Teng Tools Plumber Set - 450 mm (17.7 inch) and 300 mm (11.8 inch) Aluminum Pipe Wrenches, Water Pump Plier, Copper Pipe Cutter - BDL-PLUMBER

Two aluminum pipe wrenches of different lengths, 450 mm and 300 mm (17.7 and 11.8 inch), so one holds while the other turns, a 400 mm (15.7 inch) water pump plier for fittings and nuts, and a tube cutter for copper pipe up to 1-1/4 inch. This bundle puts the four Teng Tools products a plumber or pipefitter reaches for first into one order.

In the box:

• PWC18: aluminum pipe wrench, 450 mm (17.7 inch), steel jaws, pipe capacity 60 mm (2-23/64 inch).
• PWC12: aluminum pipe wrench, 300 mm (11.8 inch), steel jaws, pipe capacity 43 mm (1-11/16 inch).
• MB416: groove joint water pump plier, 400 mm (15.7 inch), chrome vanadium, 90 mm (3.5 inch) maximum opening.
• TF30: copper and brass tube cutter, 3 to 32 mm (1/8 to 1-1/4 inch), built-in reamer, spare blade.

Both wrenches use an aluminum body with steel jaws and an adjustment thread, so they set with one hand, and both carry a tethering facility for working at height. Using two different lengths is deliberate: the longer wrench gives leverage on the turning side, the shorter one holds in the space that is left.

The MB416 has serrated jaws and non-slip groove joints that can be adjusted under load, with a polished chrome vanadium head and a vinyl grip. The TF30 cuts with one wheel against two rollers for a straight edge, then the reamer in its frame cleans up the burr before the fitting goes on.

Each item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

• TWO WRENCHES, TWO LENGTHS (PWC18, PWC12) — A 450 mm (17.7 inch) and a 300 mm (11.8 inch) aluminum-bodied wrench, so on a joint one holds the fitting while the other turns the pipe. Each adjustable pipe wrench has steel jaws and an adjustment thread for one-hand operation, and a tethering facility for work at height. The light aluminum body keeps the weight down over a long day.
• CAPACITY BY SIZE — The 450 mm PWC18 takes pipe up to 60 mm (2-23/64 inch) in diameter and weighs 1390 g (3.1 lb). The 300 mm PWC12 takes pipe up to 43 mm (1-11/16 inch) and weighs 670 g (1.5 lb), the shorter of the two for tighter runs. Pipe wrenches for plumbing and industrial pipework, sized as a working pair rather than two of the same.
• 400 MM WATER PUMP PLIERS (MB416) — Groove joint pliers for fittings and nuts: 400 mm (15.7 inch) overall, serrated jaws with a 90 mm (3.5 inch) maximum opening and a 60 mm jaw depth, non-slip groove joints that adjust under load, chrome vanadium with a polished head, and a vinyl grip. Weight 1135 g (2.5 lb).
• COPPER TUBE CUTTER (TF30) — A copper tubing cutter for copper and brass pipe from 3 to 32 mm (1/8 to 1-1/4 inch). One cutting wheel and two rollers give a consistent, straight cut, a retractable reamer built into the frame deburrs the rough edge afterward, and a spare blade is included. Weight 268 g (9.5 oz).
• FOUR TOOLS, ONE PLUMBING JOB — Cut the copper with the TF30, deburr it with the built-in reamer, hold the run with one plumbing wrench while the other turns, and take fittings and nuts with the groove joint plier. Four standard Teng Tools products shipped together from Fort Worth, Texas, with a lifetime warranty against manufacturing defects on Teng Tools hand tools.

Part number: BDL-PLUMBER