1/2 Inch Drive Ratchet, 72 Tooth Fine Tooth Ratchet Wrench

The Teng Tools 1200-72N is a fine tooth ratchet for 1/2 inch square drive sockets and accessories. Its 72 tooth mechanism gives 5 degree increments between clicks, so the head engages again after only a short swing of the handle and you can keep turning fasteners in restricted spaces.

The twist reverse changes between tightening and loosening quickly and easily, and the quick release makes it simple to change from one socket or accessory to the next. The slim design is paired with a bi-material grip for extra comfort. The ratchet also has a tethering facility, so it can be secured with a lanyard where dropped tools are a concern.

It is 250 mm (9.8 inch) long and weighs 435 g (15.3 oz), and Teng Tools designs and manufactures it to DIN3122D. A half inch ratchet of this length suits automotive, fleet and general maintenance work on larger fasteners.

If you already have 1/2 inch drive sockets, this is the handle to drive them. It also makes a good replacement for a worn or coarse-tooth 1/2 inch ratchet in an existing kit.

What you get: one 1/2 inch drive ratchet with 72 teeth, twist reverse and quick release. Sockets, extensions, adaptors and lanyard are not included.

• A fine tooth mechanism with 72 teeth gives 5 degree increments between clicks. A short swing of the handle is enough to pick up the next tooth, so you can keep working a nut or bolt in an engine bay, under a vehicle or behind a bracket where there is not much room to move a 1/2 inch ratchet.
• Switch between tightening and loosening with a twist of the reverse control instead of hunting for a small lever. The change is quick and easy, and you do not have to take the ratchet off the fastener to do it, which saves time when you are running a nut down and then need to back it off again.
• The quick release lets you take a socket or accessory off the drive easily and put the next one on, so changing sizes between fasteners is fast. Use it with 1/2 inch drive sockets, extensions and adaptors from your existing kit, as a hand ratchet for the larger fasteners in general workshop jobs that call for 1/2 inch drive.
• The slim design keeps the head and body compact for tight spaces, and the bi-material grip on the handle is there for extra comfort over a long day. At 250 mm (9.8 inch) overall and 435 g (15.3 oz), it gives useful leverage for a 1/2 socket wrench while staying easy to handle in confined areas.
• The ratchet has a tethering facility, so it can be secured with a tool lanyard (not included) where a dropped tool is a risk. Designed and manufactured to DIN3122D, according to Teng Tools. This is a single ratchet; sockets, extensions and other tools are sold separately.

Part number: 1200-72N