Trade Tool Kits
Kits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.
-
Teng Tools DC Charger Cable Lug Torque Kit, 20 Pieces: 1/4 Inch 40 to 250 in-lb and 3/8 Inch 20 to 110 Nm Torque Wrenches, Sockets, Cable Cutter -
Teng Tools Sideshifter Hook Bolt Kit, 11 Pieces: 1/2 Inch Drive Torque Wrench 60 to 320 Nm, Flex Handle, Sockets, Pry Bar -
Teng Tools Appliance 1/4 Inch Drive Socket and Bit Kit, 34 Pieces: Palm Ratchet, Metric 4 to 13 mm and SAE Sockets, Torx and Phillips Bits -
Teng Tools Small Engine Spark Plug Kit, 10 Pieces: 3/8 Inch Drive Plug Sockets 14, 16, 21 mm, Flex Plug Sockets, Flex Ratchet, Gauge -
Teng Tools Tracker Drive Bolt Kit, 5 Pieces: 140 to 980 Nm Torque Wrench, 24 and 30 mm Sockets, Extension, Ratcheting Spud Wrench -
Teng Tools Collision EV Disable Kit, 11 Pieces: Insulated Plier and Knife Set, 10 and 13 mm Insulated Wrenches, 4 mm Insulated Flat Screwdriver -
Teng Tools Mobile Tire Service Kit, 27 Pieces: 1/2 Inch Drive Impact Sockets, Sleeved Wheel Nut Sockets 17, 19, 21 mm, Torque Wrench, Breaker Bar -
Teng Tools Metric Woodworking Machine Setup Kit, 62 Pieces: 39 Piece 3/8 Inch Drive Socket Set, Wrenches 8 to 19 mm, Hex Keys, Caliper, Feeler Gauge -
Teng Tools Ground Mount Racking Bolt Kit, 21 Pieces: 1/2 Inch Drive Deep Impact Sockets 7/16 to 1 Inch, Ratchet, Torque Wrench, Tape -
Teng Tools VFD Lug and Busbar Kit, 26 Pieces: 18 Piece Insulated Socket Set, 5 Insulated Open End Wrenches, Insulated Pliers, Torque Wrench -
Teng Tools Prox Sensor Lock Nut Wrench Kit, 14 Pieces: 13, 17 and 24 mm Wrenches, Adjustable Wrench, Nut Driver, Hex Keys -
Teng Tools Exhaust Clamp and Tailpipe Kit, 10 Pieces: Air Saw, Chain Pipe Cutter, 3/8 in Ratchet, Deep Sockets 7/16 to 9/16, 11/16, 3/4 in, 13, 15 mm -
Teng Tools ISO 15552 Cylinder Rod End Wrench Kit, 17 Pieces: Open End Wrenches 6 x 7 to 20 x 22, 24 x 27 and 30 x 32 mm, Mini Hex Keys 0.9 to 4 mm -
Teng Tools Back Plate Drill and Tap Kit, 38 Pieces: 34 Piece M3 to M12 Tap and Die Set, Center Punch, Scriber, Deburring Tool, Steel Rule -
Teng Tools Ring Terminal Crimp and Nut Driver Kit, 7 Pieces: 1000 V Stripping Plier, M2.5 to M5 Crimping Plier, Flush Cutter, 4 Nut Drivers -
Teng Tools SAE Module Clamp and Microinverter Swap Kit, 73 Pieces: 60 Piece 1/4 Inch Drive Socket Set, 40 to 250 in-lb Torque Wrench, Hex Keys -
Teng Tools Line Blind Swing Kit, 16 Pieces: Pry Bar Set, 1-1/16 and 1-1/4 Inch Impact Sockets, Wrenches, Flex Handle, Torque Wrench -
Teng Tools Electric Dryer No Heat Repair Kit, 8 Pieces: Multimeter, 1/4 Inch Drive 1/4 and 5/16 Inch Sockets, Phillips Driver, Pliers, Torch -
Teng Tools Trailer Hub, Bearing and Drum Brake Kit, 9 Pieces: 1/2 Inch Drive Torque Wrench 10 to 150 ft-lb, 13/16 Inch Socket, Pliers, Hammer -
Teng Tools 1/2 and 3/4 Inch Drive Valve Actuator Torque Kit, 13 Pieces: 40 to 200 Nm and 50 to 300 ft-lb Torque Wrenches, 16 to 19 and 24 mm Sockets -
Teng Tools Nacelle Service Backpack Kit, 109 Pieces: Backpack, 10 Ratcheting Wrenches, 78 Piece 1/4 Inch Bit Set, Screwdrivers, Hex Keys, Headlamp -
Teng Tools Appliance Tech Bag Kit, 127 Pieces: Tool Bag, 84 Piece 1/4 Inch Socket and Bit Set, SAE Sockets 3/16 to 3/4 Inch, TX Screwdrivers, Pliers -
Teng Tools Hybrid Battery Cooling Fan Service Kit, 9 Pieces: 3/8 Inch Ratchet, 10, 12 and 14 mm Sockets, Extensions, Clip Remover, Bit Driver, PH2 Bit -
Teng Tools Metric Small Engine Cylinder Head Kit, 37 Pieces: 1/4 Inch Drive Socket Set, 3/8 and 1/2 Inch Torque Wrenches 20 to 210 Nm, Scrapers
