Trade Tool Kits
Kits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.
-
Teng Tools 1-1/4 Inch Flange Nut Kit, 9 Pieces: 12 Point and Deep Impact Sockets, Backup Wrench, Extendable Ratchet, Torque Wrench, Pry Bar Set -
Teng Tools Compact Tractor and Loader Kit, 73 Pieces: 26 Inch Tool Chest, 1/2 Inch Metric Socket Set, 20 to 32 mm Wrenches, Torque Wrench, Tire Lever -
Teng Tools Robot Dress Pack Cable Tie Kit, 5 Pieces: Zip Tie Gun, 125 mm Flush Cut Pliers, 4, 5 and 6 mm T-Handle Hex Keys -
Teng Tools Combiner Conduit Entry Kit, 11 Pieces: 3 Step Drills to 35 mm, Punch and Chisel Set, Hammer, Round File, Water Pump Pliers -
Teng Tools Flange and Stud Gauging Kit, 4 Pieces: Thread Gauge, 150 mm Vernier Caliper, 300 mm Steel Rule, 10 m Tape -
Teng Tools Metering Pump Service Kit, 12 Pieces: 42 mm PE Tubing Cutter, T-Handle Hex Keys, Pinch-Off Pliers, Water Pump Pliers, Wrench, Screwdriver -
Teng Tools Robot Cell Commissioning Kit, 97 Pieces: Cantilever Box, T-Handle Hex, TX, Nut Drivers, 35 Bit Sockets, Sensor Nut Wrenches, Torque Set -
Teng Tools Metric Flange Bolting and Torque Multiplier Kit, 24 Pieces: 3/4 Inch Sockets 19 to 50 mm, Ratchet, Slogging Wrenches 24, 30, 36 and 41 mm -
Teng Tools Trailer Wheel Bearing Repack Tool Kit, 6 Pieces: Cotter Pin Puller, Water Pump, Side Cutting and Long Nose Pliers, Screwdriver, Mallet -
Teng Tools RV Slide-Out Seal and Trim Kit, 26 Pieces: 19 mm Utility Knife, 10 Hook Blades, V and U Trim Tools, 12 Piece Bit Set, Pincers -
Teng Tools Apparatus Body Rivet Repair Kit, 117 Pieces: Lazy Tongue Rivet Gun, 81 Piece Rivet Gun Set, 3, 4 and 4.5 mm Drill Bits, 5 Piece Punch Set -
Teng Tools SAE Cap Screw Torque Kit, 11 Pieces: Hex Bit Sockets 1/4 to 1/2 Inch, Three Torque Wrenches 30 to 600 ft-lb, Breaker Bar, Adaptor, Ratchet -
Teng Tools Wood Door Lock and Hinge Mortise Kit, 7 Pieces: 22 and 32 mm Chisels, 13 oz Hammer, 9 mm Knife with Blades, Center Punch, PH2 Screwdriver -
Teng Tools SAE Coupling Guard Kit, 13 Pieces: 1/4 Inch Drive Long Ratchet, 7/16 and 1/2 Inch Sockets, Double Ring and Open End Wrenches, Hex Keys -
Teng Tools Dryer and Range Cord Change Kit, 7 Pieces: 1/4 Inch Drive Ratchet, 1/4, 5/16, 3/8 Inch Sockets, Phillips, Flat Screwdrivers, Side Cutters -
Teng Tools M16 and M20 Cap Screw Torque Kit, 6 Pieces: 3/4 Inch Drive 14 and 17 mm Hex Bit Sockets, 100 to 600 ft-lb Torque Wrench, Breaker Bar -
Teng Tools Instrument Tube Fitting Wrench Kit, 10 Pieces: SAE Wrenches 3/8 to 7/8 Inch, 200 mm Adjustable Wrench, Tube Cutter, Deburring Tool -
Teng Tools Panel Wire Duct and DIN Rail Cut Kit, 16 Pieces: 3 m Tape, Scribe, Mini Hacksaw, 190 mm Snips, File, Utility Knife, 10 Spare Blades -
Teng Tools Chainsaw and Trimmer Bench Kit, 17 Pieces: 3/8 Inch Spinner, 13 and 19 mm Deep Sockets, 16 mm Plug Socket, TX27, Flat Drivers, Hex Keys -
Teng Tools Converter Module Torque Kit, 8 Pieces: 1/4 Inch Drive 1 to 25 Nm Torque Set, 4 to 6 mm Hex Bits, 10 and 13 mm Sockets -
Teng Tools Commercial Door Hardware Kit, 21 Pieces: Phillips, Flat, TX and TPX Drivers, SAE Hex Keys, Claw Hammer, Pin Punch, Cantilever Box -
Teng Tools Tube Nut Insert Torque Wrench Kit, 10 Pieces: 20 to 100 Nm Wrench, Ratchet Head, Open End 14, 17, 19 mm, Box End 13 and 16 to 19 mm -
Teng Tools Glass and Large Tile Setting Kit, 7 Pieces: Triple and Double Suction Lifters, 600 mm Magnetic Level, Rubber Mallet, Knife, Tape, Tool Bag -
Teng Tools Hydraulic Fitting Torque Kit, 9 Pieces: 14 x 18 mm Insert Torque Wrench 40 to 200 Nm, Insert Ratchet Head, Seven Open End Inserts
