Teng Tools Electrician Starter Set - 1000V Insulated Pliers, VDE Screwdrivers and Insulated Torque Screwdriver 1-5 Nm - BDL-ELEC-START

An electrician needs insulated pliers and insulated screwdrivers, and terminal screws are tightened to a specified torque. This Teng Tools starter bundle covers all three in one order: a 1000V plier set, a 1000V VDE screwdriver set and an insulated adjustable torque driver. Every item is approved for live working up to 1000 volts and manufactured to IEC 60900.

What is in the box:

• TTV440: 4-piece 1000V insulated pliers in a TT1 tray. Side cutting 160 mm, combination 185 mm, long nose 215 mm and a wire stripping plier, with TPR grips.
• TTDV910N: 10-piece 1000V VDE electrical screwdrivers in a TT2 tray. Four slotted, three Phillips (PH0 to PH2) and three Pozidriv (PZ0 to PZ2), with bi-material handles.
• 1492TVSD: 1/4 inch drive 1000 volt insulated torque driver, adjustable from 1 to 5 Nm.

Why these three go together: the pliers cut, grip and strip the conductor, the screwdrivers handle general terminal work, and the torque driver lands the final setting where a specified torque applies. Where torque is specified in inch pounds, the 1 to 5 Nm range equals 8.9 to 44.3 inch pounds. A slipper mechanism stops the driver applying torque beyond the set value, and a push lock keeps the setting from drifting between jobs.

The two trays are TT module sizes 1 and 2, so they sit side by side in a Teng Tools drawer. The torque driver takes Teng Tools VDE interchangeable blades, which are not part of this bundle.

Each item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

• THREE 1000V PRODUCTS FOR TERMINAL WORK — An electrician needs insulated pliers and screwdrivers, and terminal screws are tightened to a specified torque. This bundle puts the TTV440 4-piece plier set, the TTDV910N 10-piece VDE screwdriver set and the 1492TVSD insulated adjustable torque driver in one order. Every item is approved for live working up to 1000 volts and manufactured to IEC 60900.
• ELECTRICAL PLIERS FOR CUT, GRIP AND STRIP — The TTV440 holds a 160 mm (6.3 inch) side cutting plier, a 185 mm (7.3 inch) combination plier, a 215 mm (8.5 inch) long nose plier and a wire stripping plier. Each is individually VDE tested for 1000 V live working, made to DIN 5745, DIN 5746 and DIN 5749, with TPR grips for a secure, comfortable hold. The set sits in a TT1 module tray and weighs 987 g (2.2 lb).
• 1000V INSULATED SCREWDRIVER SET, FLAT, PH AND PZ — The TTDV910N gives four slotted drivers in 0.4x2.5, 0.5x3.0, 0.8x4.0 and 1.0x5.5, three Phillips PH0, PH1 and PH2 and three Pozidriv PZ0, PZ1 and PZ2. Blades are TT-MV PLUS alloy steel with hardened tips, and two-colour integrated insulation shows clearly if it is damaged. Made to DIN ISO 2380 and DIN ISO 8764-1, in a TT2 module tray.
• SET TORQUE, THEN STOP — The 1492TVSD is a 1/4 inch drive insulated torque driver covering 1 to 5 Nm, which is 8.9 to 44.3 inch pounds. A slipper mechanism applies no torque beyond the set value, a push lock holds the setting, and the window scale reads in Nm. Accurate to plus or minus 6%, it conforms to ISO 6789 and is individually tested and certified at manufacture with its own certification number.
• SIZES AND SUPPLY — The torque driver is 213 mm (8.4 inch) long with an 82 mm (3.2 inch) shaft and weighs 222 g (7.8 oz). It takes Teng Tools VDE interchangeable blades; those blades are not part of this bundle. All three items are standard Teng Tools catalogue products, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

Part number: BDL-ELEC-START