Oil Pressure Sensor Socket 11/16 Inch

The Teng Tools AT370 is a 3/8 inch drive socket for oil pressure sender units, with an 11/16 inch opening. Teng Tools designs it specifically for removing and installing oil pressure senders, the part also sold as an oil pressure sensor or switch.

A long slot runs down the side wall of the socket, as the Teng Tools datasheet image shows, so the socket can go over the wire and terminal on top of the sender. The 3/8 inch drive takes a standard 3/8 inch drive ratchet or extension. The head is fixed, not flexible.

The socket is chrome vanadium with a satin finish. It is 74 mm (2.9 in) long and weighs 215 g (7.6 oz). It is one of the Teng Tools special auto sockets for various applications, filed under Engine Tools, and the same socket is supplied in the Teng Tools TTSS07 set.

Senders are made in more than one size. This socket is 11/16 inch, so check the hex on your sender before you order. It suits a home garage, a service bay or a fleet workshop that keeps a dedicated sender socket in the engine tools drawer rather than reaching for a general deep socket each time.

What you get: one 3/8 inch drive oil sender unit socket, 11/16 inch. Ratchet, extension and the TTSS07 set are not included.

• The socket opening is 11/16 inch. Sender units come in more than one size, so check the hex on the one you are changing before you order: this oil sensor socket suits an 11/16 inch sender. Teng Tools states the size in inches on the datasheet.
• Teng Tools designs this socket specifically for removing and installing oil pressure sender units, the part also called an oil pressure sensor or switch. The datasheet gives its application as oil sender, and lists it among the Teng Tools special auto sockets for various applications, so it is a dedicated socket rather than a general one.
• A long slot runs down the side of this oil pressure socket, as the Teng Tools datasheet image shows. The slot lets the socket pass over the wire and terminal on top of the sender, so the socket can sit fully down on the sender hex. It is a single-purpose socket, kept for that one job on the engine.
• Made from chrome vanadium with a satin finish. The body is 74 mm (2.9 in) long and the socket weighs 215 g (7.6 oz). It has a fixed head, not a flexible one. Teng Tools files it under Engine Tools, among its special auto sockets for various applications.
• The 3/8 inch square drive takes a 3/8 inch drive ratchet or extension, which are not included. Teng Tools supplies the same oil sender unit socket in its TTSS07 set, so buy this one singly to replace a lost socket or to add the size to an engine tools drawer.

Part number: AT370