Nut Splitter Set 2 Piece, Nut Breaker and Bolt Buster

The Teng Tools NS02 takes off nuts that a wrench or socket can no longer shift. When a nut is stripped, rusted solid, seized or damaged, splitting it is faster than fighting it, and it keeps heat away from paint, seals, brake lines and wiring the way a grinder or a torch cannot.

Two splitters are supplied. The smaller covers 5-20mm (0.20-0.79 in), the larger 14-27mm (0.55-1.06 in), so between them the set spans 5-27mm (0.20-1.06 in), measured across the flats. The ranges overlap between 14 and 20mm, which means a nut at the join can be taken with either tool, whichever reaches the space better.

In use, slide the body over the nut so the blade sits square against one of the flats, then tighten the threaded blade with a wrench. The blade drives into the flat and parts the nut. The nut is split rather than turned, which is why the stud comes through intact and can be reused. On a particularly stubborn nut, reposition the splitter on another flat and take a second cut.

It earns its place wherever a fastener has seen enough salt, weather or heat that the corners have gone and a socket simply spins on it.

Two piece set, 533 g. Designed in Sweden, made in Taiwan. The same two splitters are supplied in the Teng Tools TTSN11 and TEZSN06 service sets.

• Two splitters covering 5-20mm (0.20-0.79 in) and 14-27mm (0.55-1.06 in), measured across the flats
• Splits seized, rusted, stripped and rounded nuts that a socket can no longer grip
• The nut is split rather than turned, so the threaded stud is not damaged and can be reused
• Reaches from 5mm (0.20 in), where the four piece kits in this category start at 9mm (0.35 in)
• Set weight 533 g (1.2 lb). Designed in Sweden, made in Taiwan. Also supplied in TTSN11 and TEZSN06

Part number: NS02