3/4 Inch Drive Breaker Bar, 19 Inch Flex Handle 480 mm

The Teng Tools M340070-C is a 3/4 inch drive flex handle, the tool US mechanics also call a breaker bar. It has an articulated head, a ball detent retainer on the drive end and an ergonomic bi-material grip, and Teng Tools lists it as a 19 inch flex handle, measuring 480 mm (18.9 in) long.

The head pivots, so the handle can sit at an angle to the socket and clear parts around the fastener. That improves access in confined or angled applications. The ball detent retainer gives a secure socket connection in high torque situations, so the socket stays on while you position the bar.

The handle is constructed from chrome vanadium with a satin finish for strength and control and adheres to DIN 3122F standards, according to Teng Tools. The bi-material grip is designed for comfort during prolonged use. The handle weighs 1902 g (4.2 lb).

Use it with 3/4 inch drive sockets to free large, tight fasteners, then switch to a ratchet to run them out. Buyers also search for it as a socket breaker bar or a wrench breaker bar, and among breaker bars it is the 3/4 inch drive length for large fasteners. It takes any 3/4 inch drive socket or accessory.

What you get: 1 x 3/4 inch drive flex handle, 480 mm (18.9 in). Sockets are not included.

• The square drive head pivots on the end of the bar, so the handle can be swung to the angle that clears whatever surrounds the fastener. The articulating head improves access in confined or angled applications, such as large nuts and bolts where a fixed bar would hit surrounding parts before it has turned far enough.
• A ball detent retainer on the drive end gives a secure socket connection in high torque situations, so a heavy 3/4 inch drive socket stays on the 3/4 drive breaker bar while you set it on the fastener and lean on the handle. There is no ratcheting mechanism and no safety lock, just a solid square drive on a pivoting head.
• Teng Tools lists this as a 19 inch flex handle for 3/4 inch drive, and it measures 480 mm (18.9 in) long. The length gives the leverage to start large, tight fasteners before you hand the job over to a ratchet. Free the fastener with the bar, then run it out with the ratchet.
• Constructed from chrome vanadium with a satin finish for strength and control, and made to DIN 3122F standards according to Teng Tools. The ergonomic bi-material grip is designed for comfort during prolonged use, which counts when a run of large fasteners has to come off one after another.
• The handle weighs 1902 g (4.2 lb), which is worth knowing when you carry it to the job or plan where it hangs in a cabinet. It takes any 3/4 inch drive socket or accessory. Teng Tools lists no tethering facility and no T-drive facility on this handle. Sockets are not included, so it pairs with your existing 3/4 inch drive socket range.

Part number: M340070-C