Teng Tools T-Handle Hex Key Set and Torx Key Set - 7 Metric Ball Point Hex Keys 2.5-8 mm and 7 TX Keys TX10-TX40 in FOAM2 Trays - BDL-THANDLE

T-handle hex and Torx keys are the two drive types most machinery, bikes and modern vehicles mix together. This Teng Tools bundle puts both in one order, each set in a FOAM2 foam tray, side by side in a drawer.

What is in the box:

• TEDHEX7: 7-piece metric T-handle ball point hex keys in 2.5, 3, 4, 5, 6, 7 and 8 mm, in a FOAM2 tray.
• TEDTX7: 7-piece T-handle TX keys in TX10, TX15, TX20, TX25, TX27, TX30 and TX40, in a FOAM2 tray.

Why they go together: a job rarely stays with one drive type, and the T-handle gives the same reach and grip on hex and Torx screws alike. Buying the two as a pair means matching handles, matching trays and one place to look for either key.

The hex keys have a ball point on the long end for access at angles of up to 25 degrees and a regular hex end on the short arm for higher torque, and are manufactured to DIN ISO 2936. The TX keys carry a TPX end on the long arm for tamper proof TPX fastenings and a regular TX end on the short arm. Every key has an ergonomic TPR anti-slip grip and is held in three-colour pre-cut high-density EVA foam. For anyone who calls them allen keys, the hex tray is a metric T-handle allen key kit, and the TX tray is its Torx partner.

Each item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

• TWO DRIVE TYPES, ONE DRAWER — Hex and Torx are the two drive types most machinery, bikes and modern vehicles mix together. This bundle puts the TEDHEX7 7-piece metric T-handle ball point hex keys and the TEDTX7 7-piece T-handle TX keys into one order. Each set sits in its own FOAM2 foam tray, so the two trays lie side by side in a drawer and the right key for either drive is always in the same place.
• METRIC BALL POINT HEX KEYS, 2.5 TO 8 MM — Seven sizes: 2.5, 3, 4, 5, 6, 7 and 8 mm. On every T-handle hex key wrench in the tray, the ball point on the long end gives access at angles of up to 25 degrees for fasteners that are hard to reach square-on, while the regular hex end on the short arm lets you apply higher torque without damaging the fastener. Manufactured to DIN ISO 2936.
• STAR KEY SET, TX10 TO TX40 — Seven T-handle TX keys in TX10, TX15, TX20, TX25, TX27, TX30 and TX40. The long end carries a TPX tip for use with tamper proof TPX fastenings, and the short arm has a regular TX end for higher torque. With both ends on every key, one tray covers the standard and the tamper proof versions of the common TX sizes.
• TPR GRIPS AND PRE-CUT FOAM — Both sets have ergonomic thermoplastic rubber (TPR) anti-slip grips for comfortable turning. Every key is held in three-colour pre-cut high-density EVA foam in a FOAM2 module, 265 x 282 mm (10.4 x 11.1 inch) and 50 mm (2 inch) high, so each key has its own pocket and the trays drop straight into a tool chest drawer.
• WEIGHTS AND SUPPLY — The hex key tray weighs 1029 g (2.3 lb) and the TX key tray 892 g (2 lb). Both are standard Teng Tools catalogue products in the same FOAM2 module size, so they line up with other Teng Tools foam trays. Shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

Part number: BDL-THANDLE