Outils de coupe
PRECISION, PERFORMANCE, AND DURABILITY
Utility knives, tin snips, hacksaws, pipe cutters, bolt cutters from 14 to 36 inch, files and tap and die sets, plus replacement blades. From hacksaws and utility knives to precision snips and blades, each tool is engineered to deliver clean, accurate cuts with minimal effort. Designed for professional use across workshops, garages, and industry, TengTools cutting solutions combine ergonomic comfort with long-lasting sharpness - giving you the control and confidence to get the job done right, every time.
-
Jeu de 5 limes à main Teng Tools 250 mm — plate, plate effilée, demi-ronde, ronde, triangulaire dans plateau TTX — TTXF05 -
Jeu de 12 limes aiguilles Teng Tools : main, ronde, couteau, carrée, ovale, plume, plate - TTNF12 -
Teng Tools 1/4 Inch Drive Tap Chuck M3-M8 and M5-M12 - Ratchet Tap Holder for Metric Taps, Knurled Grip, Satin Finish - Choose Your Size -
Coffret de 17 tarauds et filières métriques Teng Tools - Tarauds, filières, porte-outils et jauge de pas de M3 à M12 dans un plateau TT1 - TTTD17 -
Ciseaux de bricolage Teng Tools 140 mm en acier inoxydable à haute teneur en carbone - Ciseaux de coupe polyvalents à lame droite - 497 -
Cisaille à tôle droite Teng Tools 250 mm - mâchoires en acier CrMo, poignées bi-matière, coupe-tôle pour CVC et toiture - 490 -
Mini scie à métaux Teng Tools 150 mm, 24 TPI pour espaces restreints — Petite scie compacte pour artisans - 705 -
Teng Tools Scaffolder Set - 19 x 22 mm Ratcheting Podger Spud Wrench, Compact Bolt Cutter, 8 m Tape Measure and Torpedo Level - BDL-SCAFFOLD -
Teng Tools Bolt Cutter 14 to 36 Inch (350-900 mm) - Compound Action, Hardened Cutting Edge, Adjustable Centering Screw - Choose Your Size -
Teng Tools Metric Threading Die M3-M12 - Individual Round Split Die, SK5 Carbon Steel, for Cutting and Repairing External Threads on Bolts and Rods - Choose Your Size -
Kit d'outils de dudgeonnage métriques 10 pièces Teng Tools avec coupe-tube 3-32 mm, étau et 7 adaptateurs métriques en plateau TT1 - TTTF10 -
Ébavureur Teng Tools avec lame pivotante en acier rapide (HSS) pour tuyaux, trous et bords - 2 lames HSS incluses - DET01 -
Cisailles pour câbles électriques/coupe-câbles en cuivre et aluminium Teng Tools - 496 -
Scie à métaux Teng Tools — Scie à main double usage, 24 TPI pour métal et 10 TPI pour bois/plastique, 300 mm de long, conception avec poignée pistolet -
Teng Tools Forklift Warning Light Install Kit, 41 Pieces: 34 Drill Bits 1 to 13 mm, Center Punch, Deburring Tool, Wire Stripper Crimper, Wrenches -
Teng Tools Racking Rail and Strut Cutting Kit, 10 Pieces: 300 mm Hacksaw, 200 mm Try Square, 10 Inch File, Snips, Scriber, Deburring Tool, Tape -
Teng Tools Metering Pump Service Kit, 12 Pieces: 42 mm PE Tubing Cutter, T-Handle Hex Keys, Pinch-Off Pliers, Water Pump Pliers, Wrench, Screwdriver -
Teng Tools EMT Conduit Run Kit, 6 Pieces: Mini Hacksaw, Triangular File, 250 mm Water Pump Pliers, Flat and Phillips Screwdrivers, 10 m Tape -
Teng Tools Air Brake Line and Fitting Kit, 6 Pieces: 42 mm Tubing Cutter, SAE Open End and Ratcheting Wrenches 1/2 to 7/8 Inch, Pliers Wrench -
Teng Tools RV Roof Vent and Fan Swap Kit, 33 Pieces: 19 mm Utility Knife, Hook and Standard Blades, ROB2 and PH2 Impact Bits, Holder -
Teng Tools DC Charger Cable Lug Torque Kit, 20 Pieces: 1/4 Inch 40 to 250 in-lb and 3/8 Inch 20 to 110 Nm Torque Wrenches, Sockets, Cable Cutter -
Teng Tools Hacksaw and Pipe Deburring Kit, 7 Pieces: 300 mm Hacksaw, Four Spare 24 TPI Blades, Deburring Tool, 250 mm Half Round File -
Teng Tools Thread Cutting Kit, 68 Pieces: M3 to M12 Tap and Die Set, 50 Metric Tap Drills in 5, 6.8 and 8.5 mm, 5 mm Center Punch -
Teng Tools M5 Thread Repair and Screw Extractor Kit, 17 Pieces: M5 x 0.8 Tap, T-Handle Tap Wrench, 4.2 mm Drills, 5 Piece Extractor Set
Common questions
What's in the cutting range?
Hacksaws, utility knives, precision snips, shears and blades — engineered for clean, accurate cuts with minimal effort across workshop, garage and industrial use.
What are the snips and saws made of?
Tin snips are CrMo (chrome molybdenum) steel, several with bi-material handles; hacksaw frames are aluminum with high speed steel blades; workshop scissors are high carbon stainless steel; taps and dies are SK5 steel to DIN standards.
How do I choose the right hacksaw blade?
Match the blade to the material: fine-toothed for thin metal, coarse-toothed for thicker materials. Never use the wrong blade for the material — it wears fast or breaks.
What's the right sawing technique?
Hold the saw with both hands and use long, smooth strokes. Don't force it, don't twist or bend the blade, and don't keep cutting with a dull blade — that's how blades stick, snap, or leave rough cuts.
How should I maintain and store a saw?
A light oil on the blade reduces friction; store dry with the blade covered.
Do the snips say what they can cut?
Yes — cutting capacity is specified per wire type: piano wire, hard, medium hard, soft, steel, stainless steel, spring steel and iron wire.
Any safety essentials?
Wear safety glasses and gloves when cutting — flying debris is the everyday hazard, and the printed guide is blunt about not skipping protective gear.
Les valeurs de couple et les instructions d'étalonnage proviennent du catalogue Teng Tools. Toujours suivre les spécifications de couple du fabricant de la fixation.