TED1227 - 27 Piece 1/2" Drive Socket Set

Accessories - 1/2 inch drive - 72 teeth ratchet

2 1/2 inch and 6 inch extension bars, universal joint

3/8in.F:1/2in.M adaptor

Regular sockets - 1/2 inch drive - 12 point - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24mm

Deep sockets - 1/2 inch drive - 12 point - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

TED1489 - 89 Piece 1/4" Drive Socket Set

Accessories - 1/4 inch drive - 72 teeth ratchet, spinner handle, 2in. and 4in. extension bars, universal joint, coupler adaptor, 3/8in.F:1/4in.M adaptor, 1/4in.M:1/4in. hex adaptor

Regular sockets - 1/4 inch drive - 6 point - 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

Bit sockets - 1/4 inch drive - 4, 5.5, 7mm flat, TX10, TX15, TX20, TX25, TX27, TX30, TX40, PZ1, PZ2, PZ3, PH0, PH1, PH2, PH3

25mm bits - 1/4in. Hex Drive - 3, 4, 5.5, 7mm flat, TX8, TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45, PZ0, PZ1, PZ2, PZ3, PH0, PH1, PH2, PH3, PH4, 3, 4, 5, 6, 8, 10mm hex, 1/8in., 9/64in., 5/32in., 3/16in., 1/4in., 5/16in. hex, TPX10, TPX15, TPX20, TPX25, TPX27, TPX30, TPX40, spline 5 and 6

TED3836 - 36 Piece 3/8" Drive Socket Set

Accessories - 3/8 inch drive - 72 teeth ratchet, rotating spinner handle, 3in. extension bar, universal joint, 1/2in.F:3/8in.M adaptor

Regular sockets - 3/8 inch drive - 6 point - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm

Bit sockets - 3/8 inch drive - TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45, TX50, 3, 4, 5, 5.5, 6, 7, 8, 10, 12mm hex

TED6512R - 12 Piece Ratchet Wrench Set

Ratcheting combination spanners - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Flip reverse lever for directional change.

72 teeth ratchet mechanism

12 point ring end

Offset ring end for clearance

TEX2032 - 7 Piece Combination Wrench Set

Combination spanners - 20, 21, 22, 24, 27, 30, 32mm

The 12 point ring head is set at a 15° angle to facilitate use even on flat surfaces

All ring heads are equipped with the Teng Tools "Hip Grip" system which means the contact surface grips on the flat surfaces of the nut rather than on the corner. This helps prevent damage to the nuts and bolts and makes it possible to grip nuts and bolts which already have damaged corners

Made from high grade chrome vanadium with polished heads and a satin finish for extra grip in oily environments

TEXEXT13 - 13 Piece Socket Accessory Set

Accessories - 1/4 inch drive - 6in. and 12in. extension bars, universal joint

3/8 inch drive - 3in. wobble extension bar, 20in. extension bar, universal joint, 3/8in.F:1/4in.M T bar adaptor

1/2 inch drive - 3in. wobble extension bar, 20in. extension bar, universal joint

Accessories - T handle grip, 2 and 2.5mm mini hex drivers

Made of High Grade Chrome Vanadium

TEXW05 - 5 Piece Wheel Removal Tool Set

Flexible handle - 1/2 inch drive - 17in. (425mm)

Wheel nut sockets - 1/2 inch drive - 17, 19, 21mm

Impact accessories - 1/2 inch drive - 5in. (125mm) wobble extension bar

Flex handle is made of chrome vanadium with an ergonomic grip whilst the head is made from Chrome Molybedenum for extra strenght

Wheel nut sockets are made of chrome molybedenum and have a rubber coating to protect alloy wheels from marking.

TED8012 - 12 Piece Anti Slip Combination Wrench Set

Combination spanners - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Anti slip grip on the open end as well as the hip grip function where the spanner drives on the flank of the fastening rather than the corner

Hole in the handle for securing the tool while working at height

The design also provides grip on fastenings with worn or rounded corners.

These two design features combine to provide a much better grip with less risk of damage to the fastening

Manufactured and designed in accordance with DIN3113A in high grade chrome vanadium steel.

The ring head is offset 15 degrees to facilitate use even on flat surfaces.

TED9121 - 21 Piece 1/2" Drive Impact Socket Set

Accessories - 1/2 inch drive - 3in. and 10in. extension bars, universal joint, 3/8in.F:1/2in.M adaptor, 1/2in.F:3/4in.M adaptor

Regular sockets - 1/2 inch drive - 6 point - 13, 15, 16, 17, 18, 19, 22, 24mm

Deep sockets - 1/2 inch drive - 6 point - 13, 15, 16, 17, 18, 19, 22, 24mm

All sockets are marked with the size for quick identification

TEDADJ4 - 4 Piece Adjustable Wrench Set

Adjustable wrenches - 6 Inch (150mm), 8 Inch (200mm), 10 Inch (250mm)

Wide jaw adjustable wrench with comfort grip - 8 Inch / (200mm)

Graduated scale for easy measurement

TEDHT42 - 42 Piece Hex & TX Key Set

Hex key sets - metric - 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 10mm

inch - 5/64in., 3/32in., 1/8in., 5/32in., 3/16in., 7/32in., 1/4in., 5/16in., 3/8in.

