Dados de impacto
CHROME MOLYBDENUM STRENGTH FOR POWER TOOL USE
Teng Tools impact sockets are manufactured from heavy duty chrome molybdenum (CR-MO) steel, delivering the exceptional strength and flexibility required for use with pneumatic and power tools.
Black Phosphate Finish
The black phosphate finish provides instant visual identification as an impact-rated accessory and gives maximum protection against corrosion and wear.
6 Point High Torque
The 6 point high torque design grips the flat sides of a fastener rather than the corners, reducing the risk of rounding off even under high load. Roll stamped size markings ensure permanent and instant identification in any working environment.
Range & Standards
Available in metric and SAE, shallow and deep, across a full range of drive sizes. Manufactured to ANSI and DIN standards.
-
Teng Tools 1/2 Drive 6-Point Metric DIN Impact Socket 8-32 mm - Individual Half Inch Drive Impact Socket Sold Separately - Choose Your Size -
Juego de destornillador de impacto manual de 15 piezas de 1/2 pulgada de Teng Tools - Puntas hexagonales, Phillips y planas con adaptadores y estuche - ID515 -
Juego de 14 llaves de vaso de impacto profundo Teng Tools con accionamiento de 1/2", medidas SAE de 7/16 a 1 pulgada, en bandeja de espuma CrMo DIN FOAM1 - TEA9214LAF -
Juego de llaves de vaso de impacto Teng Tools de 16 piezas, de cromo molibdeno, DIN, de 6 puntas, SAE, regular/poco profundo, de 1/2 pulgada, con espuma EVA (3/8 - 1-1/4 pulgadas) Herramienta mecánica | Herramienta manual - TEA9216AF -
Juego de 50 puntas de impacto hexagonales de 1/4" Teng Tools — S2, PH PZ TX Hex ROB, soporte magnético, bandeja FOAM1 - TEABS50 -
Teng Tools Adaptador de impacto 3/8in H 1/2in M DIN — 980036-C -
Vaso de impacto métrico Teng Tools de 1 pulgada y 95 mm - Especificación DIN para fijación con herramientas eléctricas de uso intensivo - 910595 -
Juego de vasos de impacto métricos profundos ANSI de 6 puntas y 10 piezas de 1/2 pulgada de Teng Tools - 9126 -
Juego de destornillador de impacto manual de 1/4 pulgada Teng Tools - Kit de 7 piezas con puntas planas, puntas Phillips y extractores de tornillos - IDSE7 -
Teng Tools Adaptador de impacto DIN de cromo molibdeno de 1/2 pulgada hembra a 3/8 pulgadas macho para vasos | Herramienta de mecánico | Herramienta manual - 920036N -
Teng Tools Adaptador de Impacto de 3/4" Hembra a 1/2" Macho - 940037-C -
Teng Tools Adaptador de Impacto ANSI de 1/2 Pulgada Cuadrado Hembra a 3/4 Pulgadas Cuadrado Macho - 920037AN -
Teng Tools Vaso de impacto de cromo molibdeno extra largo de 32 mm (3/4 pulg.) con arrastre de 6 puntas métricas y 15,7 pulgadas | Herramienta mecánica | Herramienta manual - 940732-C -
Vaso de impacto hexagonal de 1/2 pulgada 5-19 mm Teng Tools: Vaso de impacto Allen métrico de CrMo para profesionales -
Vaso de impacto métrico de 1-1/2 pulgadas Teng Tools, 130 mm - Pieza individual de alta resistencia para uso industrial - 912130 -
Llave de vaso de impacto profunda Teng Tools de 1/2" métrica de 10-24 mm - Vasos de impacto profundos individuales con clasificación ANSI para herramientas eléctricas - Elija su tamaño -
Vaso de impacto métrico de 1/4" Teng Tools 6-13 ANSI: repuesto individual para llaves y atornilladores de impacto -
Teng Tools Heavy Wheel Nut Set, 25 to 250 ft-lb Torque Wrench, 600 mm Breaker Bar and 16 Piece 1/2 Inch Metric Impact Socket Set - BDL-WHEEL-TRUCK -
Teng Tools Impact Socket Retaining Pin 4 x 33 to 6 x 110 mm - Individual Pin for DIN Impact Sockets, Use With a Retaining Ring - Choose Your Size -
Teng Tools Impact Socket Retaining Ring 19 x 4 to 115 x 10 mm - Individual Ring for DIN Standard Impact Sockets and Accessories - Choose Your Size -
Teng Tools 1/2 Inch Drive XZN Triple Square Impact Socket M14-M18, 78 mm Long - Individual DIN Impact Bit Socket, Chrome Molybdenum - Choose Your Size -
Teng Tools 1/2 Inch Drive Torque Stick 90 to 140 Nm - Individual Torque Limiting Extension for Wheel Nuts with an Air Gun - Choose Your Size -
Teng Tools 1/2 Inch Drive Torx Impact Socket TX10 to TX70 DIN - Chrome Molybdenum, Black Phosphate, Pin and Ring Fixing - Choose Your Size -
Teng Tools 1/2 Drive Metric DIN XZN Triple Square Impact Socket M14-M18 - Individual Sizes - Choose Your Size
Common questions
What makes an impact socket different from a regular socket?
Material and rating. Impact sockets are made from CrMo (chrome molybdenum) steel to absorb the hammering of pneumatic and power tools. Regular chrome sockets must never be used on impact tools — that's the first rule in the printed care guide.
What sizes and types are available?
Drives from 3/8" up to 1-1/2", in metric and SAE, with standard, deep, stubby, thinwall, extra long and double-ended types — for 6-point, Hex, TX and XZN (triple square) fasteners. Manufactured to DIN and ANSI standards.
Do I need a retaining ring and pin?
On DIN-standard impact sockets, yes — the retaining ring and pin safely secure the socket to the impact tool. Fit them before use.
How do I make impact sockets last?
Keep them clean and dry, use the correct size for the fastener, and never extend the tool with a pole for leverage.
Los valores de par y las directrices de calibración proceden del catálogo de Teng Tools. Siga siempre el par especificado por el fabricante del elemento de fijación.