Trade Tool Kits
Kits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.
-
Teng Tools Machinist T-Handle Ball Point Hex Key Set, 10 Pieces: Metric 2, 2.5 to 8, 10 and 12 mm, 7 Piece Set in Tray Plus Three Single Keys -
Teng Tools Fan Blade Set Screw Kit, 8 Pieces: T-Handle Hex Keys 5/32 to 5/16 Inch, 1/2 Inch Drive Hex Bit Sockets 1/4, 5/16, 3/8 Inch, Breaker Bar -
Teng Tools High Leverage Sheet Metal Snip Set, 3 Pieces: Straight, Left and Straight, Straight and Right Cut Snips -
Teng Tools Drum Brake Hammer and Pry Bar Kit, 8 Pieces: 1500 g Dead Blow, Pin Punch, Chisel, Pry Bars, Nipper, Pin Puller, 7/16 Wrench -
Teng Tools Control Wiring Crimp and Strip Kit, 129 Pieces: 121 Piece Terminal Kit, Ratcheting Crimper, Stripper, Cutters, Pliers, Tester -
Teng Tools Mill Drawbar Kit, 5 Pieces: 1/2 Inch Sliding T-Bar, 17, 19 and 22 mm 6 Point Sockets, Soft Face Hammer -
Teng Tools Welding Fit-Up Clamp Kit, 11 Pieces: Locking C Clamps, Welding Clamp, Locking Pliers, Welding Magnets, 500 mm Screw Clamps -
Teng Tools Metric Hydraulic Fitting Wrench Kit, 12 Pieces: Combination Wrenches 14, 17, 19, 22, 24 to 36 and 41 mm, 300 mm Adjustable Wrench -
Teng Tools Bike Shop Torque Screwdriver and Key Kit, 54 Pieces: 1/4 Inch Drive 1-5 Nm Torque Screwdriver Set, 9 Ball Point Hex Keys, 7 Torx Keys -
Teng Tools Control Panel Wiring Kit, 8 Pieces: Ratcheting Crimper, 24 to 10 AWG Wire Stripper, Side Cutter, Flat Nose Pliers, Four Screwdrivers -
Teng Tools Chainsaw and Trimmer Service Kit, 10 Pieces: T-Handle Torx TX20 to TX30, 4 and 5 mm Hex, 13 and 19 mm Wrenches, 10 mm Nut Driver -
Teng Tools Aluminum and Chain Pipe Wrench Set, 4 Pieces: 450 mm (18 in) and Two 600 mm (24 in) Aluminum Pipe Wrenches, Chain Pipe Wrench -
Teng Tools 3/8 Drive Torque Wrench and SAE Deep Socket Kit, 4 Pieces: 15 to 80 ft-lb Wrench, Sockets 3/4, 13/16 and 7/8 Inch -
Teng Tools Rigid Conduit Pipe Wrench and Cutting Kit, 7 Pieces: 300, 450 and 600 mm Aluminum Pipe Wrenches, Hacksaw, Blades, Deburring Tool -
Teng Tools Compound Action Bolt Cutter Set, 5 Pieces: 14, 18, 24, 30 and 36 Inch (350, 450, 600, 750 and 900 mm) -
Teng Tools Sheet Metal Snip and Locking Pliers Kit, 9 Pieces: Left Cut Snip, Sheet Metal Pliers, C Clamp Pliers, Nut Setters, Flat File -
Teng Tools Dowel Pin Punch and Hammer Kit, 8 Pieces: Parallel Pin Punches 3 to 8 mm, 12 oz Ball Pein Hammer, Soft Face Hammer -
Teng Tools Three Way Oil Filter Removal Kit, 5 Pieces: 160 mm Strap Wrench, Filter Pliers, 120 mm Chain Wrench, Gasket Scraper, Magnetic Tray -
Teng Tools Pulley and Bearing Puller Kit, 7 Pieces: 140 x 100 mm Two Arm Puller, Four SAE T-Handle Hex Keys, Snap Ring Pliers -
Teng Tools Hinge Pin Punch and Hammer Kit, 9 Pieces: 3 to 8 mm Parallel Pin Punches, 500 g Engineers Hammer, 750 g Dead Blow, 550 mm Pry Bar -
Teng Tools Off-Road Bike Torx and Hex T-Handle Kit, 17 Pieces: Torx Keys TX10 to TX30 and TX40 to TX50, 2.5 to 8 mm and 10 mm Ball Point Hex Keys -
Teng Tools Tractor Wheel Nut Socket Set, 10 Pieces: 1 Inch Drive Impact Sockets 32-46 mm, Torque Wrench, Ratchet Head, Power Bar, Extension, Adaptor -
Teng Tools Insulated Electrical Terminal Tool Kit, 10 Pieces: 3/8 Inch Drive Ratchet, Extension, 8, 10, 11 and 13 mm Sockets, Screwdrivers, Pliers -
Teng Tools Plumbing Fixture Service Kit, 43 Pieces: Hex Keys, Screwdrivers, 300 and 180 mm Water Pump Pliers, 150 and 200 mm Adjustables, Picks
