Trade Tool Kits
Kits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.
-
Teng Tools Appliance Torx and Tamper Proof Screwdriver Kit, 19 Pieces: 12 Piece TX6 to TX45 Set, Seven TPX Drivers TPX10 to TPX40 -
Teng Tools Metric Module Clamp Torque Kit, 7 Pieces: 1/4 Inch Drive 5 to 25 Nm Torque Wrench, 10 and 13 mm Sockets, 5 and 6 mm Hex Bit Sockets -
Teng Tools 1 Inch Drive Flange Nut Kit, 6 Pieces: 65 and 70 mm Sockets and Slogging Wrenches, 990 mm Breaker Bar, 200 to 1000 ft-lb Torque Wrench -
Teng Tools Servo Coupling and Set Screw Kit, 19 Pieces: 1 to 5 Nm Torque Screwdriver, 2 and 3 mm Hex Bits, Ball Point Hex Keys, Magnet Retriever -
Teng Tools Tower Flange Bolt Run-Down Kit, 10 Pieces: 3/4 Inch Drive Ratchet Set, Step-Up Adaptor, 60, 75 and 80 mm 1 Inch Sockets, Slogging Wrenches -
Teng Tools Fan and Pump Bearing Kit, 14 Pieces: Two Arm 330 x 200 mm Puller, Hook Wrenches, 4, 5 and 6 mm Pin Wrenches, Circlip Pliers 19 to 100 mm -
Teng Tools Metric Machine Guard Bolt and Nut Kit, 62 Pieces: 49 Piece 1/4 Inch Drive Bit and Socket Set, Ring and Flex Wrenches, Ball Point Hex Keys -
Teng Tools Low Range Imperial Cap Screw Torque Kit, 5 Pieces: 1/4 Inch Drive 5 to 25 Nm Torque Wrench, 3/8 Inch Drive Hex Bit Sockets 1/8 to 3/16 Inch -
Teng Tools Recoil Starter Rope Kit, 7 Pieces: Locking and Bent Long Nose Pliers, 9 mm Knife, 10 mm, 3/8 and 5/16 in Wrenches, Flat Screwdriver -
Teng Tools RV Onboard Kit, 67 Pieces: 1/4 Inch Drive SAE Sockets 3/16 to 1/2 Inch, 28 Piece Bit Set with Robertson, Water Pump and Locking Pliers -
Teng Tools Thread Repair Kit With 26 Inch Cabinet Tray, 35 Pieces: M3 to M12 Taps and Dies, 12 Needle Files, 5 Hand Files -
Teng Tools 1000 V Insulated HV Connector Kit, 8 Pieces: Slotted 2.5, 3.0 and 3.5 mm, 4 Piece PH and PZ Screwdriver Set, 160 mm Insulated Side Cutters -
Teng Tools Instrument Terminal Driver Kit, 14 Pieces: 1000 V Insulated Flat 3.0 and 3.5 mm, PZ0, PZ1, Plus Minus Driver, Precision Set, Side Cutters -
Teng Tools Metric Hydraulic Fitting Wrench Kit, 17 Pieces: Double Open End Wrenches 6 x 7 to 20 x 22 mm, 7 Large Combination Wrenches, Pliers Set -
Teng Tools Fire Pump Panel Service Kit, 46 Pieces: 3/8 Inch Drive SAE Socket Set, 7 SAE T-Handle Hex Keys, Screwdrivers, Pliers, Adjustable Wrench -
Teng Tools Metric Conveyor Take Up Kit, 10 Pieces: 24 and 27 mm Ratcheting Wrenches, 7 Combination Wrenches to 32 mm, 5 m Tape -
Teng Tools Metric Truss Bolting Kit, 20 Pieces: 18, 19, 21, 22, 24 mm 1/2 Inch Drive Sockets, Wrenches, 5 to 17 mm Hex Bit Sockets, Flex Handle -
Teng Tools Yaw and Pitch Drive Motor Kit, 16 Pieces: 1/2 Inch Drive Deep Sockets 10 to 19 mm, Extra Long Hex 8 and 10 mm, Flex Handle -
Teng Tools EV Underbody Shield Kit, 81 Pieces: 1/4 and 3/8 Inch Drive Metric Sockets, Torx Bit Sockets, TX-E Sockets, Clip Removers -
Teng Tools Packaging Line Changeover Kit, 26 Pieces: 23 Piece T-Handle Hex, TX and Nut Driver Set, 10 mm Long Hex Key, Two Double Flex Wrenches -
Teng Tools RV Interior Screw Kit, 77 Pieces: 74 Piece Ratcheting Bit Driver Set, #2 Square and PH1 Screwdrivers, Magnetic Tray -
Teng Tools Sheave and QD Bushing Change Kit, 22 Pieces: 1/2 Inch Drive Impact Sockets, Sliding T-Bar, Hex Keys 1/8 to 3/8 Inch, Hex Bit Sockets -
Teng Tools Cabinet Hinge and Drawer Adjustment Kit, 67 Pieces: 64 Piece Angled Ratcheting Bit Driver, PZ2 and PH2 Screwdrivers, Slotted Screwdriver -
Teng Tools Trim Removal and Reset Kit, 5 Pieces: 16 oz Claw Hammer, 450 mm Pry Bar, 180 mm Carpenter's Plier, 200 mm End Nipper, 9 mm Snap Off Knife
