Socket Organizer, 4 Track Aluminum Socket Rail 450 mm

The Teng Tools ALU450 is a socket clip rail set built around a four track aluminum section with carrying handles. It is 450 mm (17.7 in) in overall length, which Teng Tools specifies to fit in most tool boxes, and it comes with 10 socket clips each in 1/4 inch, 3/8 inch and 1/2 inch drive.

The four tracks run side by side, so one section can hold several rows of sockets: one drive per track, or regular and deep sockets of the same drive next to each other. Fit the clips where you need them and every socket gets its own position, in order, ready to pick out and put back.

The carrying handles let you lift the loaded section out of the drawer and take the sockets you need to the job as one socket rack, then return them the same way. Any empty clip shows which size is still out, so nothing gets left behind in an engine bay or on a machine.

Use the socket rail clips supplied to set up your own layout, and keep any spares for later. The set has 33 pieces and weighs 497 g (1.1 lb) without sockets.

What you get: one four track aluminum clip rail section 450 mm (17.7 in) with carrying handles, 10 x 1/4 inch drive socket clips, 10 x 3/8 inch drive socket clips, 10 x 1/2 inch drive socket clips. Sockets are not included.

• A four track aluminum section, 450 mm (17.7 in) overall length, that Teng Tools sizes to fit in most tool boxes. Four parallel tracks side by side mean you can give each drive size its own aluminum socket rail, or keep regular and deep sockets of one drive on neighboring tracks, all in one piece that moves as a unit.
• The section comes with carrying handles at the ends, so a full set of sockets lifts out of the drawer in one go and goes to the vehicle, the machine or the bench. That turns the rail into a socket holder you take to the job instead of walking back to the toolbox for each size, and it all goes back in the drawer the same way.
• Supplied with 10 socket clips each in 1/4 inch, 3/8 inch and 1/2 inch drive. Set up a 1/4 socket rail, a 3/8 socket rail and a 1/2 socket rail on separate tracks, then use the fourth track for whichever drive needs more room. Each clip holds one socket, so every size keeps its own position in order.
• At 450 mm (17.7 in) long the section is sized to sit flat in most tool box drawers, keeping socket storage in rows that read at a glance when the drawer opens. Loose sockets stop rolling to the back of the drawer, and the sizes stay in order from smallest to largest across the four tracks.
• With every socket on its own clip, an empty position shows straight away which size has not come back before the drawer is closed. The set is 33 pieces, the aluminum section, its carrying handles and the clips, and weighs 497 g (1.1 lb) without sockets. Sockets are not included.

Part number: ALU450