1/4 Inch Drive Spinner Handle, 1/4 Spinner Handle

The Teng Tools M140015-C is a 1/4 inch square drive spinner handle with an ergonomic bi-material grip. It turns 1/4 inch drive sockets like a screwdriver, for comfortable rapid rotation during fastener installation and removal, in confined spaces and in high-volume assembly tasks.

The bi-material handle is designed for easy use, particularly in wet or oily conditions. The shaft is chrome vanadium with a satin finish for a better grip when handling sockets, and a ball detent on the male end securely grips the socket. A retention groove for the ball detent secures the connection of the spinner handle to the drive end. Teng Tools designs and manufactures it to DIN3122E.

The handle is 150 mm (5.9 in) long and weighs 97 g (3.4 oz), and it is supplied with a metal socket clip for use with a socket rail. It is the 1/4 inch drive spinner included in numerous Teng Tools socket and tool sets, so it also serves as a replacement or a second handle. Buyers also search for it as a 1/4 socket driver.

What you get: 1 x 1/4 inch drive spinner handle with metal socket clip. Sockets and socket rail are not included.

• A spinner works like a screwdriver for sockets. Fit a 1/4 inch drive socket on the square drive and turn the handle with your fingers to run a nut or bolt in or out quickly, in confined spaces where there is no room to swing a ratchet, and for high-volume assembly work where speed matters more than torque.
• The ergonomically designed bi-material handle is made for easy use, particularly in wet or oily conditions, and stays comfortable during rapid rotation. It turns the handle into a socket screwdriver that you can spin between fingers and thumb, then grip with the whole hand for the last turn when the fastener seats.
• A ball detent on the male end securely grips the socket, so it stays on the shaft as you reach into a recess or pull back out, and comes off with a firm pull when you change size. A metal socket clip is supplied for use with a socket rail, so the handle can sit on the rail at the end of your 1/4 inch drive sockets.
• The shaft is chrome vanadium with a satin finish for a better grip when handling sockets, and the handle is designed and manufactured to DIN3122E according to Teng Tools. A retention groove for the ball detent secures the connection of the spinner handle to the drive end, as listed on the Teng Tools datasheet.
• Overall length is 150 mm (5.9 in) and the weight is 97 g (3.4 oz), so it fits a toolbox drawer, a tool roll or a small 1/4 inch drive socket case. It is the same 1/4 drive spinner handle included in many Teng Tools socket sets, so it is a direct replacement or a second handle for an existing kit. Sockets are not included.

Part number: M140015-C