Impact Sockets
CHROME MOLYBDENUM STRENGTH FOR POWER TOOL USE
Teng Tools impact sockets are manufactured from heavy duty chrome molybdenum (CR-MO) steel, delivering the exceptional strength and flexibility required for use with pneumatic and power tools.
Black Phosphate Finish
The black phosphate finish provides instant visual identification as an impact-rated accessory and gives maximum protection against corrosion and wear.
6 Point High Torque
The 6 point high torque design grips the flat sides of a fastener rather than the corners, reducing the risk of rounding off even under high load. Roll stamped size markings ensure permanent and instant identification in any working environment.
Range & Standards
Available in metric and SAE, shallow and deep, across a full range of drive sizes. Manufactured to ANSI and DIN standards.
-
Teng Tools 1/2 Drive 6-Point Metric DIN Impact Socket 8-32 mm - Individual Half Inch Drive Impact Socket Sold Separately - Choose Your Size -
Teng Tools 15 Piece 1/2 Inch Manual Impact Driver Set - Hex Phillips Flat Bits with Adaptors and Case - ID515 -
Teng Tools 14 Piece 1/2 Drive Deep Impact Socket Set - SAE Sizes 7/16 to 1 Inch - CrMo DIN FOAM1 Tray - TEA9214LAF -
Teng Tools 16 Piece 6 Point SAE Regular / Shallow 1/2 Inch Drive Chrome Molybdenum DIN Impact EVA Foam Socket Set (3/8 - 1-1/4 Inch) Mechanic Tool | Hand Tool - TEA9216AF -
Teng Tools 50-Piece 1/4 Hex Impact Bit Set — S2, PH PZ TX Hex ROB, Magnetic Holder, FOAM1 Tray - TEABS50 -
Teng Tools Impact Socket Adapter 3/8 Inch Drive Female to 1/2 Inch Drive Male, DIN Step Up Adaptor, Chrome Molybdenum, Black Phosphate - 980036-C -
Teng Tools 1 Inch Drive 24-95 mm Metric Impact Socket - DIN Specification for Heavy-Duty Power Tool Fastening -
Teng Tools 10 Piece 1/2 Inch Drive 6 Point Deep Metric ANSI Impact Socket Set 10-24 mm - 9126 -
Teng Tools 1/4 Inch Manual Impact Driver Set - 7 Piece Kit with Flat Bits, Phillips Bits, and Screw Extractors - IDSE7 -
Teng Tools 1/2 Inch Female To 3/8 Inch Male DIN Chrome Molybdenum 1/2 Inch Drive Impact Adapter | Mechanic Tool | Hand Tool - 920036N -
Teng Tools Impact Socket Adapter 3/4 Inch Drive Female to 1/2 Inch Drive Male, DIN Reducing Adaptor, Chrome Molybdenum, Black Phosphate - 940037-C -
Teng Tools 1/2 Inch Drive ANSI Impact 1/2 Inch Drive Female: 3/4 Inch Drive Male Adaptor - 920037AN -
Teng Tools 32MM 3/4 Inch Drive 6 Point Metric 15.7 Inch Extra Long Chrome Molybdenum Impact Socket | Mechanic Tool | Hand Tool - 940732-C -
Teng Tools 1/2 Inch Drive 5-19mm Hex Impact Bit Socket — CrMo Metric Allen Impact Socket for Professionals -
Teng Tools 1-1/2 Inch Drive 41-130 mm Metric Impact Socket - Individual Heavy Duty Piece for Industrial Use -
Teng Tools 1/2 Drive Deep Impact Socket Metric 10-24mm - Individual Deep Well Impact Sockets ANSI Rated for Power Tools - Choose Your Size -
Teng Tools 1/4 Inch Drive 6-13 ANSI Metric Impact Socket — Individual Replacement for Impact Wrenches and Drivers -
Teng Tools Impact Socket Retaining Pin 4 x 33 to 6 x 110 mm - Individual Pin for DIN Impact Sockets, Use With a Retaining Ring - Choose Your Size -
Teng Tools Impact Socket Retaining Ring 19 x 4 to 115 x 10 mm - Individual Ring for DIN Standard Impact Sockets and Accessories - Choose Your Size -
Teng Tools 1/2 Inch Drive XZN Triple Square Impact Socket M14-M18, 78 mm Long - Individual DIN Impact Bit Socket, Chrome Molybdenum - Choose Your Size -
Teng Tools 1/2 Inch Drive Torque Stick 90 to 140 Nm - Individual Torque Limiting Extension for Wheel Nuts with an Air Gun - Choose Your Size -
Teng Tools 1/2 Inch Drive Torx Impact Socket TX10 to TX70 DIN - Chrome Molybdenum, Black Phosphate, Pin and Ring Fixing - Choose Your Size -
Teng Tools 1/2 Drive Metric DIN XZN Triple Square Impact Socket M14-M18 - Individual Sizes - Choose Your Size -
Teng Tools 3/4 Drive 6-Point SAE DIN Deep Impact Socket 3/4 to 1-7/8 in - Individual Sizes - Choose Your Size
Common questions
What makes an impact socket different from a regular socket?
Material and rating. Impact sockets are made from CrMo (chrome molybdenum) steel to absorb the hammering of pneumatic and power tools. Regular chrome sockets must never be used on impact tools — that's the first rule in the printed care guide.
What sizes and types are available?
Drives from 3/8" up to 1-1/2", in metric and SAE, with standard, deep, stubby, thinwall, extra long and double-ended types — for 6-point, Hex, TX and XZN (triple square) fasteners. Manufactured to DIN and ANSI standards.
Do I need a retaining ring and pin?
On DIN-standard impact sockets, yes — the retaining ring and pin safely secure the socket to the impact tool. Fit them before use.
How do I make impact sockets last?
Keep them clean and dry, use the correct size for the fastener, and never extend the tool with a pole for leverage.
Torque values and calibration guidance are from the Teng Tools catalogue. Always follow the fastener manufacturer's specified torque.