Automotive Tools
ESSENTIALS FOR ANY GARAGE
When working on motors and general servicing it is vital that you have the right tools ready when you are. Whether it is a spark plug socket or hose clamps you need tools that are great to work with and bring better results.
-
Teng Tools Hose Clip Driver -
Teng Tools Ball Joint Separator 29mm — AT191 -
Teng Tools 1/2" Heated Lambda Oxygen Sensor Socket 7/8" — AT375 -
Teng Tools T-Bar Spark Plug Socket -
Teng Tools Heel Bodywork Dolly — AT420 -
Teng Tools Drain Plug 8mm Square x 3/8 Square — DP0812 -
Teng Tools 1/2 Wheel Wrench 17 x 19mm — 1202 -
Teng Tools 1/2 Oil Filter Removal Tool Chain Type 120mm — 9120 -
Teng Tools Spark Plug Thread Cleaner 10 x 12mm — TRC1012 -
Teng Tools Spark Plug Boot Plier — SPBP20 -
Teng Tools Adjustable Engine Cylinder Honing Tool 50–180mm — AT040 -
Teng Tools Oil Filter Removal Tool Strap Type 160mm — 9123 -
Teng Tools Oil Filter Removal Plier 53 - 118mm — 409 -
Teng Tools 1/2 Heavy Duty Oil Filter Removal Tool 150mm — 9120HD -
Teng Tools Awl Straight — MDA180 -
Teng Tools Suction Lifter Triple — SL03 -
Teng Tools Gasket Scraper 22mm — MD-SCR -
Teng Tools Awl Round Tip — MDA-R -
Teng Tools Hose Clamp 19 - 57mm — AT090 -
Teng Tools Hook Tool 90° — MDP90 -
Teng Tools Panel Clip Removal Tool U-Shape Large — MDR08 -
Teng Tools Hook Tool 35° — MDP35 -
Teng Tools Magnetic Wing Cover — FC01 -
Teng Tools Deadblow Polyurethane Hammer 1500g — HMDH70PU
Common questions
What counts as an auto tool here?
The tools you want ready when working on motors and general servicing — spark plug sockets, hose clamp tools, brake and engine service tools. The range exists so the right tool is there when you are.
Does the hose clip driver fit common clips?
It fits most commonly used worm-drive hose clips (Jubilee-type), and the flexible shaft reaches clips buried in confined engine bays.
Are the impact accessories standard-compliant?
Yes — for example the 1/2" double-ended impact socket set includes a 75mm impact extension bar made DIN on the female end and ANSI on the male end, so it works both ecosystems.
Why do spark plugs need a special socket?
Spark plug sockets are deeper than standard sockets and hold the plug captive — typically with a rubber insert or magnet — so you can lower the plug into a deep well and start it by hand without dropping or cross-threading it. Common plug hex sizes are 5/8" (16mm) and 13/16" (21mm); check your engine's spec.
Should I torque wheel and engine fasteners?
Yes — critical automotive fasteners (wheel lugs, head bolts, suspension components) have manufacturer-specified torque values, and both under- and over-tightening cause failures. Use a torque wrench set to the vehicle manufacturer's specification; see our Torque Equipment range.
Torque values and calibration guidance are from the Teng Tools catalogue. Always follow the fastener manufacturer's specified torque.