9 Piece 1/2 Inch Drive Torx Bit Socket Set

The Teng Tools M1213TX is a 9 piece set of 1/2 inch drive TX bit sockets, supplied on a socket clip rail for easy storage as a set.

The sizes are TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55 and TX60. In the T notation many buyers use, that is T20, T25, T27, T30, T40, T45, T50, T55 and T60. Each torx bit socket has an S2 steel bit pressed in to a chrome vanadium socket body, and the socket has a satin finish for a better grip when handling. Teng Tools designed them for use with TX fastenings.

With the bit held in the socket, the TX sizes turn from a 1/2 inch drive ratchet, breaker bar or extension, which gives you more turning force and reach than a screwdriver and keeps the bit square in the fastener head. Fit the size, turn it, clip it back on the rail.

The clip rail keeps the nine sockets in size order, ready to drop into a toolbox drawer or onto a tool cart, and any gap in the row is a socket still out on the job. The set weighs 580 g (1.3 lb).

What you get: nine 1/2 inch drive TX bit sockets, TX20 to TX60, on a clip rail with socket clips. Ratchet, extensions and handles are not included. These are internal TX bits, not E-Torx sockets and not tamper-proof (security) bits.

• TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55 and TX60, one bit socket for each size, which in T notation is T20, T25, T27, T30, T40, T45, T50, T55 and T60. These are torx sockets for internal TX (star shaped) fastening heads, with the bit standing out of the socket to engage the recess in the screw or bolt head. They are not E-Torx (external) sockets.
• Each TX bit is S2 steel, pressed in to a chrome vanadium socket body, according to Teng Tools. Because the bit is fixed in the socket there is no separate bit holder to lose, and the bit turns straight from the drive. Think of it as a torx bit set that runs from a 1/2 inch ratchet instead of a screwdriver handle.
• The sockets have a satin finish, which Teng Tools says gives a better grip when handling the socket, so a socket is easy to pick off the rail, fit and take back off the fastener. Teng Tools designed them for use with TX fastenings, so each bit fits its own TX size rather than being a general purpose driver.
• The 1/2 inch square drive takes the 1/2 inch drive ratchet, breaker bar or extension you already use, and suits the larger TX sizes in this set, from TX40 up to TX60, where a fastener has been torqued tight. The smaller TX20 to TX30 sizes sit on the same drive, so the whole range turns from one handle without an adapter.
• The set comes on a clip rail with socket clips for easy storage as a set, each size on its own clip in order from smallest to largest. An empty clip shows which TX size has not come back from the job. The set weighs 580 g (1.3 lb) as supplied. Ratchet and extensions are not included.

Part number: M1213TX