Impact Socket Retaining Pin 3 x 25 mm

The Teng Tools P92325 is a retaining pin for impact sockets, 3 x 25 mm, of the DIN standard type. It is used with a retaining ring to hold the impact socket on the square drive of the impact gun.

Pin and ring retention is two parts working together: the pin and the ring that holds it in place. This listing is the pin only. The retaining ring is not included, so reuse your existing ring or order one separately.

Teng Tools supplies the same pin in the following sets: TEA9216AF, T9240, TT9120DN, TT9212, T9218LAF, TTEISK73, TT9207, T9222L, T9218AF, T9222, TT9207A, TEA9214LAF, TTEISK103, 9214, 9214L, 9208 and 9208L. It is the direct spare for any of them when a pin has gone missing.

The pin is 25 mm (0.98 in) long and weighs 1 g (0.04 oz). Because a pin this small is easy to lose during a socket change, it makes sense to keep spares with your impact sockets.

What you get: one 3 x 25 mm retaining pin for impact sockets. Retaining ring, impact sockets and impact gun are not included.

• This is the pin half of pin and ring socket retention. Used with a retaining ring, it holds the impact socket on the square drive of the impact gun, so the socket stays on the tool instead of relying on the drive alone. The retaining ring is a separate part and is not included with this pin.
• Teng Tools gives the size as 3 x 25 mm, with a length of 25 mm (0.98 in). Check the pin against the one you are replacing, or against the fixing hole in your socket and square drive, before ordering, so the replacement sits fully through both parts with the ring over it.
• The pin is a DIN standard type. Teng Tools describes it as an accessory for impact socket sets that keeps sockets securely attached to the square drive during high-torque work. It is a single loose pin with nothing to assemble, ready to fit with your existing ring.
• Teng Tools supplies this pin in its sets TEA9216AF, T9240, TT9120DN, TT9212, T9218LAF, TTEISK73, TT9207, T9222L, T9218AF, T9222, TT9207A, TEA9214LAF, TTEISK103, 9214, 9214L, 9208 and 9208L. If one of those sets has lost a pin, this is the matching spare part.
• A retaining pin weighs 1 g (0.04 oz) and is one of the easiest parts in an impact set to drop and lose while changing sockets. A few spares in the drawer or the set case mean a socket can be secured again straight away, instead of waiting on a part. Sold as a single pin.

Part number: P92325