32 Piece Socket Organizer Rail Set

The Teng Tools TTALU is a 32 piece clip rail set for socket storage in a TT-Series module size 1 tray. Inside are two aluminum holding rails, each 260 mm (10.2 in) long, and 30 socket rail clips: ten for 1/4 inch drive, ten for 3/8 inch drive and ten for 1/2 inch drive. A protective mat lines the bottom of the tray.

Teng Tools designed this tray to store loose sockets and small accessories securely. Clip the sockets you use most onto the rails in size order and the whole run stays where you put it, whether the tray lives in a toolbox drawer, on a tool cart or on a shelf in the van. Because the clips come loose, you choose how many positions go to each drive, and spare clips stay in the tray for later.

The rails can be lifted out and taken to the job, which saves walking back for the one size you forgot. An empty clip shows straight away which socket has not come back. The easy-clean design and protective mat suit oily or humid workshop conditions, and the tray uses dove tail joints, according to Teng Tools.

The tray measures 142 x 265 x 50 mm (5.6 x 10.4 x 2.0 in) and lines up with other TT-Series modules in a drawer. The complete set weighs 143 g (5.0 oz).

What you get: TT1 tray with protective mat, two aluminum clip rails 260 mm (10.2 in), 10 x 1/4 inch drive clips (ALU14), 10 x 3/8 inch drive clips (ALU38), 10 x 1/2 inch drive clips (ALU12). Sockets are not included.

• The set includes two aluminum clip rails, each 260 mm (10.2 in) long, to fit the length of the TT1 tray. Fit the clips you need onto each rail and your loose sockets line up in size order instead of rolling around the bottom of a drawer. Lift a rail out to carry a run of sockets to the job, then drop it back in its place.
• Ten clips for 1/4 inch drive (ALU14), ten for 3/8 inch drive (ALU38) and ten for 1/2 inch drive (ALU12). Mix them along a rail to build a 1/4 socket rail, a 3/8 socket rail or a 1/2 socket rail, or split one rail between two drives. Each clip holds one socket, so every size keeps its own position on the rail.
• Everything sits in a Teng Tools TT-Series tray, module size 1 (TT1), measuring 142 x 265 x 50 mm (5.6 x 10.4 x 2.0 in), with one open compartment and a protective mat in the bottom of the tray. Teng Tools specifies dove tail joints on the tray, and the easy-clean design suits oily or humid workshop use.
• The TT1 module is sized to sit in a tool box drawer alongside other TT-Series trays, so this socket tray becomes part of an organized drawer layout rather than a loose box. Teng Tools designed it to store loose sockets and small accessories securely, which makes it a simple socket holder for sockets you already own from any set.
• With every socket on its own clip, an empty position shows straight away which size has not come back from the job, before the drawer is closed and the van leaves. Keep one rail per drive or one rail per job, and the sockets go back in the same order every time. The complete set weighs 143 g (5.0 oz). Sockets are not included.

Part number: TTALU