TX key sets - TX - 8, 9, 10, 15, 20, 25, 27, 30, 40

Fold up set - 4, 5, 6mm hex, TX25, TX30, 1.0x5.5 flat, PH2, PZ2

Mini TX keys - TX - 6, 7, 8, 9, 10, 15

Ball point end hex keys - ideal for hard to access areas

Ergonomic as they permit a natural hand wrist movement

Up to 25 degree angle entry

TTEMB11 - 11 Piece Plier Set

Side cutters - Heavy duty - 8in.(3.0mm piano wire cutting capacity)

Combination pliers - High leverage - 7in.(1.8mm piano wire cutting capacity)

Long nose pliers - 8in. (1.5mm piano wire cutting capacity)

Water pump pliers - 10in. (38mm capacity)

Circlip pliers - Inner type - 7in. straight and bent type (1.8mm tip, 19 to 60mm capacity)

Circlip pliers - outer type - 7in. straight and bent type (1.8mm tip, 19 to 60mm capacity)

Power grip pliers - long nose - 6in. straight jaw (35mm capacity)

Power grip pliers - regular - 4in. and 10in. curved jaw (25mm/47mm capacity)

Round jaw type - 4in., 5in., 10in. and 12in.

Flat jaw type - 10in. and 12in.

Long nose type - 4in., 6 1/2in. and 9in.

Clamp pliers - 11in. C clamp plier with swivel pad, 12in. self levelling locking plier

Steel Alloy and Chrome Molybdenum gives a greater cutting capacity

The cutting edges on pliers are especially angled to suit different materials and application areas

Slim design gives better accessibility

The cutting capacity is laser marked next to the cutting edge - makes it easy to see which pliers you need to choose

TTEMD98N - 98 Piece Screwdriver & Bit Set

Screwdrivers - TX type - TX8x75, TX9x75mm

Screwdrivers - TPX type - TPX10x100, TPX15x100, TPX20x100, TPX25x100, TPX30x100mm

Power thru screwdrivers - flat type - 6.5x100, 8x150,10x200mm

Power thru screwdrivers - PH type - PH2x100, PH3x150mm

1,000 volt screwdrivers - flat type - 2.5x75, 4x100, 5.5x125mm

1,000 volt screwdrivers - PH type - PH0x60, PH1x8, PH2x100mm

1,000 volt screwdrivers - PZ type - PZ2x100mm

Mini screwdrivers - flat type - 2.0x40, 2.5x40, 3.0x40mm

Mini screwdrivers - PH type - PH00x40, PH0x40, PH1x40mm

Mini screwdrivers - TX type - TX6, TX7, TX8, TX9, TX10, TX15

1/4in. hex 25mm screwdriver bits - flat type - 0.6x3.5, 0.6x4.5, 0.8x4.0(2pieces), 0.8x5.5, 1.0x5.5(2 pieces), 1.2x6.5, 1.6x8.0mm

1/4in. hex 25mm screwdriver bits - GR type - PH2 (3 pieces)

1/4in. hex 25mm screwdriver bits - Hex type - 2, 3, 4, 5, 6, 8mm

1/4in. hex 25mm screwdriver bits - PH type - PH1 (3 pieces), PH2 (3 pieces), PH3 (3 pieces),

1/4in. hex 25mm screwdriver bits - PZ type - PZ1 (3 pieces), PZ2 (3 pieces), PZ3 (4 pieces)

1/4in. hex 25mm screwdriver bits - ROB type - 1,2,3 square

1/4in. hex 25mm screwdriver bits - TX type - TX6, TX7, TX8, TX10, TX15, TX20 (3 pieces), TX25 (3 pieces), TX27, TX30, TX40

1/4in. hex 25mm screwdriver bits - TPX type - TPX10, TPX15, TPX20 (2 pieces), TPX25 (2 pieces), TPX27, TPX30, TPX40

Ratchetting bits driver - Reversible for use with 1/4in. hexagon drive bits

Ratchetting bits driver contd. - Supplied with 6 assorted bits stored in slide out holder in the handle

Accessories - Magnetic charger/discharger for magnetising and/or demagnetising screwdriver tips, "bullet holdersin. for bits

Accessories - 1/4 inch drive - 1/4in.M:1/4in. hexagon adaptor, coupler adaptor

The handle has a unique ergonomically designed two component grip with greater volume to give better support, increase comfort and improved power transfer

Handle is moulded around the blade to ensure it is completely straight and permits much larger wings for more torque

Hole in the handle for tool securing when working at height or for use as a T - handle

Steel alloy blade gives 20% capacity than standard screwdrivers

TTEPS12 - 12 Piece General Service Tool Set

Cutting tools - utility knife with spare blades, 12in. hack saw

Striking tools - 800gm engineers hammer, soft face hammer, cold chisels (150x18mm, 200x25mm)

Striking tools contd. - 150x5mm centre punch, parallel pin punches (3, 4, 5, 6, 7, 8mm)

Gripping tools - 6in. and 10in. adjustable wrenches

Measuring tools - 8 Foot / 3 meter measuring tape, 200mm steel rule

TTEX23 - 23 Piece Nut Driver & T-Handle Wrench Set

Nut drivers - 5, 5.5, 6, 7, 8, 10, 11, 12, 13mm

T handle hex drivers - 2.5, 3, 4, 5, 6, 7, 8mm

T handle TX/TPX drivers - T10, T15, T20, T25, T27, T30, T40

Ball point end hex keys - ideal for hard to access areas

Ergonomic as they permit a natural hand wrist movement

Up to 25 degree angle entry

TEX915N - 5 Piece Flat & PH Type Screwdriver Set

Screwdrivers - flat type - 5.5x150, 6.5x150, 8.0x150, 10.0x200mm

Screwdrivers - PH type - PH3x150mm

The handle has a unique ergonomically designed two component grip with greater volume to give better support, increase comfort and improved power transfer

Handle is moulded around the blade to ensure it is completely straight and permits much larger wings for more torque

Hole in the handle for tool securing when working at height or for use as a T - handle

Steel alloy blade gives 20% capacity than standard screwdrivers