Teng Tools Large Lug Set Screw Torque Kit, 6 Pieces: 1/2 Inch Drive 40 to 200 Nm Torque Wrench, Ratchet, 3/8, 1/2 and 9/16 Inch Hex Bit Sockets

Large feeder lugs use hex socket set screws, and where the lug marks a torque value you tighten to it. This kit has the click torque wrench for the final figure, a ratchet to run the screws down, a short extension for recessed screws and hex bit sockets for 3/8, 1/2 and 9/16 inch hex, all on 1/2 inch drive.

Lug markings are usually in inch pounds and the wrench reads in Nm (1 inch pound is 0.113 Nm, so 375, 500 and 600 inch pounds are about 42, 56 and 68 Nm), so convert the marked value first. The kit covers 3/8, 1/2 and 9/16 inch hex set screws. Lugs with 5/16 inch or smaller hex screws need less torque than this wrench's 40 Nm low end, so check the lug's marking.

In this bundle:

• 1/2 inch drive click type torque wrench, 40 to 200 Nm, 72 teeth (1292P200)
• 1/2 inch drive 72 tooth mini ratchet with IP5X dust protection (1200-72U)
• 1/2 inch drive impact extension bar (920020N)
• 1/2 inch drive hex bit impact sockets: 3/8 inch, 1/2 inch, 9/16 inch (921612, 921616, 921618)

Every item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.