Trade Tool Kits
Kits built around one trade or one job. Each one is a set of standard Teng Tools products that go together, shipped as one order from our Fort Worth, Texas warehouse. Every page lists the sizes, the pieces and a data sheet for each part.
-
Teng Tools Metric Hydraulic Fitting Wrench Kit, 17 Pieces: Double Open End Wrenches 6 x 7 to 20 x 22 mm, 7 Large Combination Wrenches, Pliers Set -
Teng Tools Fire Pump Panel Service Kit, 46 Pieces: 3/8 Inch Drive SAE Socket Set, 7 SAE T-Handle Hex Keys, Screwdrivers, Pliers, Adjustable Wrench -
Teng Tools Pneumatic Valve Manifold Service Kit, 11 Pieces: Wrenches 8, 10, 12, 14 and 17 mm, Hex Keys 2.5, 3 and 4 mm, Flat and Phillips Screwdrivers -
Teng Tools Metric Conveyor Take Up Kit, 10 Pieces: 24 and 27 mm Ratcheting Wrenches, 7 Combination Wrenches to 32 mm, 5 m Tape -
Teng Tools Metric Truss Bolting Kit, 7 Pieces: 19, 22 and 24 mm 1/2 Inch Drive Sockets, Ratcheting and Combination Wrenches, Flex Handle -
Teng Tools Yaw and Pitch Drive Motor Kit, 16 Pieces: 1/2 Inch Drive Deep Sockets 10 to 19 mm, Extra Long Hex 8 and 10 mm, Flex Handle -
Teng Tools EV Underbody Shield Kit, 81 Pieces: 1/4 and 3/8 Inch Drive Metric Sockets, Torx Bit Sockets, TX-E Sockets, Clip Removers -
Teng Tools Engine Company Rig Kit, 19 Pieces: 5 Adjustable Wrenches to 300 mm, 600 mm (24 in) Bolt Cutter, 1000 V Insulated Plier and Driver, Knife -
Teng Tools Submersible Pump Volute and Impeller Kit, 27 Pieces: 1/2 Inch Drive Deep, Shallow and Hex Bit Sockets, Two Arm Puller, Torque Wrench -
Teng Tools Packaging Line Changeover Kit, 26 Pieces: 23 Piece T-Handle Hex, TX and Nut Driver Set, 10 mm Long Hex Key, Two Double Flex Wrenches -
Teng Tools RV Interior Screw Kit, 77 Pieces: 74 Piece Ratcheting Bit Driver Set, #2 Square and PH1 Screwdrivers, Magnetic Tray -
Teng Tools Sheave and QD Bushing Change Kit, 22 Pieces: 1/2 Inch Drive Impact Sockets, Sliding T-Bar, Hex Keys 1/8 to 3/8 Inch, Hex Bit Sockets -
Teng Tools Cabinet Hinge and Drawer Adjustment Kit, 67 Pieces: 64 Piece Angled Ratcheting Bit Driver, PZ2 and PH2 Screwdrivers, Slotted Screwdriver -
Teng Tools Trim Removal and Reset Kit, 5 Pieces: 16 oz Claw Hammer, 450 mm Pry Bar, 180 mm Carpenter's Plier, 200 mm End Nipper, 9 mm Snap Off Knife -
Teng Tools Keyed Shaft and Pin Service Kit, 30 Pieces: Pin Punches 3 to 8 mm, Cold Chisels, 24 oz Ball Pein Hammer, Files, SAE Hex Keys -
Teng Tools 1000 V Insulated Busbar and Terminal Kit, 41 Pieces: 3/8 Inch Drive Sockets 6 to 20 mm, Wrenches 7 to 22 and 24 mm, Screwdrivers -
Teng Tools RV Cabinet and Drawer Tight-Space Driver Kit, 67 Pieces: 64 Piece Angled Ratcheting Bit Driver, Stubby Driver, Magnetic and Claw Pickups -
Teng Tools Packaging Line Torx Changeover Kit, 20 Pieces: TX6 to TX45 Screwdrivers, TX10 to TX40 1/4 Inch Bit Sockets, Sliding T-Bar -
Teng Tools Board and Module Service Kit, 15 Pieces: Nut Drivers 5 to 7 mm, Precision Torx TX6 to TX15, Phillips and Pozidriv, Side Cutters -
Teng Tools Hydraulic Cylinder Repack Kit, 17 Pieces: Hook and Pin Wrenches 19 to 120 mm, Circlip Pliers 40 to 100 mm, Scraper Set, Engineers Hammer -
Teng Tools 1000V Insulated E-Bus and Truck Battery Kit, 39 Pieces: 3/8 Inch Drive Sockets 6 to 20 mm, Ratchet, Four Pliers, Wrenches 7 to 22 and 24 mm -
Teng Tools Pump Mechanical Seal Service Kit, 25 Pieces: Stubby Metric Wrenches 10 to 19 mm, Ball Point Hex Keys 1.5 to 10 mm, Circlip Pliers, Scrapers -
Teng Tools Valve Bank Fitting Kit, 27 Pieces: 3/8 Inch Drive Torque Wrench 20 to 110 Nm, Crowfoots 10 to 19 mm, 500 mm Extension, Backup Wrenches -
Teng Tools 3/4 Inch Drive Flange Bolting Kit, 37 Pieces: 30 SAE and Metric Sockets to 2 Inch and 50 mm, 50 to 300 ft-lb Torque Wrench, Backup Wrenches
