Dados de impacto
CHROME MOLYBDENUM STRENGTH FOR POWER TOOL USE
Impact sockets in 3/8, 1/2, 3/4 and 1 inch drive, metric and SAE, regular and deep, in chrome molybdenum, plus impact adaptors and impact bits. Teng Tools impact sockets are manufactured from heavy duty chrome molybdenum (CR-MO) steel, delivering the exceptional strength and flexibility required for use with pneumatic and power tools.
Black Phosphate Finish
The black phosphate finish provides instant visual identification as an impact-rated accessory and gives maximum protection against corrosion and wear.
6 Point High Torque
The 6 point high torque design grips the flat sides of a fastener rather than the corners, reducing the risk of rounding off even under high load. Roll stamped size markings ensure permanent and instant identification in any working environment.
Range & Standards
Available in metric and SAE, shallow and deep, across a full range of drive sizes. Manufactured to ANSI and DIN standards.
-
Teng Tools 1/2 Drive 6-Point Metric DIN Impact Socket 8-32 mm - Individual Half Inch Drive Impact Socket Sold Separately - Choose Your Size -
Juego de destornillador de impacto manual de 15 piezas de 1/2 pulgada de Teng Tools - Puntas hexagonales, Phillips y planas con adaptadores y estuche - ID515 -
Juego de 50 puntas de impacto hexagonales de 1/4" Teng Tools — S2, PH PZ TX Hex ROB, soporte magnético, bandeja FOAM1 - TEABS50 -
Juego de 14 llaves de vaso de impacto profundo Teng Tools con accionamiento de 1/2", medidas SAE de 7/16 a 1 pulgada, en bandeja de espuma CrMo DIN FOAM1 - TEA9214LAF -
Vaso de impacto hexagonal de 3/8" Teng Tools, 4-12 mm - Vaso con punta Allen de medidas métricas vendido por unidad - Vaso de impacto con punta hexagonal de repuesto -
Juego de llaves de vaso de impacto Teng Tools de 16 piezas, de cromo molibdeno, DIN, de 6 puntas, SAE, regular/poco profundo, de 1/2 pulgada, con espuma EVA (3/8 - 1-1/4 pulgadas) Herramienta mecánica | Herramienta manual - TEA9216AF -
Teng Tools Adaptador de impacto 3/8in H 1/2in M DIN — 980036-C -
Vaso de impacto métrico Teng Tools de 1 pulgada y 95 mm - Especificación DIN para fijación con herramientas eléctricas de uso intensivo - 910595 -
Juego de llaves de vaso de impacto Teng Tools TT9116N, de 16 piezas, de 1/2 pulgada, métricas, de 6 puntas, poco profundas/regulares y profundas, ANSI -
Juego de vasos de impacto métricos profundos ANSI de 6 puntas y 10 piezas de 1/2 pulgada de Teng Tools - 9126 -
Juego de destornillador de impacto manual de 1/4 pulgada Teng Tools - Kit de 7 piezas con puntas planas, puntas Phillips y extractores de tornillos - IDSE7 -
Teng Tools Adaptador de impacto DIN de cromo molibdeno de 1/2 pulgada hembra a 3/8 pulgadas macho para vasos | Herramienta de mecánico | Herramienta manual - 920036N -
Teng Tools Adaptador de Impacto de 3/4" Hembra a 1/2" Macho - 940037-C -
Teng Tools Adaptador de Impacto ANSI de 1/2 Pulgada Cuadrado Hembra a 3/4 Pulgadas Cuadrado Macho - 920037AN -
Vaso de impacto hexagonal de 1/2 pulgada 5-19 mm Teng Tools: Vaso de impacto Allen métrico de CrMo para profesionales -
Vaso de impacto métrico de 1-1/2 pulgadas Teng Tools, 130 mm - Pieza individual de alta resistencia para uso industrial - 912130 -
Llave de vaso de impacto profunda Teng Tools de 1/2" métrica de 10-24 mm - Vasos de impacto profundos individuales con clasificación ANSI para herramientas eléctricas - Elija su tamaño -
Vaso de impacto métrico de 1/4" Teng Tools 6-13 ANSI: repuesto individual para llaves y atornilladores de impacto -
Teng Tools Powersports Plastics Bit Kit, 32 Pieces: 12 Piece TX Impact Bit Set, 5 Nut Setters, 10 PH2 Bits, Flexible Bit Holder, 4 Trim Tools -
Teng Tools 1/2 Inch Drive Stubby Impact Socket Set on Clip Rail, 33 Pieces: 12 Metric Sockets 10, 12 to 19, 21, 22 and 24 mm, Rail and 20 Clips -
Teng Tools 1 Inch Drive Large Metric Impact Socket Kit, 8 Pieces: Sockets 55, 60, 65 and 70 mm, Ratchet Head, Power Bar, 400 mm Extension, T-Bar -
Teng Tools 3/4 Inch Drive Small SAE Deep Impact Socket Set, 8 Pieces: 6 Point Deep Sockets 3/4 to 1-3/16 Inch by Sixteenths -
Teng Tools 1 Inch Drive Deep Thin Wall Impact Socket Set, 7 Pieces: Metric 24, 27, 28, 30, 32, 33 and 36 mm -
Teng Tools 3/4 Inch Drive Large Metric Impact Socket Set, 9 Pieces: 32, 33, 34, 36, 38, 40, 41, 46 and 50 mm, 6 Point CrMo
Common questions
What makes an impact socket different from a regular socket?
Material and rating. Impact sockets are made from CrMo (chrome molybdenum) steel to absorb the hammering of pneumatic and power tools. Regular chrome sockets must never be used on impact tools — that's the first rule in the printed care guide.
What sizes and types are available?
Drives from 3/8" up to 1-1/2", in metric and SAE, with standard, deep, stubby, thinwall, extra long and double-ended types — for 6-point, Hex, TX and XZN (triple square) fasteners. Manufactured to DIN and ANSI standards.
Do I need a retaining ring and pin?
On DIN-standard impact sockets, yes — the retaining ring and pin safely secure the socket to the impact tool. Fit them before use.
How do I make impact sockets last?
Keep them clean and dry, use the correct size for the fastener, and never extend the tool with a pole for leverage.
Los valores de par y las directrices de calibración proceden del catálogo de Teng Tools. Siga siempre el par especificado por el fabricante del elemento de fijación.