1/2 Inch Drive Impact Universal Joint

The Teng Tools 920030AN is a 1/2 inch drive impact joint with a DIN female end and an ANSI male end. Its head rotates through 180 degrees for use at different angles, which makes it ideal for use in confined spaces where the impact wrench cannot sit square to the fastener.

It is a DIN standard design for use with a retaining pin and ring, made to DIN 3121. A ring and pin fixing hole on the female end secures the joint to the air gun, and a ring and pin fixing hole on the male end securely grips the socket. Teng Tools lists retaining pin P92325 and retaining ring O92244 for it; they are not included.

The joint is chrome molybdenum for use with power tools, with a black phosphate finish for easy identification as an impact socket accessory. Use it with impact-rated sockets.

It comes with a metal socket clip for use with a socket rail and weighs 210 g (7.4 oz). Teng Tools lists it in its TED9121 and TT9207A sets. If your set uses DIN on both ends rather than an ANSI male end, the matching part is the 920030N.

What you get: 1 x 1/2 inch drive impact joint, DIN female and ANSI male, with a metal socket clip. Impact wrench, sockets, retaining pin and retaining ring are not included.

• The head rotates through 180 degrees for use at different angles, which makes the joint ideal for use in confined spaces. It lets the impact wrench stay where it fits while the socket meets a fastener that sits off line, behind a bracket or around a corner, so you do not have to bring the air gun square to every nut.
• Made to DIN 3121, with a DIN standard design for use with a retaining pin and ring. A ring and pin fixing hole on the female end secures the joint to the air gun, and a ring and pin fixing hole on the male end securely grips the socket. The male end follows the ANSI standard; the 920030N is the version with DIN on both ends.
• Chrome molybdenum (CrMo) for use with power tools, as an impact swivel adapter should be. The black phosphate finish gives easy identification as an impact socket accessory, so it stays with your impact sockets and does not get mixed up with chrome hand-tool parts in a shared drawer or on the bench.
• Teng Tools lists retaining pin P92325 and retaining ring O92244 for this joint, so you can lock the female end to the anvil of the wrench and the socket onto the male end. The pin and ring are separate Teng Tools parts and are not included, so order them alongside if your wrench and sockets are set up for pin and ring retention.
• Supplied with a metal socket clip for use with a socket rail, so this swivel socket adapter hangs in line with your 1/2 inch drive impact sockets. It weighs 210 g (7.4 oz). Teng Tools lists it in its TED9121 and TT9207A sets, so it is also the matching replacement when the joint from either set goes missing.

Part number: 920030AN