Trade Tool Kits
Kits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.
-
Teng Tools Bed and Stretcher Frame Kit, 23 Pieces: 3/8 Inch Drive Deep Sockets 10, 13, 15, 17, 19 mm, Hex and Torx Bit Sockets, Wrenches, Hammer -
Teng Tools SAE Hydraulic Fitting Wrench Kit, 8 Pieces: Wrenches 9/16, 11/16, 7/8, 1, 1-1/4, 1-1/2 and 1-7/8 Inch, 300 mm Adjustable Wrench -
Teng Tools Tower Climber Wrench Kit, 6 Pieces: Ratcheting 9/16 and 3/4 Inch, Combination 15/16 and 1-1/8 Inch, 19 x 22 mm Spud, 300 mm Adjustable -
Teng Tools Insulated Battery and Wiring Kit, 7 Pieces: 3/8 Inch Drive 72 Tooth Ratchet, 8, 10, 13 mm Sockets, Extension, Wire Stripper, Circuit Tester -
Teng Tools Phillips Bit Driver Kit, 6 Pieces: PH1, PH2 and PH3 Bit Packs, Quick Chuck Holder, Magnetic Bit Driver, Mini Ratchet -
Teng Tools Tamper-Resistant Torx Kit, 21 Pieces: TPX10, TPX15, TPX25 and TPX30 Bits, 7 TX and TPX Screwdrivers, TX27 T-Handle, Magnetic Bit Driver -
Teng Tools Dead Blow Hammer Set, 3 Pieces: 750, 1275 and 1500 g Polyurethane Steel Ball Hammers -
Teng Tools Seized Fastener Removal Kit, 25 Pieces: Manual Impact Driver Set, Screw Extractors, Nut Splitters, Stud Extractor, Strike Cap Screwdrivers -
Teng Tools T-Handle Torx Key Set, 10 Pieces: TX10 to TX30 and TX40 to TX55 Keys, Seven in a TT1 Tray -
Teng Tools Copper Tube Cutting Kit, 9 Pieces: 3 to 32 mm Tube Cutter, Deburring Tool, Mini Hacksaw, 5 Spare Blades, 150 mm Adjustable Wrench -
Teng Tools Large Metric Hex Key Set 10, 12, 14, 17, 19 and 22 mm, 6 Pieces: Chrome Vanadium, Black Phosphate, Ground Ends, DIN 2936 -
Teng Tools Slogging Wrench and Lump Hammer Kit, 3 Pieces: 24 and 27 mm Open End Striking Wrenches, 1250 g Lump Hammer -
Teng Tools 1/2 Drive SAE 12 Point Socket and Breaker Bar Kit, 21 Pieces: Sockets 3/8 to 1-1/4 Inch, 72-Tooth Ratchet Set, 450 mm Breaker Bar -
Teng Tools Swivel and Non-Pinch Welding Clamp Kit, 4 Pieces: 172 and 280 mm Swivel C Clamp Pliers, 172 mm Non-Pinch C Clamp Plier, 500 mm F Clamp -
Teng Tools Rooftop Unit Service Kit, 48 Pieces: 1/4 Inch Drive Sockets, SAE Wrenches 5/16 to 3/4 Inch, Gear Pullers, Insulated Screwdrivers, Headlamp -
Teng Tools Oil Change and Drain Plug Kit, 40 Pieces: 3/8 Inch Drive Sockets and Ratchet, Drain Plug Keys, Oil Filter Pliers, Strap Tool, Magnetic Tray -
Teng Tools Fully Ground Drill Bit Set with Extra Packs, 53 Pieces: 28 Piece Set Up to 13 mm, One 10 Pack Each of 5.0 and 6.8 mm, One 8.5 mm 5 Pack -
Teng Tools Interior Trim Removal Kit, 27 Pieces: Panel Clip Removers, T-Handle Torx Keys TX10 to TX40, Picks, Magnetic Pickup, Bit Driver, 10 PH2 Bits -
Teng Tools Electrician Student Tool Kit, 147 Pieces: 1000 V Insulated Pliers, VDE Screwdrivers, Voltage Tester, 121 Piece Crimp Kit, Headlamp -
Teng Tools Gear and Bearing Puller Kit, 7 Pieces: 4 Piece Puller Set, 140 x 100 mm Two Arm Puller, Dead Blow Hammer, Snap Ring Pliers -
Teng Tools Metric Impact Socket and Breaker Bar Kit, 22 Pieces: 1/2 Inch Drive Regular and Deep Sockets, 600 mm Breaker Bar, Pry Bar, Hammer -
Teng Tools Torx Bit and E-Torx Socket Kit, 37 Pieces: TX10 to TX60 Bit Sockets and E-Torx Sockets on 1/4, 3/8 and 1/2 Inch Drive -
Teng Tools SAE Anchor Bolt Torque Kit, 7 Pieces: Deep Impact Sockets 9/16, 3/4, 15/16, 1-1/8, 1-1/2 Inch, Extension, 25 to 250 ft-lb Wrench -
Teng Tools Demolition Pry Bar and Chisel Kit, 5 Pieces: 550 mm Pry Bar, 400 mm Heel Bar, Cold Chisel, 1250 g Lump Hammer, Bolt Cutter
