Tool Box Fixing Brackets

The Teng Tools TCF01 fixing brackets are designed to secure a Teng Tools 26 inch middle box to a Teng Tools roller cabinet. They bolt to the middle box and clip on to the lip of the roller cabinet, which creates a fixed connection between the two and prevents the middle box from tipping when the stack system is moved.

A roller cabinet is meant to travel: across the workshop, out to a vehicle, from one bay to the next. Anything stacked on it should travel with it as one unit. Without a fixing, a middle box only rests on the cabinet top and depends on its own weight to stay put. With these brackets fitted, the box and the cabinet move together and the stack stays stable while it rolls.

The bolt side fixes to the middle box and the clip side holds the cabinet lip, so the roller cabinet itself does not need anything fixed into it. That makes the brackets simple to fit when a middle box is added to a cabinet you already own.

These toolbox accessories are made for one size and one system: a Teng Tools 26 inch middle box on a Teng Tools roller cabinet. Fit is not stated for other sizes or other brands.

What you get: TCF01 fixing brackets for a 26 inch middle box, total weight 103 g (3.6 oz). Middle box and roller cabinet are not included.

• Made by Teng Tools to secure a Teng Tools 26 inch middle box to a Teng Tools roller cabinet. The brackets create a fixed connection between the two units, so a middle box that would otherwise only sit on the cabinet top is held in place as part of the stack and is no longer free to slide when the cabinet moves.
• Fitting is two steps. The bracket bolts to the middle box, then clips on to the lip of the roller cabinet. Once it is in place the middle box and the cabinet move together as one stack. The cabinet side is a clip rather than a bolt, so nothing has to be fixed into the roller cabinet itself to hold the box down.
• The job of these brackets is to prevent the middle box from tipping when the stack system is moved. A roller cabinet is built to roll, and a box standing on top of it goes with it only if something holds it. With the brackets fitted, pushing the stack to a vehicle, a bench or another bay does not leave the box free to shift.
• Designed for the Teng Tools storage system, specifically a 26 inch middle box on a Teng Tools roller cabinet. Check that your middle box is the 26 inch size before ordering. Fit is not claimed for any other box size or any other brand. Like other Teng Tools tool chest accessories, these are made for one place in one system.
• The brackets weigh 103 g (3.6 oz), so they add almost nothing to the stack. The middle box and the roller cabinet are not included: these brackets are the link between them. They suit anyone adding a middle box to an existing Teng Tools roller cabinet, or replacing a bracket that has gone missing from a stack.

Part number: TCF01