1000V Insulated Screwdriver Set

For electricians working on or near live equipment, this bundle puts two Teng Tools insulated sets in one order. The first covers screwdrivers and pliers in a carry case; the second adds a 1000V insulated 3/8 inch drive socket set for the panel and busbar fasteners a screwdriver cannot reach. Every tool in both sets is approved for live working up to 1000 volts and manufactured to IEC 60900.

What is in the box:

• TV18N: MECCA PRO insulated screwdriver and plier set, 18 pieces, in a hard-wearing carrying case. Five pliers (two side cutting, one combination, one long nose, one wire stripping) and thirteen screwdrivers (five slotted, four Phillips PH0 to PH3, four Pozidriv PZ0 to PZ3).
• TEFSKV19: 1000 volt insulated socket and pliers set, 19 pieces, in a FOAM3 EVA foam inlay. Four pliers, a 72 tooth 3/8 inch drive ratchet, two extension bars and twelve 6 point metric sockets from 8 to 20 mm.

Why they go together: the case set handles terminal screws, conductor cutting and stripping, while the foam set handles the nuts and bolts on the same job. An insulated tool set for each kind of fastener means fewer reasons to reach for an uninsulated spare.

The screwdrivers carry two-colour protective insulation that shows damage clearly. The sockets are insulated in the same two colours. The pliers have TPR grips for a secure hold. The foam set is designed to fit exactly in Teng Tools service cases, so it can live in a drawer or travel in a case.

Each item is a standard Teng Tools product, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

• TWO 1000V SETS FOR LIVE ELECTRICAL WORK — This bundle puts two standard Teng Tools insulated sets into one order for electricians working on or near live equipment: the TV18N 18-piece screwdriver and plier set in a MECCA PRO carrying case, and the TEFSKV19 19-piece 3/8 inch drive socket and plier set in EVA foam. Both are approved for live working up to 1000 volts, VDE approved and manufactured to IEC 60900.
• ELECTRICAL SCREWDRIVER SET IN THREE TIP STYLES — The TV18N case holds thirteen insulated drivers: five slotted in 0.4x2.5, 0.5x3.0, 0.8x4.0, 1.0x5.5 and 1.2x6.5, four Phillips PH0 to PH3 and four Pozidriv PZ0 to PZ3. On every slotted and Phillips screwdriver, two-colour integrated insulation shows at a glance if the outer layer is damaged, and bi-material handles give a secure, comfortable grip on terminal screws.
• ELECTRICAL PLIERS FOR CUTTING, GRIPPING AND STRIPPING — The case set carries a 160 mm (6.3 inch) and a 205 mm (8.1 inch) side cutting plier, a 200 mm (7.9 inch) combination plier, a 215 mm (8.5 inch) long nose plier and a wire stripping plier. The foam set adds a second side cutter, a 185 mm (7.3 inch) combination plier, a 210 mm (8.3 inch) bent long nose plier and another wire stripper, all with TPR grips.
• 3/8 INCH DRIVE INSULATED SOCKET SET — The TEFSKV19 brings twelve 6 point insulated sockets in 8, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19 and 20 mm, a 72 tooth insulated ratchet and two insulated extension bars of 75 mm (3 inch) and 150 mm (5.9 inch) for panel and busbar fasteners. Each tool sits in three-colour pre-cut high-density EVA foam in a FOAM3 module that fits Teng Tools service cases.
• CASE AND TRAY IN ONE ORDER — The MECCA PRO case is hard wearing, with a secure lock system so the lid closes correctly and a laid-out interior that shows where every tool belongs. The case set weighs 6140 g (13.5 lb) and the foam set 1896 g (4.2 lb). Both are regular catalogue products, shipped together from Fort Worth, Texas. Teng Tools hand tools carry a lifetime warranty against manufacturing defects.

Part number: BDL-ELEC-PRO