Teng Tools Sideshifter Hook Bolt Kit, 11 Pieces: 1/2 Inch Drive Torque Wrench 60 to 320 Nm, Flex Handle, Sockets, Pry Bar

Servicing a hook mount sideshifter or fork positioner means breaking the lower hook bolts loose, levering the attachment to reach the wear pads, refitting the hooks and torquing the hook bolts to the attachment manual value. This kit has a 1/2 inch drive torque wrench, a flex handle, an extension bar, SAE and metric sockets, an 8 mm hex bit socket and a roll heel pry bar.

Covers hex head lower hook capscrews in M12, M16, M20, 1/2 and 5/8 inch at up to 320 Nm. Check your attachment manual for the hook bolt size, head style and torque. A torque above 320 Nm needs a higher range wrench, socket head capscrews need a hex bit socket of the right size, and shim capscrews set below 60 Nm need a smaller torque wrench.

In this bundle:

• 1/2 inch drive torque wrench, 60 to 320 Nm (1292P320)
• 1/2 inch drive flex handle (M120012-C)
• 1/2 inch drive impact extension bar, 250 mm (10 in) (920023N)
• 1/2 inch drive 12 point SAE socket: 3/4", 15/16" (M120124-C, M120130-C)
• 1/2 inch drive metric impact socket: 18 mm, 19 mm, 24 mm (920518AN, 920519AN, 920524AN)
• 1/2 inch drive metric hex bit socket (M121508-C)
• Roll heel pry bar with tapered podger handle (PB12)
• 1/2 inch drive 6 point metric shallow socket (M1205306-C)

Every item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.