Brocas y sierras
DRILL, CUT AND THREAD
Drill bits, saws and drilling accessories for metal, wood and plastic — from DIN-standard twist drill sets to hacksaws in metal and wood tooth counts, plus taps and dies in SK5 steel rated to 58 HRC for cutting and repairing threads. Sized for the workshop jobs that come up every day.
Comprar por tipo
Mixed Tool KitsPlier and Cutting KitsJuegos de herramientas generalesStudent Tool KitsSocket KitsSierrasTool Storage AccessoriesScrewdriver and Bit KitsJuegos de herramientas de servicioJuegos de herramientas de corteJuegos de Herramientas de ServicioHex and Torx Key KitsDrill BitsConjuntos de Herramientas de ServicioAir Tool KitsAdaptador de brocasAccesorios para almacenamiento de herramientasAccesorios de almacenamiento de herramientas
-
Sierra de arco mini Teng Tools de 150 mm, 24 TPI, sierra manual para corte de metal en espacios reducidos — Sierra compacta para profesionales - 705 -
Juego de herramientas de mecánica de servicio general Teng Tools de 219 piezas: llaves dinamométricas, brocas, machos, terrajas, remachadora, remachadora de tuercas - TTEX219 -
Soporte flexible para puntas hexagonales de 1/4" Teng Tools - Extensión flexible de 300 mm para atornillador y taladro - ACC300CBH01 -
Juego de 9 herramientas manuales generales Teng Tools: llaves, martillos, alicates, sierra para metales, cuchillo, cinta métrica y regla en bandeja TT4 - TTPS09E -
Sierra de arco Teng Tools: sierra manual de doble uso de 300 mm con diseño de empuñadura tipo pistola, 24 TPI para metal y 10 TPI para madera/plástico -
Teng Tools Exhaust Clamp and Tailpipe Kit, 10 Pieces: Air Saw, Chain Pipe Cutter, 3/8 in Ratchet, Deep Sockets 7/16 to 9/16, 11/16, 3/4 in, 13, 15 mm -
Teng Tools Light and Siren Pass-Through Hole Kit, 7 Pieces: 3 Piece Step Drill Set 3 to 35 mm, Center Punch, 8 oz Hammer, Round and Needle Files -
Teng Tools Racking Rail and Strut Cutting Kit, 10 Pieces: 300 mm Hacksaw, 200 mm Try Square, 10 Inch File, Snips, Scriber, Deburring Tool, Tape -
Teng Tools RV Scissor Jack Crank and Flashlight Kit, 4 Pieces: 3/8 Inch Drive 3/4 Inch Socket, Speed Brace, Drill Adaptor, 1200 Lumen Flashlight -
Teng Tools Combiner Conduit Entry Kit, 11 Pieces: 3 Step Drills to 35 mm, Punch and Chisel Set, Hammer, Round File, Water Pump Pliers -
Teng Tools Apparatus Body Rivet Repair Kit, 117 Pieces: Lazy Tongue Rivet Gun, 81 Piece Rivet Gun Set, 3, 4 and 4.5 mm Drill Bits, 5 Piece Punch Set -
Teng Tools Chainsaw and Trimmer Bench Kit, 17 Pieces: 3/8 Inch Spinner, 13 and 19 mm Deep Sockets, 16 mm Plug Socket, TX27, Flat Drivers, Hex Keys -
Teng Tools Panel Wire Duct and DIN Rail Cut Kit, 16 Pieces: 3 m Tape, Scribe, Mini Hacksaw, 190 mm Snips, File, Utility Knife, 10 Spare Blades -
Teng Tools EMT Conduit Run Kit, 6 Pieces: Mini Hacksaw, Triangular File, 250 mm Water Pump Pliers, Flat and Phillips Screwdrivers, 10 m Tape -
Teng Tools RV Stabilizer Jack Kit with Kneeling Pad and Worklight, 5 Pieces: 3/4 Inch Socket, 3/8 Inch Drive Speed Brace, Hex Drill Adapter -
Teng Tools Forklift Warning Light Install Kit, 41 Pieces: 34 Drill Bits 1 to 13 mm, Center Punch, Deburring Tool, Wire Stripper Crimper, Wrenches -
Teng Tools Chainsaw T-Bar Socket Service Kit, 7 Pieces: 13 and 19 mm T-Bar Sockets, 16 mm Plug Socket, Spinner Handle, TX27 and Slotted Drivers -
Teng Tools Stripped Hinge Screw Removal Kit, 48 Pieces: Extractors 1 to 5, Drill Bits 1 to 13 mm, Power Thru Drivers, Hammer -
Teng Tools Back Plate Drill and Tap Kit, 38 Pieces: 34 Piece M3 to M12 Tap and Die Set, Center Punch, Scriber, Deburring Tool, Steel Rule -
Teng Tools Roof Attachment Kit, 30 Pieces: Impact Lag Sockets 7/16 to 9/16 Inch, Hex Adaptors, 5.5 and 6.5 mm Pilot Drills, Claw Hammer, Pry Bar -
Teng Tools Rivet Nut Mounting Kit, 111 Pieces: Nutsert Gun with 80 Rivet Nuts M3 to M6, 1 to 13 mm Drill Bit Set, Center Punch, 300 g Hammer -
Teng Tools 1/4 Inch Hex Drill Driver Bit Kit, 37 Pieces: PH2, PH3 and TX25 Bits, 8 mm Nut Setters, Quick Chuck Holder, 300 mm Flexible Holder -
Teng Tools Fabrication Bench Kit, 16 Pieces: 4 Inch Vise, 250 mm File Set, Hacksaw with Spare Blades, Hammer, Cold Chisel, Center Punch, Awl, Rule -
Teng Tools Hacksaw and Pipe Deburring Kit, 7 Pieces: 300 mm Hacksaw, Four Spare 24 TPI Blades, Deburring Tool, 250 mm Half Round File
Common questions
What standards are the drill bits made to?
Drill bit sets are manufactured to DIN standards (twist drills to DIN 338).
What are the taps and dies made of?
SK5 steel, rated to 58 HRC — taps manufactured to DIN 352 and dies to DIN 223.
How do I stop drill bits burning out in steel?
Slow down and lubricate. Larger bits need lower RPM; a drop of cutting fluid or oil on steel keeps the edge cool and the swarf flowing. Let the bit cut at its own pace — heavy pressure with high speed is what turns a bit blue and soft. Step up through a pilot hole for larger diameters.
How do I use a tap without snapping it?
Drill the correct tap-drill hole first (the tap packaging or a tap-drill chart gives the size per thread), keep the tap square to the hole, and cut with a back-off rhythm — half a turn forward, quarter turn back to break the chip. Cutting fluid on steel, and never force it: SK5 steel at 58 HRC is hard, and hard means brittle if bent.
What's the difference between a tap and a die?
A tap cuts internal threads (in a hole); a die cuts external threads (on a rod or bolt). Teng taps are made to DIN 352 and dies to DIN 223, both in SK5 steel.
Los valores de par y las directrices de calibración proceden del catálogo de Teng Tools. Siga siempre el par especificado por el fabricante del elemento de fijación.