240-Piece EVA Foam General Hand Tool Kit

The Teng Tools TCW707EV-KIT3 is a 240 piece metric kit in EVA foam, supplied with a 26 inch Classic roller cabinet. The cabinet is red, has 7 drawers and is part of the Teng Tools Classic mobile storage range. Every set comes in its own pre-cut foam module with a shaped cut-out for each tool and the size marked beside it, so the drawers open on a layout that shows straight away what is missing.

Socket coverage runs across three drives. The 1/4 inch drive set has 89 pieces: a 72 tooth ratchet, regular and deep 6 point metric sockets, TX and hex bit sockets, extension bars, adaptors and 25 mm 1/4 inch hex bits. The 3/8 inch drive set has 36 pieces including 6 point metric sockets, TX and hex bit sockets and a 10 inch spinner handle. The 1/2 inch drive set has 27 pieces: regular and deep 12 point metric sockets, extension bars, adaptors and a 72 tooth ratchet. A 13 piece extension bar set adds reach.

Wrenches run from 5.5 to 32 mm across two combination sets of 15 and 7 pieces, plus four adjustable wrenches. Pliers, screwdrivers, T-handle hex and TX/TPX keys and a 14 piece punch and chisel set cover the rest of a working day.

This is a tool chest with tools already in it, built for a mechanic who wants foam tool control from day one rather than a cabinet to fill later.

What you get: one 26 inch Classic 7 drawer red roller cabinet (TCW707EV) and thirteen foam sets totalling 240 pieces, with metric sockets and combination wrenches. Not included: SAE sockets or wrenches, top tool chest, torque wrenches, impact sockets and power tools.

• Every set sits in a pre-cut Teng Tools EVA foam inlay with a cut-out for each tool and its size marked beside it. A missing tool leaves an empty pocket you can see from across the bay, so an end of shift check takes a glance instead of a count. The foam modules are FOAM2 and the longer FOAMX4 format.
• A 26 inch Teng Tools Classic roller cabinet in red with 7 drawers, supplied with the foam sets that make up all 240 pieces. You get the cabinet and the tool layout in one order, with no gaps to fill one emergency purchase at a time, and each module lifts out and goes to the job as one unit.
• An 89 piece 1/4 inch drive set with a 72 tooth ratchet, regular and deep 6 point sockets, TX and hex bit sockets, extensions, adaptors and 25 mm hex bits; a 36 piece 3/8 inch drive 6 point set with TX and hex bit sockets and a 10 inch spinner handle; and a 27 piece 1/2 inch drive 12 point set, regular and deep, with a 72 tooth ratchet and extension bars.
• WRENCHES 5.5 TO 32 MM: A 15 piece metric combination wrench set from 5.5 to 19 mm and a 7 piece set from 20 to 32 mm, ring ends offset at 15 degrees for flat surfaces. A 4 piece adjustable wrench set holds 6, 8 and 10 inch regular wrenches and an 8 inch wide jaw wrench. A 13 piece extension bar set rounds out the socket side.
• A 5 piece plier set with TPR grips including a side cutter, an 11 piece screwdriver set in flat, Phillips and Pozi, 5 long reach flat and Phillips screwdrivers, 7 T-handle ball point hex keys, 7 T-handle TX/TPX keys for tamper proof fasteners, and a 14 piece punch and chisel set with pin punches, cold chisels and an automatic center punch.

Part number: TCW707EV-KIT3