Drill Bits & Saws
DRILL, CUT AND THREAD
Drill bits, saws and drilling accessories for metal, wood and plastic — from DIN-standard twist drill sets to hacksaws in metal and wood tooth counts, plus taps and dies in SK5 steel rated to 58 HRC for cutting and repairing threads. Sized for the workshop jobs that come up every day.
-
Teng Tools 150 mm Mini Hacksaw 24 TPI Metal Cutting Hand Saw for Tight Spaces — Compact Small Saw for Tradesmen - 705 -
Teng Tools 219-Piece General Service Mechanic Tool Kit - Torque Wrenches, Drill Bits, Taps, Dies, Rivet Gun, Nutsert Gun - TTEX219 -
Teng Tools 1/4 Inch Hex Flexible Bit Holder - 300 mm Bendable Screwdriver Bit Extension for Drill and Driver - ACC300CBH01 -
Teng Tools 9-Piece General Hand Tool Set — Wrenches, Hammers, Plier, Hacksaw, Knife, Tape & Rule in TT4 Tray - TTPS09E -
Teng Tools Gun Saw Set — 24 TPI Metal and 10 TPI Wood/Plastic Dual-Purpose Hand Saw, 300 mm Long, Pistol Grip Design -
Teng Tools 1/4 Inch Hex Drill Driver Bit Kit, 37 Pieces: PH2, PH3 and TX25 Bits, 8 mm Nut Setters, Quick Chuck Holder, 300 mm Flexible Holder -
Teng Tools Fabrication Bench Kit, 16 Pieces: 4 Inch Vise, 250 mm File Set, Hacksaw with Spare Blades, Hammer, Cold Chisel, Center Punch, Awl, Rule -
Teng Tools Hacksaw and Pipe Deburring Kit, 7 Pieces: 300 mm Hacksaw, Four Spare 24 TPI Blades, Deburring Tool, 250 mm Half Round File -
Teng Tools Thread Cutting Kit, 68 Pieces: M3 to M12 Tap and Die Set, 50 Metric Tap Drills in 5, 6.8 and 8.5 mm, 5 mm Center Punch -
Teng Tools Body Work Air Tool Kit, 3 Pieces: 245 mm Reciprocating Air Saw, 25,000 RPM Die Grinder, 100 mm Blow Gun -
Teng Tools M5 Thread Repair and Screw Extractor Kit, 17 Pieces: M5 x 0.8 Tap, T-Handle Tap Wrench, 4.2 mm Drills, 5 Piece Extractor Set -
Teng Tools Hole Layout and Drilling Kit, 25 Pieces: Steel Rule, Awl, Center Punch, 12 oz Ball Pein Hammer, 2.5 and 3.3 mm Drills, Deburring Tool -
Teng Tools Duct Riveting Kit, 103 Pieces: Pop Rivet Gun with 80 Rivets, 3.3 and 4.2 mm Drill Bits, 230 and 250 mm Flat Jaw Locking Pliers -
Teng Tools Fully Ground Metric Drill Bit Pack, 55 Pieces: DIN 338 Twist Drills 2.5, 3.3, 4.2, 5, 6.8 and 8.5 mm -
Teng Tools Copper Tube Cut and Deburr Kit, 10 Pieces: 3 to 32 mm and 3 to 22 mm Tube Cutters, Deburring Tool, Mini Hacksaw, Mirror -
Teng Tools Threaded Rod and Strut Hanger Kit, 16 Pieces: 3/8 Drive Ratchet, 7/16, 9/16, 3/4 Inch Deep Sockets, Ratcheting Wrenches, Hacksaw, Level -
Teng Tools Fully Ground Drill Bit Set with Extra Packs, 53 Pieces: 28 Piece Set Up to 13 mm, One 10 Pack Each of 5.0 and 6.8 mm, One 8.5 mm 5 Pack -
Teng Tools Copper Tube Cutting Kit, 9 Pieces: 3 to 32 mm Tube Cutter, Deburring Tool, Mini Hacksaw, 5 Spare Blades, 150 mm Adjustable Wrench -
Teng Tools Chainsaw and Trimmer Service Kit, 10 Pieces: T-Handle Torx TX20 to TX30, 4 and 5 mm Hex, 13 and 19 mm Wrenches, 10 mm Nut Driver -
Teng Tools Rigid Conduit Pipe Wrench and Cutting Kit, 7 Pieces: 300, 450 and 600 mm Aluminum Pipe Wrenches, Hacksaw, Blades, Deburring Tool -
Teng Tools Sheet Metal Cutting and Filing Kit, 11 Pieces: Right, Left and Long Cut Snips, Mini Hacksaw with 5 Spare Blades, Flat and Half Round Files -
Teng Tools Broken Bolt and Nut Removal Kit, 38 Pieces: Nut Splitter and Extractor Set, Bolt and Nut Extractors, 5 and 6.8 mm Drill Bits, Punch, Hammer -
Teng Tools Strut and Rod Hanger Spud Wrench Kit, 13 Pieces: 3/4 x 7/8 Inch Ratcheting Wrench, 1/2 Inch Drive Deep Impact Sockets, Hacksaw -
Teng Tools Boat SAE Tool Kit, 42 Pieces: Wrenches 5/16 to 3/4 Inch, Hex and TX Keys, Screwdrivers, Pliers, Hacksaw, Headlamp
Common questions
What standards are the drill bits made to?
Drill bit sets are manufactured to DIN standards (twist drills to DIN 338).
What are the taps and dies made of?
SK5 steel, rated to 58 HRC — taps manufactured to DIN 352 and dies to DIN 223.
How do I stop drill bits burning out in steel?
Slow down and lubricate. Larger bits need lower RPM; a drop of cutting fluid or oil on steel keeps the edge cool and the swarf flowing. Let the bit cut at its own pace — heavy pressure with high speed is what turns a bit blue and soft. Step up through a pilot hole for larger diameters.
How do I use a tap without snapping it?
Drill the correct tap-drill hole first (the tap packaging or a tap-drill chart gives the size per thread), keep the tap square to the hole, and cut with a back-off rhythm — half a turn forward, quarter turn back to break the chip. Cutting fluid on steel, and never force it: SK5 steel at 58 HRC is hard, and hard means brittle if bent.
What's the difference between a tap and a die?
A tap cuts internal threads (in a hole); a die cuts external threads (on a rod or bolt). Teng taps are made to DIN 352 and dies to DIN 223, both in SK5 steel.
Torque values and calibration guidance are from the Teng Tools catalogue. Always follow the fastener manufacturer's specified torque.