Teng Tools Converter Module Torque Kit, 8 Pieces: 1/4 Inch Drive 1 to 25 Nm Torque Set, 4 to 6 mm Hex Bits, 10 and 13 mm Sockets

Torque control for power module hardware, in one order. A 1/4 inch drive torque set that runs 1 to 25 Nm across a torque screwdriver and a torque wrench, 4, 5 and 6 mm hex impact bits with a square to hex coupler, and a 10 mm deep socket and a 13 mm impact socket.

Check the module datasheet for screw sizes and torque values. The torque screwdriver starts at 1 Nm, so driver board screws set below 1 Nm need a low range driver, and M5 hex head screws need an 8 mm socket. These are not insulated tools: use them only on an isolated converter with the DC link discharged and proven dead.

In this bundle:

• 2 piece 1/4 inch drive torque set: torque screwdriver and torque wrench in a foam tray (TEZSD02)
• 1/4 inch square drive to 1/4 inch hex bit coupler (M140060-C)
• Metric hex impact bits, 30 mm (1.2 in), 1/4 inch hex shank: 4 mm, 5 mm, 6 mm (HEXP3000401, HEXP3000501, HEXP3000601)
• 1/4 inch drive 12 point metric deep socket (M14061012-C)
• 1/4 inch drive metric impact socket (960513-C)

Every item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.