Facilities Maintenance Tool Kits
Kits for building and plant maintenance: seized fasteners, anchor bolts, plumbing fixtures and everyday repairs in one order.
-
Teng Tools Aluminum and Chain Pipe Wrench Set, 4 Pieces: 450 mm (18 in) and Two 600 mm (24 in) Aluminum Pipe Wrenches, Chain Pipe Wrench -
Teng Tools 1/4 Inch Hex Drill Driver Bit Kit, 37 Pieces: PH2, PH3 and TX25 Bits, 8 mm Nut Setters, Quick Chuck Holder, 300 mm Flexible Holder -
Teng Tools Ceiling Grid and Tile Kit, 16 Pieces: 8 m Tape, Left, Right and Straight Snips, Torpedo Level, Snap Off Knife and 10 Spare Blades -
Teng Tools Hex Terminal Torque Kit, 6 Pieces: 1 to 5 Nm Screwdriver, 10 to 100 Nm Digital Torque Wrench, Adaptor, 3/16, 1/4, 5/16 Inch Hex Bit Sockets -
Teng Tools Circulator Pump Flange Wrench Kit, 7 Pieces: Ratcheting and Plain Wrenches 9/16 to 11/16 Inch, Water Pump Pliers, Gasket Scraper -
Teng Tools 1/4 Inch Drive SAE Deep Socket and Hex Adaptor Kit, 9 Pieces: 1/4 to 1/2 Inch Sockets, 45 Tooth Ratchet, Spinner Handle, Extension -
Teng Tools Rack Hardware Driver Set, 9 Pieces: PH1 and PH2 Phillips, 5.5 mm Slotted, TX20, TX25, TX30, 7, 10 and 13 mm Nut Drivers -
Teng Tools Bearing Puller and Runout Kit, 8 Pieces: 260 x 150 mm Puller, Hook and Pin Wrenches, Circlip Pliers, Dial Indicator, Dead Blow Hammer -
Teng Tools Open End and Ring Slogging Wrench Kit with Lump Hammer, 11 Pieces: 24, 27, 30, 32 and 36 mm Pairs, 1250 g Hammer -
Teng Tools SAE Elevator Door Hanger Service Kit, 29 Pieces: 3/8 Inch Drive Ratchet, Deep Sockets 3/8 to 3/4 Inch, Wrenches, Hex Keys, Feeler Gauge -
Teng Tools Large Metric Combination and Adjustable Wrench Kit, 12 Pieces: Wrenches 24 to 36, 38, 41, 46 and 50 mm, 375 and 450 mm Adjustables -
Teng Tools Copper Tube Cutting Kit, 9 Pieces: 3 to 32 mm Tube Cutter, Deburring Tool, Mini Hacksaw, 5 Spare Blades, 150 mm Adjustable Wrench -
Teng Tools Tamper-Resistant Torx Kit, 21 Pieces: TPX10, TPX15, TPX25 and TPX30 Bits, 7 TX and TPX Screwdrivers, TX27 T-Handle, Magnetic Bit Driver -
Teng Tools Electrical Terminal Screwdriver Set, 7 Pieces: TX15, TX20, TX25, Slotted 3.5 x 100 and 5.5 x 150 mm, PZ2, PH2 x 200 mm -
Teng Tools Phillips Bit Driver Kit, 6 Pieces: PH1, PH2 and PH3 Bit Packs, Quick Chuck Holder, Magnetic Bit Driver, Mini Ratchet -
Teng Tools Pulley and Bearing Puller Kit, 7 Pieces: 140 x 100 mm Two Arm Puller, Four SAE T-Handle Hex Keys, Snap Ring Pliers -
Teng Tools Caster and Cart Repair Kit, 7 Pieces: Ratcheting Wrenches 13, 17 and 19 mm, Snap Ring, Flat Nose and Locking Pliers -
Teng Tools 4 Inch Bench Vise and File Kit, 7 Pieces: Forged Vise, Flat, Half Round and Triangular Files, 500 g Hammer, F Clamp, Cold Chisel -
Teng Tools Demolition Pry Bar and Chisel Kit, 5 Pieces: 550 mm Pry Bar, 400 mm Heel Bar, Cold Chisel, 1250 g Lump Hammer, Bolt Cutter -
Teng Tools Sheet Metal Snip and Locking Pliers Kit, 9 Pieces: Left Cut Snip, Sheet Metal Pliers, C Clamp Pliers, Nut Setters, Flat File -
Teng Tools Pulley and Bearing Service Kit, 20 Pieces: Two Arm Puller, Circlip Pliers, Metric and SAE Ball End Hex Keys, 750 g Dead Blow Hammer -
Teng Tools Pliers and Adjustable Wrench Kit with Locking Pliers, 13 Pieces: 5 Piece Pliers Set, 4 Adjustable Wrenches, 3 Locking Pliers, Foam Tray -
Teng Tools Slogging Wrench and Lump Hammer Kit, 3 Pieces: 24 and 27 mm Open End Striking Wrenches, 1250 g Lump Hammer -
Teng Tools Bearing Service Puller Kit, 19 Pieces: Gear Puller Set, Two-Arm Puller, Hook and Pin Wrenches 19 to 120 mm, Snap Ring Pliers, Hammer
