 9 PIECES (TTPC09) — A pin punch set and cold chisels in one TT1 tray: six parallel pin punches held in a clip, one centre punch and two flat cold chisels, in chrome molybdenum steel with hardened edges and points. The pin punches drift out pins and shafts, the centre punch marks a start point and the chisels cut. Weight 1428 g (3.1 lb).\u003c\/li\u003e\n\u003cli\u003eWHY THESE THREE — Removing a gear, pulley or bearing is rarely a one-tool job. Retaining pins come out first with the punches, the puller draws the part off the shaft, and the soft face hammer taps the puller true or frees a part that has started to move, without marking it. Bought as one order, the three are on the bench together when the job starts.\u003c\/li\u003e\n\u003cli\u003eFOR MAINTENANCE AND REPAIR WORK — Suited to maintenance shops, plant engineering, agricultural and automotive workshops and service technicians who strip down drives and assemblies. Three standard Teng Tools products, TT804, HMSF and TTPC09, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: BDL-BEARING\u003c\/p\u003e","brand":"Teng Tools","offers":[{"title":"Default Title","offer_id":55565013778775,"sku":"BDL-BEARING","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9793\/6983\/files\/01-hero_aa44f72f-b3e5-4984-ae2c-bb0259f7c2dc.jpg?v=1792801636","url":"https:\/\/tengtoolsusa.com\/fr\/products\/teng-tools-bearing-and-gear-removal-set-gear-pullers-soft-face-hammer-and-punches-and-chisels-bdl-bearing","provider":"Teng Tools USA","version":"1.0","type":"link"}