A hand rivet gun for pop rivets should set the rivet materials and diameters you actually use. The Teng Tools HR01 Hand Riveter sets aluminum and stainless steel rivets in 2.4, 3.2, 4.0 and 4.8 mm, and steel rivets in 2.4, 3.2 and 4.0 mm, all from one aluminum alloy body.
What to Look for in a Rivet Gun
- Rivet material coverage: Check which materials the tool can set. Aluminum, stainless steel and steel rivets do not all have the same size range on every tool.
- Diameter range: Match the tool to the metric diameters you stock. Common sizes are 2.4, 3.2, 4.0 and 4.8 mm.
- Length: A shorter tool fits more easily into confined spaces.
- Weight: A lighter body is easier to handle for repeated work.
- Grip: Look for grips that give a solid hold in the positions you work in, whether overhead or flat on a bench.
- What comes in the box: Some kits pad the package with accessories or sample rivets. Decide whether you need those or just the tool.
HR01 Specifications
- Aluminum rivets: 2.4, 3.2, 4.0 and 4.8 mm
- Stainless steel rivets: 2.4, 3.2, 4.0 and 4.8 mm
- Steel rivets: 2.4, 3.2 and 4.0 mm
- Body: aluminum alloy
- Overall length: 250 mm (9.8 in)
- Total weight: 552 g
- Grips: black, contoured
When the HR01 Is the Right Choice
Choose the HR01 if you set pop rivets in more than one material and want a single tool that covers three rivet materials and four metric diameters. It suits automotive, HVAC, marine and general fabrication work where the rivet type changes from job to job.
The 250 mm length keeps it compact for confined spaces, and the contoured grips give a solid, comfortable hold overhead or on a bench.
The box contains the riveter only. There are no filler accessories or sample rivets, so it is meant for users who already stock their own fasteners.
When to Look Further
If your work calls for 4.8 mm steel rivets, note that the HR01 sets steel rivets up to 4.0 mm. Aluminum and stainless steel rivets are covered up to 4.8 mm. If you need rivets supplied with the tool, plan to buy them separately.
See the Teng Tools Hand Riveter for Pop Rivets — Aluminum Alloy Body, 2.4/3.2/4.0/4.8 mm, 250 mm Long — HR01.