Douilles à chocs
CHROME MOLYBDENUM STRENGTH FOR POWER TOOL USE
Teng Tools impact sockets are manufactured from heavy duty chrome molybdenum (CR-MO) steel, delivering the exceptional strength and flexibility required for use with pneumatic and power tools.
Black Phosphate Finish
The black phosphate finish provides instant visual identification as an impact-rated accessory and gives maximum protection against corrosion and wear.
6 Point High Torque
The 6 point high torque design grips the flat sides of a fastener rather than the corners, reducing the risk of rounding off even under high load. Roll stamped size markings ensure permanent and instant identification in any working environment.
Range & Standards
Available in metric and SAE, shallow and deep, across a full range of drive sizes. Manufactured to ANSI and DIN standards.
-
Teng Tools 1/2 Drive 6-Point Metric DIN Impact Socket 8-32 mm - Individual Half Inch Drive Impact Socket Sold Separately - Choose Your Size -
Jeu de 15 tournevis à frapper 1/2" Teng Tools - Embouts hexagonaux, Phillips et plats avec adaptateurs et coffret - ID515 -
Jeu de 14 douilles à chocs longues 1/2" Teng Tools - Tailles SAE de 7/16 à 1 pouce - Acier CrMo DIN dans plateau en mousse FOAM1 - TEA9214LAF -
Jeu de douilles à chocs en mousse EVA Teng Tools 16 pièces 6 pans SAE courtes 1/2" en chrome-molybdène DIN (3/8 - 1-1/4") | Outil de mécanicien | Outil à main - TEA9216AF -
Jeu de 50 embouts à chocs hexagonaux 1/4" Teng Tools — S2, PH PZ TX Hex ROB, porte-embout magnétique, plateau FOAM1 - TEABS50 -
Adaptateur à chocs Teng Tools 3/8" F 1/2" M DIN — 980036-C -
Douille à choc métrique Teng Tools 1 pouce, 95 mm - Spécification DIN pour le serrage avec outils motorisés à usage intensif - 910595 -
Jeu de 10 douilles métriques à chocs Teng Tools 9126, 6 pans, longues, carré 1/2 pouce, ANSI -
Jeu de tournevis à frapper manuel 1/4" Teng Tools - Kit de 7 pièces avec embouts plats, embouts Phillips et extracteurs de vis - IDSE7 -
Teng Tools Adaptateur à chocs DIN 1/2 pouce femelle vers 3/8 pouce mâle en chrome molybdène, entraînement 1/2 pouce | Outil de mécanicien | Outil à main - 920036N -
Adaptateur Teng Tools Impact carré 3/4" mâle 1/2" - 940037-C -
Adaptateur Teng Tools pour clé à chocs 1/2" ANSI, carré femelle 1/2", carré mâle 3/4" - 920037AN -
Teng Tools Douille à chocs métrique 6 pans extra longue 3/4" 32MM en chrome-molybdène 400 mm | Outil de mécanicien | Outil à main - 940732-C -
Douille à embout six pans pour clé à chocs 1/2" 5-19 mm Teng Tools — Douille impact métrique Allen en CrMo pour professionnels -
Douille à choc métrique Teng Tools, entraînement 1-1/2 pouce, 130 mm - Pièce individuelle robuste pour usage industriel - 912130 -
Douille à choc longue 1/2" Teng Tools métrique 10-24 mm - Douille à choc longue individuelle conforme aux normes ANSI pour outils électriques - Choisissez votre taille -
Douille à chocs métrique Teng Tools 1/4", 6-13 mm, norme ANSI — Pièce de rechange individuelle pour clés et visseuses à chocs -
Teng Tools Heavy Wheel Nut Set, 25 to 250 ft-lb Torque Wrench, 600 mm Breaker Bar and 16 Piece 1/2 Inch Metric Impact Socket Set - BDL-WHEEL-TRUCK -
Teng Tools Impact Socket Retaining Pin 4 x 33 to 6 x 110 mm - Individual Pin for DIN Impact Sockets, Use With a Retaining Ring - Choose Your Size -
Teng Tools Impact Socket Retaining Ring 19 x 4 to 115 x 10 mm - Individual Ring for DIN Standard Impact Sockets and Accessories - Choose Your Size -
Teng Tools 1/2 Inch Drive XZN Triple Square Impact Socket M14-M18, 78 mm Long - Individual DIN Impact Bit Socket, Chrome Molybdenum - Choose Your Size -
Teng Tools 1/2 Inch Drive Torque Stick 90 to 140 Nm - Individual Torque Limiting Extension for Wheel Nuts with an Air Gun - Choose Your Size -
Teng Tools 1/2 Inch Drive Torx Impact Socket TX10 to TX70 DIN - Chrome Molybdenum, Black Phosphate, Pin and Ring Fixing - Choose Your Size -
Teng Tools 1/2 Drive Metric DIN XZN Triple Square Impact Socket M14-M18 - Individual Sizes - Choose Your Size
Common questions
What makes an impact socket different from a regular socket?
Material and rating. Impact sockets are made from CrMo (chrome molybdenum) steel to absorb the hammering of pneumatic and power tools. Regular chrome sockets must never be used on impact tools — that's the first rule in the printed care guide.
What sizes and types are available?
Drives from 3/8" up to 1-1/2", in metric and SAE, with standard, deep, stubby, thinwall, extra long and double-ended types — for 6-point, Hex, TX and XZN (triple square) fasteners. Manufactured to DIN and ANSI standards.
Do I need a retaining ring and pin?
On DIN-standard impact sockets, yes — the retaining ring and pin safely secure the socket to the impact tool. Fit them before use.
How do I make impact sockets last?
Keep them clean and dry, use the correct size for the fastener, and never extend the tool with a pole for leverage.
Les valeurs de couple et les instructions d'étalonnage proviennent du catalogue Teng Tools. Toujours suivre les spécifications de couple du fabricant de la fixation.