Automotive Tools
ESSENTIALS FOR ANY GARAGE
When working on motors and general servicing it is vital that you have the right tools ready when you are. Whether it is a spark plug socket or hose clamps you need tools that are great to work with and bring better results.
-
Teng Tools Trim & Panel Fastener Clip Removal Set 4 Pcs — TTSR04A -
Teng Tools Oil Filter Removal Tool Strap Type 160mm — 9123 -
Teng Tools Welding Magnet 90mm — MH90 -
Teng Tools Body Working Hammer, Crown Face/Point Pick — HMBH02 -
Teng Tools 1/2" Fuel Injector Socket 27mm — AT360 -
Teng Tools 1/2" Heated Lambda Oxygen Sensor Socket 7/8" — AT375 -
Teng Tools Magnetic Wing Cover — FC01 -
Teng Tools Hose Clamp 19 - 57mm — AT090 -
Teng Tools Chain Pipe Wrench — 9124 -
Teng Tools Body Working Hammer, Crown Face/Straight Pein — HMBH01 -
Teng Tools 1/2 Torque Sticks & Wheel Nut Set TT1 8 Pieces — TTTS08 -
Teng Tools 3/8 T-Bar Spark Plug Socket Set FOAMX4 5 Pieces — TEXTB05 -
Teng Tools Needle File Round Edge Flat — TTNF12-12 -
Teng Tools Needle File Square — TTNF12-04 -
Teng Tools Needle File Barrette — TTNF12-08 -
Teng Tools Needle File Oval — TTNF12-10 -
Teng Tools Needle File Crossing — TTNF12-09 -
Teng Tools Needle File Triangular — TTNF12-03 -
Teng Tools Hook & Pick Set 4 Pieces — TM149 -
Teng Tools Awl Square Tip Grey Handle — MDA-SQ -
Teng Tools Pipe Reamer 3 - 41mm — DBT41 -
Teng Tools Aluminium Pipe Reamer 8 - 35mm — DBT35 -
Teng Tools Aluminium Pipe Reamer 10 - 54mm — DBT54 -
Teng Tools Brake Disc Pad Puller 5mm — AT330
Common questions
What counts as an auto tool here?
The tools you want ready when working on motors and general servicing — spark plug sockets, hose clamp tools, brake and engine service tools. The range exists so the right tool is there when you are.
Does the hose clip driver fit common clips?
It fits most commonly used worm-drive hose clips (Jubilee-type), and the flexible shaft reaches clips buried in confined engine bays.
Are the impact accessories standard-compliant?
Yes — for example the 1/2" double-ended impact socket set includes a 75mm impact extension bar made DIN on the female end and ANSI on the male end, so it works both ecosystems.
Why do spark plugs need a special socket?
Spark plug sockets are deeper than standard sockets and hold the plug captive — typically with a rubber insert or magnet — so you can lower the plug into a deep well and start it by hand without dropping or cross-threading it. Common plug hex sizes are 5/8" (16mm) and 13/16" (21mm); check your engine's spec.
Should I torque wheel and engine fasteners?
Yes — critical automotive fasteners (wheel lugs, head bolts, suspension components) have manufacturer-specified torque values, and both under- and over-tightening cause failures. Use a torque wrench set to the vehicle manufacturer's specification; see our Torque Equipment range.
Torque values and calibration guidance are from the Teng Tools catalogue. Always follow the fastener manufacturer's specified torque.