430 mm Single Track Aluminum Socket Clip Rail

The Teng Tools ALU430 is a 430 mm (16.9 in) single track clip rail made from an aluminum section. It is the rail only: Teng Tools socket clips clip on to it, and each clip holds one socket.

The rail is for use with Teng Tools socket clips in 1/4, 3/8, 1/2 or 3/4 inch drive, which makes it the base for socket rails 1/4, 3/8, 1/2 or 3/4 in whatever mix your work needs. Fit one rail with clips for a single drive size and the sockets sit in a line, in order, with every size in its own place.

Teng Tools specifies it for mounting on the wall or in a tool box. On a wall or a panel above the bench it keeps the sockets you use most at eye level; in a drawer it stops them rolling around and lets you lift the whole run out at once. The rail weighs only 40 g (1.4 oz), so a loaded rail stays easy to carry to the job.

It suits anyone building or extending a socket storage system on Teng Tools clips, in a home garage, a service bay, a fleet workshop or a tool crib.

What you get: one 430 mm (16.9 in) single track aluminum clip rail, weight 40 g (1.4 oz). Socket clips, sockets and mounting screws are not included. Fit is stated for Teng Tools socket clips only.

• The rail is made for Teng Tools socket clips in 1/4, 3/8, 1/2 or 3/4 inch drive. Slide on the clips for the drive you need and it becomes a 3/8 socket rail for one set, a 1/4 socket rail for the small sizes, or a run of larger sockets, and you can rebuild it for a different drive later.
• A single track aluminum section 430 mm (16.9 in) long that weighs just 40 g (1.4 oz). Light enough that a rail loaded with sockets lifts out of a drawer and goes to the vehicle in one hand, and long enough to keep a full run of one drive size together in one line, in order from small to large.
• Teng Tools specifies the rail for mounting on the wall or in a tool box. Fix it to a workshop wall or a panel above the bench as a wall mount socket holder, or lay it in a drawer to keep sockets standing in a line instead of rolling to the back. Mounting screws are not stated as included, so plan your own fixings for the wall.
• With each socket on its own clip, the rail works as a socket holder that makes a gap obvious. An empty clip tells you straight away which size has not come back from the job, so sockets get returned before the toolbox is closed instead of turning up weeks later under a seat or on the floor of the bay.
• One 430 mm single track aluminum clip rail. Socket clips and sockets are not included; the rail comes bare, and Teng Tools socket clips are sold separately, so you fit exactly the drive sizes and the number of clips you need. Fit is stated for Teng Tools socket clips only, not for clips or rails of any other brand. Designed in Sweden by Teng Tools.

Part number: ALU430