1/2 Inch Drive Impact Universal Joint

The Teng Tools 920030N is a 1/2 inch drive impact joint with DIN standard connections on both the male and the female end. It is rated for use with impact wrenches and provides access to fasteners at various angles.

When a bolt sits off line, behind a bracket or around a corner, a joint at the socket end lets the impact wrench stay where it fits instead of being brought square to the fastener. That makes it an essential accessory for reaching difficult bolts when using an impact tool, according to Teng Tools.

Both ends are DIN standard connections for secure attachment, so the joint suits a 1/2 inch drive impact setup built to DIN throughout. It is made from chrome molybdenum for strength. Use it with impact-rated sockets rather than chrome hand sockets.

Teng Tools lists this joint in its TTEISK73, TT9207 and TTEISK103 sets, so it replaces a lost joint from any of those. If you need an ANSI male end for your sockets instead, the matching part is the 920030AN, which has a DIN female end and an ANSI male end.

What you get: 1 x 1/2 inch drive impact joint, DIN on both ends. Impact wrench, sockets and retaining hardware are not included.

• Provides access to fasteners at various angles, so the impact wrench can stay where it fits while the socket meets a nut that sits off line, behind a bracket or around a corner. It is an accessory for reaching difficult bolts when using an impact tool, and it saves bringing the air gun square to every fastener in a crowded space.
• DIN standard connections on both the male and the female end give secure attachment to the tool and to the socket. That matches a 1/2 inch drive impact setup built to DIN throughout. If your sockets are ANSI on the drive side, the 920030AN is the version with a DIN female end and an ANSI male end; this one is DIN at both ends.
• Rated for use with impact wrenches and made from chrome molybdenum for strength, according to Teng Tools. Use it as an impact swivel adapter between a 1/2 inch drive impact wrench or air gun and an impact-rated socket, rather than putting a chrome hand-tool joint on a tool that hammers.
• The 1/2 inch square drive suits 1/2 inch drive impact sockets and extensions, so the joint can sit at the socket end of an impact extension to turn the last part of the reach around an obstruction. As a swivel socket adapter it adds the angle without changing to a different drive size or a different tool.
• Teng Tools lists this joint in its TTEISK73, TT9207 and TTEISK103 sets, so it is the matching replacement when the one from those sets goes missing, and it keeps a DIN impact kit consistent from end to end. What you get is the joint alone: the impact wrench, sockets and any retaining hardware are not included.

Part number: 920030N