Douilles à chocs
CHROME MOLYBDENUM STRENGTH FOR POWER TOOL USE
Impact sockets in 3/8, 1/2, 3/4 and 1 inch drive, metric and SAE, regular and deep, in chrome molybdenum, plus impact adaptors and impact bits. Teng Tools impact sockets are manufactured from heavy duty chrome molybdenum (CR-MO) steel, delivering the exceptional strength and flexibility required for use with pneumatic and power tools.
Black Phosphate Finish
The black phosphate finish provides instant visual identification as an impact-rated accessory and gives maximum protection against corrosion and wear.
6 Point High Torque
The 6 point high torque design grips the flat sides of a fastener rather than the corners, reducing the risk of rounding off even under high load. Roll stamped size markings ensure permanent and instant identification in any working environment.
Range & Standards
Available in metric and SAE, shallow and deep, across a full range of drive sizes. Manufactured to ANSI and DIN standards.
-
Teng Tools Tractor Wheel Nut Socket Set, 9 Pieces: 1 Inch Drive Impact Sockets 32, 33, 36, 41, 46 mm, Ratchet Head, Power Bar, Extension, Adaptor -
Teng Tools 1/2 Inch Drive Large SAE Deep Impact Socket Set, 8 Pieces: 15/16 to 1-1/2 Inch Sockets, 10 Inch Extension, 25-250 ft-lb Torque Wrench -
Teng Tools Large Hex Nut Impact Socket Kit, 7 Pieces: 1 Inch Drive Metric Sockets 36, 41, 46, 50 and 55 mm, Extension, Breaker Bar -
Teng Tools Suspension Socket Kit, 13 Pieces: 1/2 Inch Deep Impact Sockets 13, 15, 17, 18, 19, 21, 22, 24, 27 mm, Breaker Bar, Ratchet, Torque Wrench -
Teng Tools Large Wheel Nut Impact Socket Kit, 5 Pieces: 1 Inch Drive 32 and 33 mm Deep Sockets, 33 mm Thin Wall Socket, Extension, Breaker Bar -
Teng Tools SAE Anchor Bolt Torque Kit, 7 Pieces: Deep Impact Sockets 9/16, 3/4, 15/16, 1-1/8, 1-1/2 Inch, Extension, 25 to 250 ft-lb Wrench -
Teng Tools 1 Inch Drive Deep Impact Socket and Ratchet Kit, 7 Pieces: 27, 30, 32 and 33 mm Sockets, Ratchet Head, 22 Inch Power Bar, 200 mm Extension -
Teng Tools Seized Fastener Removal Kit, 25 Pieces: Manual Impact Driver Set, Screw Extractors, Nut Splitters, Stud Extractor, Strike Cap Screwdrivers -
Teng Tools Seized Fastener Removal Kit, 20 Pieces: Manual Impact Driver Set, Extractors, Nut Splitters, Strike-Through Screwdrivers, Hammer, Pliers -
Teng Tools 1/2 Inch Drive SAE Hex Bit Impact Socket Set, 10 Pieces: Sockets 3/16 to 3/4 Inch for Socket Head Cap Screws -
Teng Tools Brake Caliper and Bracket Socket Kit, 13 Pieces: 1/2 Inch Drive Deep Impact Sockets 13 to 19 and 21 mm, Ratchet, Breaker Bar, Torque Wrench -
Teng Tools 1/2 Inch Drive Impact Extension Bar 75, 125 or 250 mm - DIN Female to ANSI Male, Chrome Molybdenum - Choose Your Size -
Teng Tools Light Truck and Trailer Wheel Nut Set, 25 to 250 ft-lb Torque Wrench, 600 mm Breaker Bar, 16 Impact Sockets 1/2 Inch - BDL-WHEEL-TRUCK -
Teng Tools Impact Socket Retaining Pin 4 x 33 to 6 x 110 mm - Individual Pin for DIN Impact Sockets, Use With a Retaining Ring - Choose Your Size -
Teng Tools Impact Socket Retaining Ring 19 x 4 to 115 x 10 mm - Individual Ring for DIN Standard Impact Sockets and Accessories - Choose Your Size -
Teng Tools 1/2 Inch Drive XZN Triple Square Impact Socket M14-M18, 78 mm Long - Individual DIN Impact Bit Socket, Chrome Molybdenum - Choose Your Size -
Teng Tools 1/2 Inch Drive Torque Stick 90 to 140 Nm - Individual Torque Limiting Extension for Wheel Nuts with an Air Gun - Choose Your Size -
Teng Tools 1/2 Inch Drive Torx Impact Socket TX10 to TX70 DIN - Chrome Molybdenum, Black Phosphate, Pin and Ring Fixing - Choose Your Size -
Teng Tools 1/2 Drive Metric DIN XZN Triple Square Impact Socket M14-M18 - Individual Sizes - Choose Your Size -
Teng Tools 3/4 Drive 6-Point SAE DIN Deep Impact Socket 3/4 to 1-7/8 in - Individual Sizes - Choose Your Size -
Teng Tools 3/4 Drive 6-Point SAE DIN Impact Socket 11/16 to 2-3/8 in - Individual Sizes - Choose Your Size -
Teng Tools 1/2 Drive SAE DIN Hex Bit Impact Socket 3/16 to 3/4 in - Individual Sizes - Choose Your Size -
Teng Tools 1/2 Drive 6-Point SAE DIN Impact Socket 3/8 to 1-1/4 in - Individual Half Inch Drive Impact Socket Sold Separately - Choose Your Size -
Teng Tools 1/2 Drive 6-Point SAE DIN Deep Impact Socket 3/8 to 1-1/2 in - Individual Sizes - Choose Your Size
Common questions
What makes an impact socket different from a regular socket?
Material and rating. Impact sockets are made from CrMo (chrome molybdenum) steel to absorb the hammering of pneumatic and power tools. Regular chrome sockets must never be used on impact tools — that's the first rule in the printed care guide.
What sizes and types are available?
Drives from 3/8" up to 1-1/2", in metric and SAE, with standard, deep, stubby, thinwall, extra long and double-ended types — for 6-point, Hex, TX and XZN (triple square) fasteners. Manufactured to DIN and ANSI standards.
Do I need a retaining ring and pin?
On DIN-standard impact sockets, yes — the retaining ring and pin safely secure the socket to the impact tool. Fit them before use.
How do I make impact sockets last?
Keep them clean and dry, use the correct size for the fastener, and never extend the tool with a pole for leverage.
Les valeurs de couple et les instructions d'étalonnage proviennent du catalogue Teng Tools. Toujours suivre les spécifications de couple du fabricant de la fixation.